“This site contains affiliate links for which OEMDTC may be compensated” |
February 28, 2019 NHTSA CAMPAIGN NUMBER: 19V143000
Control Arm May Separate From Steering Knuckle
A control arm separation could increase the risk of a crash.
NHTSA Campaign Number: 19V143
Manufacturer Chrysler (FCA US LLC)
Components SUSPENSION
Potential Number of Units Affected 47,771
Summary
Chrysler (FCA US LLC) is recalling certain 2018 Chrysler Pacifica and Pacifica hybrid vehicles. The right front lower control arm may separate from the steering knuckle.
Remedy
Chrysler will notify owners, and dealers will inspect the right front knuckle and lower control arm for damage, replacing the components as necessary. The right front lower control arm knuckle pinch bolt will be replaced with a larger-diameter pinch bolt. These repairs will be performed free of charge. The recall began April 26, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler’s number for this recall is V15.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
April 2019
Dealer Service Instructions for:
Safety Recall V15 / NHTSA 19V-143 Ball Joint
Remedy Available
2018 | (RU) | Chrysler Pacifica |
NOTE: This recall applies only to the above vehicles. Some vehicles may have been identified as not involved in this recall and therefore have been excluded from this recall.
Subject
The right front lower control arm knuckle pinch bolt on about 47,780 of the above vehicles may experience a loss of clamp load at the right front lower control arm ball joint, potentially resulting in the right front lower control arm ball joint separating from the steering knuckle. A separation of the right front lower control arm from the steering knuckle may allow the knuckle to rotate while driving resulting in a loss of directional control, which may increase the risk of a crash without prior warning.
Repair
Inspect the right front lower ball joint stud for proper installation into the steering knuckle. If properly installed, replace the pinch bolt with a larger-diameter pinch bolt. If the ball joint stud was NOT properly installed into the steering knuckle, replace the lower control arm, steering knuckle and install the larger-diameter pinch bolt.
Alternate Transportation
Dealers should attempt to minimize customer inconvenience by placing the owner in a loaner vehicle if the vehicle must be held overnight.
Parts Information
Description | Part Number |
Lower Ball Joint Pinch Bolt Kit | CSFJV151AA |
Each package contains the following components: | |
Description | Quantity |
I-Sheet | 1 |
Pinch Bolt | 1 |
Washer, Pinch Bolt | 1 |
Pinch Nut | 1 |
Very few vehicles will require additional parts. If after inspection it is determined that the lower control arm and knuckle replacement is required, please refer to Star Parts for the correct part numbers.
Part Number | Quantity | Description |
Star Parts | 1 | ARM, Lower Control, right Front |
Star Parts | 1 | KNUCKLE, right Front Suspension |
Star Parts | 4 | Bolt, Wheel Bearing to Knuckle M10 |
Star Parts | 1 | NUT, Axle Half Shaft, M22 |
Star Parts | 1 | BOLT, Wheel Speed Sensor (Includes Lubricant) |
Star Parts | 2 | Bolt, lower control arm to subframe front M16 |
Star Parts | 2 | Nut, lower control arm to subframe front M16 |
Star Parts | 2 | Bolt, lower control arm to subframe rear M12 |
Star Parts | 1 | BOLT, shear bracket M16 |
Star Parts | 1 | BOLT, shear bracket M14 |
Star Parts | 1 | BOLT, shear bracket M10 |
Parts Return
No parts return required for this campaign.
Special Tools
The following special tool or equivalent may be necessary to separate the tie rod end from the steering knuckle only if inspection determines that the steering knuckle must be replaced:
➢ 9360 | Ball Joint Remover |
Service Procedure
A. Inspect Right Front Lower Ball Joint Stud Insertion
- Raise and support the vehicle.
- Inspect the right side lower control arm ball joint stud insertion into the steering knuckle. The ball joint stud should be fully inserted into the steering knuckle. The pinch bolt should be securely tight with no observable movement of the pinch bolt and no observable movement of ball joint stud in the steering knuckle (Figure 1).
- Is the ball joint stud fully inserted into the steering knuckle?
- YES: The ball joint stud is fully inserted. Continue with Step 5.
- NO: Proceed to Section Replace Lower Control Arm and Knuckle.
- Is the ball joint stud and pinch bolt securely tight?
- YES: Ball stud and pinch bolt are securely tight. Continue with Step 6.
- NO: Proceed to Section Replace Lower Control Arm and Knuckle.
- Remove and discard the old ball joint stud pinch bolt and nut.
- Install the NEW ball joint stud pinch bolt, washer, and nut as shown in (Figure 2).
NOTE: The washer must be located under the bolt head.
NOTE: The bolt head must be facing toward the caliper side of the steering knuckle.
- Hold the ball joint pinch bolt from rotating and tighten the nut to 110 N·m (81 ft. lbs.).
- Clean the wheel mounting surfaces removing any corrosion or dirt.
- Install all five wheel mounting lug nuts, and lightly snug all five wheel mounting lug nuts. Do not tighten at this time.
- Remove the support and lower the vehicle.
- Progressively tighten the wheel mounting lug nuts, in a star pattern to 135 N·m (100 ft. lbs.).
- Return the vehicle to inventory or the customer.
B. Replace Lower Control Arm and Knuckle
- Remove the right side lower sill closeout panels (Figure 4).
- While a helper applies the brakes to keep hub from rotating, remove and DISCARD the half shaft hub nut (Figure 5).
- Remove and SAVE the two bolts securing the brake caliper adapter bracket to steering knuckle (Figure 6).
- Carefully remove and support the brake caliper mounting bracket assembly aside taking care not to over extend the brake hose (Figure 7).
- Remove the brake rotor from the wheel bearing hub (Figure 7).
- Remove and SAVE the three bolts securing the brake rotor splash shield to the steering knuckle, then remove the splash shield (Figure 8).
- Remove and DISCARD the bolt securing the wheel speed sensor to the wheel bearing (Figure 9).
- Remove the wheel speed sensor from the wheel bearing hub (Figure 9).
- Remove and SAVE the bolt securing the wheel speed sensor wire harness retainer to the steering knuckle (Figure 9).
- Position the wheel speed sensor and wire harness aside out of the way.
- Remove and SAVE the outer tie rod nut at the steering knuckle (Figure 10).
- Use special tool 9360 Ball Joint Remover or equivalent, to separate the outer tie rod from the steering knuckle. Take care to not damage the outer tie rod end rubber boot (Figure 11).
- Remove and SAVE the two nuts and bolts securing the suspension strut to the steering knuckle (Figure 12).
- Remove and DISCARD the three bolts M10, M14, M16 securing the shear bracket. Remove and SAVE the shear bracket (Figure 13).
- Remove and DISCARD the two M12 bolts securing the rear of the lower control arm to the subframe (Figure 13).
- Remove and DISCARD the two M16 nuts and bolts securing the front of the lower control arm to the subframe (Figure 13).
- Remove the lower control arm and knuckle assembly from the vehicle while separating the wheel bearing hub from the outer constant velocity (C/V) joint splined shaft.
NOTE: Do not allow the half shaft to hang by the inner C/V joint; it must be supported to keep the joint from separating during this operation.
- Remove and DISCARD the four bolts securing the wheel bearing hub to the steering knuckle (Figure 14).
- Remove and SAVE the wheel bearing hub from the steering knuckle (Figure 14).
- DISCARD the steering knuckle and lower control arm assembly.
- Position the NEW front lower control arm against the subframe (Figure 15).
- Install two NEW bolts and nuts M16 securing the front of the lower control arm to the subframe. Do not tighten bolts and nuts at this time (Figure 15).
- Install two NEW bolts M12 securing the rear of the lower control arm to the subframe. Do not tighten bolts at this time (Figure 15).
- Position the shear bracket and install three NEW bolts M16, M14, M10 securing the shear bracket. Do not tighten the bolts at this time (Figure 15).
- Tighten the two M16 bolts and nuts securing the front of the lower control arm to the subframe to 250 N·m (184 ft. lbs.) (Figure 15).
- Tighten the two M12 bolts securing the rear of the lower control arm to the subframe to 105 N·m (77 ft. lbs.) (Figure 15).
- Tighten the M16 bolt securing the shear bracket to the subframe to 169 N·m (125 ft. lbs.) (Figure 15).
- Tighten the M14 bolt securing the shear bracket and lower control arm to the vehicle body to 160 N·m (118 ft. lbs.) (Figure 15).
- Tighten the M10 bolt securing the shear bracket to the vehicle body to 50 N·m (37 ft. lbs.) (Figure 15).
- Clean any grease and oil residue from the steering knuckle ball joint stud hole and lower control arm ball joint stud.
- Install the NEW steering knuckle onto the lower ball joint stud and verify it is in the correct position with the ball joint stud visible at the upper portion of the mounting hole before installing the NEW pinch bolt (Figure 16).
WARNING: Make sure lower control arm ball joint stud is fully inserted into knuckle before pinch bolt is inserted into knuckle. Only ball joint stud rubber boot should be visible below the knuckle; stud should not be visible (Figure 16). Failure to fully and properly insert ball joint stud could lead to wheel separation and loss of mobility and could result in personal injury or death.
- Install the NEW ball joint stud pinch bolt, washer, and nut as shown in (Figure 17).
NOTE: The washer must be located under the bolt head.
NOTE: The bolt head must be facing toward the caliper side of the steering knuckle.
- Hold the ball joint pinch bolt from rotating and tighten the nut to 110 N·m (81 ft. lbs.).
- Position the wheel bearing hub into the steering knuckle.
- Install four NEW bolts securing the wheel bearing hub to the knuckle. Tighten the bolts to 57 N·m (44 ft. lbs.) (Figure 14).
- Position the steering knuckle to the suspension strut, then install the strut mounting bolts and nuts (Figure 12).
Bolts are splined, do not attempt to rotate bolts. Tighten the nuts to:
(Built Before January 12, 2018) = 202 N·m (149 ft. lbs.)
(Built On or After January 12, 2018) = 98 N·m (72 ft. lbs.)
- Clean any grease and oil residue from the steering knuckle tie rod stud hole and tie rod joint stud. Then install the tie rod end stud into the steering knuckle.
- Install the nut onto the outer tie rod end stud. Hold the stud to prevent it from rotating while tightening the nut to 50 N·m + 90° (37 ft. lbs. + 90°) (Figure 10).
- Install the wheel speed sensor wire harness retainer and bolt to the steering knuckle. Tighten the bolt to 8 N·m (71 in. lbs.) (Figure 9).
- Install the wheel speed sensor with lubricant and NEW bolt to the wheel bearing hub. Tighten the bolt to 8 N·m (71 in. lbs.) (Figure 9).
- Install the brake rotor splash shield to the steering knuckle and install the three mounting bolts securing the splash shield. Tighten the bolts to 8 N·m (71 in. lbs.) (Figure 8).
- Install the brake rotor to the wheel bearing hub (Figure 7).
- Install the brake caliper adapter bracket with brake caliper to the steering knuckle. Install the two mounting bolts and tighten the bolts to 202 N·m (149 ft. lbs.) (Figure 6).
- While a helper applies the brakes to keep hub from rotating, install a NEW half shaft hub nut and tighten the nut to 163 N·m (120 ft. lbs.) (Figure 5).
- Clean wheel mounting surfaces of any corrosion or dirt.
- Install all five wheel mounting lug nuts and lightly snug all five wheel mounting lug nuts. Do not tighten at this time.
- Remove the support and lower the vehicle.
- Progressively tighten the wheel mounting lug nuts, in a star pattern to 135 N·m (100 ft. lbs.).
- Position the vehicle on an alignment rack.
- Install the right side lower sill closeout panels (Figure 4).
- Return the vehicle to inventory or the customer.
SEOCONTENT-START
Completion Reporting and Reimbursement
Claims for vehicles that have been serviced must be submitted on the DealerCONNECT Claim Entry Screen located on the Service tab. Claims paid will be used by FCA to record recall service completions and provide dealer payments.
Use one of the following labor operation numbers and time allowances:
Labor Operation Time
Number | Allowance |
Inspect Lower Control Arm 02-V1-51-82
Connection to Steering Knuckle and Replace Ball Joint Pinch Bolt |
0.3 hours |
Inspect and replace Lower Control Arm, 02-V1-51-83
Steering Knuckle, Ball Joint Pinch Bolt and Perform a Front End Alignment (Set Toe Only) |
2.0 hours |
Floor Plan Reimbursement 95-95-95-97 | Calculate |
See Below |
Floor Plan Reimbursement represents the vehicle’s average daily allowance (see table below) multiplied by the number of days the vehicle was in dealer inventory and not available for sale. This reimbursement is limited to the number of days from the date of the stop sale to the date that the remedy was made available. Note: If the vehicle was received by your dealership (KZX date) AFTER the stop sale date, you will use the KZX date instead of the stop sale date. For this Recall, the stop sale was initiated on 03/07/2019and the remedy was made availableon 04/25/2019, therefore, the number of days cannot exceed 49days.
Vehicle | Average Daily Allowance | |
2018 (RU) Chrysler Pacifica |
Add the cost of the recall parts package plus applicable dealer allowance to your claim.
NOTE: See the Warranty Administration Manual, Recall Claim Processing Section, for complete recall claim processing instructions.
Dealer Notification
To view this notification on DealerCONNECT, select “Global Recall System” on the Service tab, then click on the description of this notification.
Owner Notification and Service Scheduling
All involved vehicle owners known to FCA are being notified of the service requirement by first class mail. They are requested to schedule appointments for this service with their dealers. A generic copy of the owner letter is attached.
Vehicle Lists, Global Recall System, VIP and Dealer Follow Up
All involved vehicles have been entered into the DealerCONNECT Global Recall System (GRS) and Vehicle Information Plus (VIP) for dealer inquiry as needed.
GRS provides involved dealers with an updated VIN list of their incomplete vehicles. The owner’s name, address and phone number are listed if known. Completed vehicles are removed from GRS within several days of repair claim submission.
To use this system, click on the “Service” tab and then click on “Global Recall System.” Your dealer’s VIN list for each recall displayed can be sorted by: those vehicles that were unsold at recall launch, those with a phone number, city, zip code, or VIN sequence.
Dealers must perform this repair on all unsold vehicles before retail delivery. Dealers should also use the VIN list to follow up with all owners to schedule appointments for this repair.
Recall VIN lists may contain confidential, restricted owner name and address information that was obtained from the Department of Motor Vehicles of various states. Use of this information is permitted for this recall only and is strictly prohibited from all other use.
Additional Information
If you have any questions or need assistance in completing this action, please contact your Service and Parts District Manager.
Customer Services / Field Operations
FCA US LLC
This notice applies to your vehicle,
[Model Year and Model] VIN XXXXXXXXXXXXXXXXX V15/NHTSA 19V-143
LOGO
VEHICLE PICTURE
YOUR SCHEDULING OPTIONS
- Call the FCA Recall Assistance Center at 1-800-853-1403. An agent can confirm part availability and help schedule an appointment
- Visit recalls.mopar.com, scan the QR code below, or download the Mopar Owner’s Companion App.
QR Code
Get access to recall notifications, locate your nearest dealer, and more through this website or Mopar Owner’s Companion App. You will be asked to provide your Vehicle Identification Number (VIN) to protect and verify your identity. The last eight characters of your VIN are provided above.
DEALERSHIP INSTRUCTIONS
Please reference Safety Recall V15.
IMPORTANT SAFETY RECALL
Dear [Name],
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
FCA has decided that a defect, which relates to motor vehicle safety, exists in certain [2018 Model Year (RU) Chrysler Pacifica] vehicles.
It is extremely important to take steps now to repair your vehicle to ensure the safety of you and your passengers.
WHY DOES MY VEHICLE NEED REPAIRS?
The right front lower control arm knuckle pinch bolt on your vehicle [1] may experience a loss of clamp load at the right front lower control arm ball joint, potentially resulting in the right front lower control arm ball joint separating from the steering knuckle. A separation of the right front lower control arm ball joint from the steering knuckle may allow the knuckle to rotate while driving resulting in a loss of directional control, which may increase the risk of a crash without prior warning.
HOW DO I RESOLVE THIS IMPORTANT SAFETY ISSUE?
FCA will repair your vehicle [2] free of charge (parts and labor). To do this, your dealer will inspect the right front knuckle and lower control arm for damage and replace as needed. In addition, your dealer will replace the right front lower control arm knuckle pinch bolt with a larger-diameter pinch bolt. The estimated repair time is 30 minutes or 2 hours if lower control arm requires replacement. In addition, your dealer will require your vehicle for proper check-in, preparation, and check-out during your visit, which require more time. Your time is important to us, so we recommend that you schedule a service appointment to minimize your inconvenience. Please bring this letter with you to your dealership.
TO SCHEDULE YOUR FREE REPAIR,
CALL YOUR CHRYSLER, DODGE, JEEP OR RAM DEALER TODAY
WHAT IF I ALREADY PAID TO HAVE THIS REPAIR COMPLETED?
If you have already experienced this specific condition and have paid to have it repaired, you may visit www.fcarecallreimbursement.com to submit your reimbursement request online. [3] Once we receive and verify the required documents, reimbursement will be sent to you within 60 days. If you have had previous repairs performed and/or already received reimbursement, you may still need to have the recall repair performed.
We apologize for any inconvenience, but are sincerely concerned about your safety. Thank you for your attention to this important matter.
Customer Assistance/Field Operations
FCA US LLC
Mr. Mrs. Customer
1234 Main Street
Hometown, MI 48371
[1] If you no longer own this vehicle, please help us update our records. Call the FCA Recall Assistance Center at 1-800-853-1403 to update your information.
[2] If your dealer fails or is unable to remedy this defect without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC 20590, or you can call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-4249153), or go to safercar.gov.
[3] You can also mail in your original receipts and proof of payment to the following address for reimbursement consideration: FCA Customer Assistance, P.O. Box 21-8004, Auburn Hills, MI 48321-8007, Attention: Recall Reimbursement.
Note to lessors receiving this recall notice: Federal regulation requires that you forward this recall notice to the lessee within 10 days.
SEOCONTENT-END
2 Affected Products
Vehicles
MAKE | MODEL | YEAR |
CHRYSLER | PACIFICA | 2018 |
CHRYSLER | PACIFICA HYBRID | 2018 |
8 Associated Documents
Remedy Instructions and TSB
RCRIT-19V143-8077.pdf 1849.169KB
Manufacturer Notices(to Dealers,etc) – 03/07/2019 New Safety Recall Advanced Communication – V15
RCMN-19V143-0008.pdf 102.117KB
Defect Notice 573 Report
RCLRPT-19V143-9554.PDF 214.063KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V143-5955.pdf 518.185KB
Recall Quarterly Report #1, 2019-2
RCLQRT-19V143-1223.PDF 211.148KB
ISSUED Renotification Notice
RCRN-19V143-8292.pdf 136.145KB
Recall Quarterly Report #2, 2019-3
RCLQRT-19V143-8564.PDF 211.251KB
Recall Quarterly Report #3, 2019-4
RCLQRT-19V143-7600.PDF 211.345KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V143&docType=RCL
- DEEP & EFFECTIVE CLEANING: Foaming gel sticks for deep cleaning
- SPECIALIZED FOR BLACK WHEELS: Formulated for all black wheel finishes
- POWERFUL & SAFE: Maximum cleaning yet gentle on wheels
- CLINGING ACTION: Formula dwells on the surface for more effective cleaning
- VERSATILE USE: Safely and effectively cleans glossy, matte, satin, and black chrome wheels
- ✅ ELIMINATES DIRT, BROWNING, AND BRAKE DUST - Which part of your car takes the biggest beating? Your wheels & Tires! Between the heat, elements, and constant brake contaminants your wheels are almost immediately dirty. Adam’s Wheel & Tire Cleaner is a specifically formulated chemical designed to target heavy brake dust and restore your tires back to factory color.
- ✅ SAFE ON MANY FINISHES - Safe on clear-coated, powder-coated, chrome, alloy, and painted wheels. Most wheel cleaners can be harmful to your wheel finish and dissolve more than what you wanted to clean off! Adam’s Polishes Wheel & Tire Cleaner gets to work fast and dissolves stubborn metallic contamination.
- ✅ GET RID OF BROWN TIRES - If you’re happy with brown, old and decrepit tires, look away! If you’re wanting to thoroughly clean your vehicle’s shoes and make them look like new again, then look no further! Adam's Wheel & Tire Cleaner contains a blend of alkaline-concentrated solvents and surfactants to create a high sudsing formula and removes silicones, greases, wax build-up, polymers, and any previously applied dressings to leave your tires and wheels looking new.
- ✅ EXTEND YOUR TIRE DRESSINGS LIFE - Adam’s Wheel & Tire Cleaner is a detailing essential for any user, from rookie to professional. When investing in premium protective options, high foaming soaps, and ultra-premium microfiber towels, your vehicle's shoes need to be kept clean to not take away from the rest of the vehicle. If you choose not to clean your tires, your tire dressings have no chance of sticking around. Clean your tires before with Wheel & Tire Cleaner to maximize your tire shine.
- ✅ 110% SATISFACTION GUARANTEE - At Adam’s, we strive to bring the BEST waxes, sealants, ceramic coatings, microfiber towels, wash mitts, garage tools, accessories, detailing kits, sponges, applicators and other high-quality car cleaning products to our customers. If you don’t agree & are not satisfied, let us know and we’ll do everything we can to make it right!
- This acid-free wheel, tire, and brake cleaner is safe for all wheel types and finishes, including, steel, aluminum, chrome, paint, powder coat, and more. This cleaner is harsh on removing brake dust, iron, and road fallout, but easy on your rims.
- Restore your tires and wheels to a factory-fresh color. Just spray it on, let it clean, and agitate with a soft bristle brush on the face, barrel, tire, and brake parts to break up stubborn contaminants. Just spray with water afterward and clean with a microfiber towel.
- Can be used straight from the bottle or diluted in a foam sprayer. This product can be diluted in any foam sprayer to create a generous foram that easily lifts first, brake dust, and road contaminants from the wheel and tire.
- Leaves a protective coating that helps repel any future tarnishing, staging, or grime buildup. In addition, you can easily and safely apply wheel and tire sealants to extend the life of your clean and shiny wheels.
- TOUGH ON GRIME - Signature Series is a strong citrus-based wheel cleaner that is tough on brake dust and filth, but gentle and safe for most wheel finishes and materials.
- NATURAL CITRUS CLEANING POWER - Signature Series Wheel Cleaner is blended with natural citrus extracts for powerful cleaning of dirt, grime, and brake dust. Brake dust contains corrosive iron and carbon deposits that can destroy wheels.
- SUPER CONCENTRATED - Adding Signature Series to normal wheel cleanings reduces buildup and corrosion and protects a pristine showroom shine; Clean rubber tire sidewalls to ensure tire shine dressings last longer and look better!
- WE MAKE LOOKING GOOD EASY - Spray the cleaner directly onto alloy wheels, plastic wheel covers, brake parts, suspension parts, plastic fender liners, or undercarriage parts to break down caustic grime and filth.
- THE GO TO BRAND IN CAR CARE - Beginners and professionals alike choose Chemical Guys, not only for the finest car care products, but the world class customer support and vast detailing knowledge Chemical Guys is more than a brand it's a lifestyle with a worldwide following
- ✅ WHY CHOOSE ADAM’S WHEEL CLEANER? - Which part of your car takes the biggest beating? Your wheels! Due to constant heat, elements, & constant brake contaminants, your wheels are almost always dirty. Adam’s wheel cleaning chemical formula was specifically formulated to target & eliminate heavy brake dust and leave your wheels spotless!
- ✅ ADVANCED CHEMICAL TECHNOLOGY - Our Wheel Cleaner was made to compliment your arsenal of car cleaning supplies. Every basic auto detailing kit needs an effective wheel cleaner, car wash soap, tire shine, & some sort of paint protection. This state of the art wheel cleaner is a simple spray & agitate formula. This chemical is certain to be the best wheel cleaner and brake dust remover that you have ever used.
- ✅ CAR CLEANING MADE EASY - Most wheel cleaners can be harmful to your wheel finish and dissolve more than what you wanted to clean off! Adam’s Polishes Wheel Cleaner gets to work fast and dissolves stubborn metallic contamination. Simply spray our Wheel Cleaner & watch as the brake dust bleeds bright purple & falls off! This acid-free and pH neutral formula penetrates dirt and grime at the source and makes your wheel cleaning time significantly shorter!
- ✅ IS IT SAFE FOR MY WHEEL FINISH? - Adam’s Wheel Cleaner is safe on almost all wheel finishes, which includes clear-coated, powder-coated, chrome, alloy, and painted wheels. However, it may not be safe on anodized raw aluminum, polished aluminum wheels, and aftermarket bare metallic wheels. If you are not sure reach out to us by sending us a message or simply try our Eco Wheel Cleaner or Wheel & Tire Cleaner!
- ✅ 110% SATISFACTION GUARANTEE & USA MADE - At Adam’s, we strive to bring the BEST car cleaning supplies, auto detailing kits, washing accessories, microfiber towels, waxes, sealants, ceramic coatings, mops, brushes, mitts, sponges, garage tools, applicators & other high-quality car cleaning products to the car care industry. If you are not satisfied, let us know & we’ll do everything we can to make it right!
- THICK & STICKY - Sticky Citrus Gel is a thick viscosity wheel cleaner that clings to wheels and rims, keeping the all-natural formula exactly where you need it fighting dirt and debris without rolling off!
- CLINGY FORMULA FOR MINIMAL SCRUBBING - Sticky Citrus clings to wheels and vertical surfaces, suspending road grime, brake dust, oil, and dirt and then lifting it off the wheel safely and gently.
- SAFE FOR ALL WHEEL TYPES - Formulated with all-natural citrus extracts, and without highly-caustic cleaners. Sticky Citrus Gel combines natural cleaners with oxygen generators to clean any wheel type safely and effectively, without any harm to you or the environment.
- EASY-TO-USE - Spray Sticky Citrus over filthy wheel parts, and watch as it sticks to the filthiest surfaces for a deeper clean using less product!
- THE GO TO BRAND IN CAR CARE - Beginners and professionals alike choose Chemical Guys, not only for the finest car care products, but the world class customer support and vast detailing knowledge Chemical Guys is more than a brand it's a lifestyle with a worldwide following
- ✅ CONCENTRATED: With dilution 4 to 1, just add 6 Oz. of Non Acid to a 32 Oz. spray bottle, or add 1 gallon of the product to a 5 gallon dispensing tank. It provides a thick rich foam that effectively & safely lifts brake dust, oil, Dirt, stains and light corrosion.
- ✅ EXTREME “CLING” FOAMING ACTION : Contains a blend of rich, thick alkaline-concentrated foaming cleaning agent to cling onto vertical surface, so you can be sure that wherever you apply it, it will provide an effective contamination removal.
- ✅ THOROUGH TIRE CLEAN: High alkaline & high sudsing power effectively removes silicones, greases, wax build-up, polymers, and any previously applied dressings to leave your tires thoroughly clean and make them look like new again.
- ✅ SAFE ON MANY FINISHES – Professional-grade wheel and tire cleaner that forgoes caustic acids and instead relies on smart chemistry. Safe on clear-coated, powder-coated, chrome, alloy, and factory painted wheels. Nanoskin Non Acid gets to work fast and dissolves stubborn metallic contamination.
- ✅ EASY TO USE & SAVE TIME: Stable foam allows for complete coverage and proper cling-time to vehicle surfaces, makes beginner and professional detailer friendly. Nanoskin Non Acid enables you to save time and maximize profits by relying on one wheel cleaner for most applications.
- Safely dissolves grease road grime and brake dust on contact
- Reveals your wheel's brilliant shine
- Safe for all wheels
- Fit type: Universal Fit
- FOAMING CLEANER FOR YOUR WHEELS & RIMS - Oxygen-infused cleaners and slick lubricants in Diablo Wheel Gel form a foaming lather to lubricate surfaces and gently guide dirt and grime off of your wheels for the gentlest and most thorough clean available!
- WASH AWAY HARMFUL BRAKE DUST & ROAD GRIME - Diablo Gel Wheel And Rim Cleaner lifts away stuck-on brake dust and grime with concentrated suspension technology! Tackle the toughest dirt and debris the road throws at your wheels with this advanced cleaner!
- PRESERVE YOUR SENSITIVE WHEEL & RIM FINISHES - Brake dust and road filth are not just ugly, they will destroy your wheels if left unchecked! Diablo wheel gel removes abrasive and corrosive particulates before they can damage your sensitive wheel finishes!
- SAFELY CLEAN ANY TYPE OF WHEEL WITHOUT SCRATCHING - Unlike other wheel cleaners, Diablo Wheel Gel uses no caustic acids or heavy alkaline compounds and won’t harm your shiny wheel finishes while your clean! The advanced foaming formula safely lifts dirt and grime to help prevent scratches and swirls!
- NON-CAUSTIC FORMULA WON’T HARM OTHER CAR PARTS - Diablo Wheel Gel is gentle, non-caustic, and safe to use around any other car part in the vicinity of the wheel! Simply rinse off any overspray without any fear of etching or staining any other cart parts!
Last update on 2024-03-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.