Safety Recall V31 / NHTSA 19V-248 Passenger Seat Fasteners – 2019 Jeep Cherokee

“This site contains affiliate links for which OEMDTC may be compensated”

March 28, 2019 NHTSA CAMPAIGN NUMBER: 19V248000

Passenger Seat Mounting Bolts may be Loose

In the event of a crash, the seat may move, increasing the risk of injury.

 

NHTSA Campaign Number: 19V248

Manufacturer Chrysler (FCA US LLC)

Components SEATS

Potential Number of Units Affected 253

 

Summary

Chrysler (FCA US LLC) is recalling certain 2019 Jeep Cherokee vehicles. The front passenger seat mounting bolts may be loose.

 

Remedy

Chrysler has notified owners, and dealers will tighten the mounting bolts, free of charge. The recall began April 11, 2019. Owners may contact FCA US customer service at 1-800-853-1403. Chrysler’s number for this recall is V31.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Vehicle has a Recall

 


April 2019

Dealer Service Instructions for:

Safety Recall V31 / NHTSA 19V-248 Passenger Seat Fasteners

 

Remedy Available

2019 (KL) Jeep Cherokee

 

NOTE:  This recall applies only to the above vehicles.

NOTE:  Some vehicles above may have been identified as not involved in this recall and therefore have been excluded from this recall.

IMPORTANT:  Some of the involved vehicles may be in dealer new vehicle inventory.  Federal law requires you to complete this recall service on these vehicles before retail delivery.  Dealers should also consider this requirement to apply to used vehicle inventory and should perform this recall on vehicles in for service.  Involved vehicles can be determined by using the VIP inquiry process.

 

Subject

The passenger front seat fasteners on about 250 of the above vehicles may not be fully tightened to the specified torque. An occupant may notice a loose or rattling passenger seat.  If the fastener is not tightened to the specified torque, it could increase the risk of passenger injury in an accident.

 

Repair

Inspect the front passenger seat mounting fasteners for correct torque and repair if needed.

 

Parts Information

Due to the small number of involved vehicles expected to require seat bolts, no parts will be distributed initially.  Seat bolts should be ordered only after inspection determines that seat bolts are required.  Very few vehicles are expected to require seat bolts.

Description Part Number
Bolt, Seat Mounting (one kit per repair) (MSQ of 4) 06511652AA

 

Parts Return

No parts return required for this campaign.

 

Special Tools

No special tools are required to perform this service procedure.

 

Service Procedure

 

NOTE: The bolts may be a Mortorq® bolt and require a Mortorq® tool bit for removal and installation. 

 

  1. Move the passenger front seat to the full rearward position.
  1. Using a torque wrench inspect the front passenger seat bolts for 39 N·m (29 ft. lbs.). Both bolts must achieve the     required torque without rotating (Figure 1).
  • If both bolts achieved 39 N·m (29 ft. lbs.) without rotating, return the vehicle to the customer.
  • If either bolt was not tightened to at least 39 N·m (29 ft. lbs.) continue to Step 3.

Figure 1 – Check Front Seat Bolt TorqueFigure 1 – Check Front Seat Bolt Torque

 

  1. Remove and DISCARD the two front seat bolts (Figure 1).
  1. Move the passenger front seat to the full forward position.
  1. Remove the rear inboard seat bolt cover (Figure 2).
  1. Remove and DISCARD the two rear seat bolts (Figure 2).

Figure 2 – Rear Seat Bolt LocationsFigure 2 – Rear Seat Bolt Locations

 

  1. Hand start four NEW seat bolts.
  1. Move the passenger front seat to the full rearward position.
  1. Tighten the front seat bolts to 39 N·m (29 ft. lbs.) in the following sequence.

a. Front inboard (Figure 1).

b. Front outboard (Figure 1).

  1. Move the passenger front seat to the full forward position.
  1. Tighten the rear seat bolts to 39 N·m (29 ft. lbs.) in the following sequence.

a. Rear inboard (Figure 2).

b. Rear outboard (Figure 2).

  1. Install the rear inboard seat bolt cover.
  1. Move the passenger seat to its original position.
  1. Return the vehicle to the customer.


1 Affected Product

Vehicle

MAKE MODEL YEAR
JEEP CHEROKEE 2019

 


9 Associated Documents

ISSUED Owner Notification Letter(Part 577)

RCONL-19V248-7629.pdf 518.674KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [506.52 KB]

 


Manufacturer Notices(to Dealers,etc) – 04/04/2019 New Safety Recall Advanced Communication – V31

RCMN-19V248-0409.pdf 101.51KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [99.13 KB]

 


Remedy Instructions and TSB

RCRIT-19V248-6549.pdf 923.537KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [901.89 KB]

 


Defect Notice 573 Report

RCLRPT-19V248-3650.PDF 213.892KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.88 KB]

 


Recall Acknowledgement

RCAK-19V248-2107.pdf 244.946KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.21 KB]

 


Recall Quarterly Report #2, 2019-3

RCLQRT-19V248-2580.PDF 211.238KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.29 KB]

 


Recall Quarterly Report #1, 2019-2

RCLQRT-19V248-9489.PDF 211.142KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.19 KB]

 


Recall Quarterly Report #3, 2019-4

RCLQRT-19V248-1778.PDF 211.324KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.37 KB]

 


ISSUED Renotification Notice

RCRN-19V248-1456.pdf 137.161KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [133.95 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V248&docType=RCL

 


 

SaleBestseller No. 1
LEXIVON 3/8-Inch Drive Click Torque Wrench 10~80 Ft-Lb/13.6~108.5 Nm (LX-182)
  • PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
  • DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
  • LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
  • PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
  • COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
SaleBestseller No. 2
EPAuto 1/2-inch Drive Click Torque Wrench, 10-150 ft/lb, 13.6-203.5 N/m
  • Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
  • Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
  • Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
  • Accessories included: 1/2" Drive 5" long Extension Bar and 1/2" Drive to 3/8" Drive Reducer
  • Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
Bestseller No. 3
SUERCUP 3/8-Inch Drive Click Torque Wrench - 5-45 Ft-Lb/6.8-61Nm, ±3% High Accuracy Torque Wrench, Dual-Direction Adjustable 72 Tooth Click Torque Wrench for Bike, Motorcycle and Car Repair
  • 【High Precision&Quick Reading】: 3/8 torque wrench has high contrast and dual range scale( 5-45 Ft-Lb/6.8-61 Nm),making it clear and easy to read. We have professional torque wrench production technology, and after 20000 tests, the calibration error range of the torque wrench is ± 3%, making it an essential helper for you.
  • 【Safe and Reliable Operation】: Equipped with a bidirectional drive ratchet head, torque can be measured clockwise or counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque.
  • 【High Quality and Durable Material】: Made of hardened chromium vanadium steel alloy (Cr-V). At the same time, the bottom buckle tail plug adopts a red anodizing process to improve the product's oxidation resistance during use and enhance surface wear resistance. 72 tooth ratchet head, made of chromium molybdenum steel. High quality materials resist corrosion and are durable.
  • 【Quick Torque Setting】: Simple and fast torque setting, pull down the locking knob and hold it down to rotate to the torque you need. Release the hand and the locking knob will automatically rebound to lock the torque value. And the designer referred to the appearance of the flashlight handle and designed a non slip and labor-saving knurled handle, making it more comfortable and easy to hold when using.
  • 【Easy to Store and Widely Use】: You will receive the 3/8-inch drive click torque wrench with a sturdy plastic shell storage box, which is very delicate and durable. Torque wrench is suitable nuts and bolts on various occasions, such as bike, motorcycle, car spark, and is the best helper for you🎁. 🔔 And we provide 12 months warranty. If you have any questions, please feel free to contact us.
Bestseller No. 4
VANPO 1/4 & 3/8 & 1/2-inch Drive Click Torque Wrench, 3Pcs Torque Wrench Set 20-240in.lb, 5-45ft.lb, 20-160ft.lb, Dual-Direction Adjustable 72-Tooth Torque Wrench for Bike, Moto, Car Maintenance
  • 【3Pcs Torque Wrench Set】 The calibration error range is ±3%, each torque wrench has a calibration certificate. The 3-in-1 torque wrench set can meet your different needs. Including 1/4 inch 20-240in.lb, 3/8 inch 5-45ft.lb, 1/2 inch 20-160ft.lb.
  • 【Safe & Reliable】 When the 1/2 torque wrench reaches the preset torque value, it makes a clear "click" sound, accompanied by an obvious hand vibration that reminds you no longer to apply force, prevent damage caused. 72-tooth reversible ratchet head, it can be used both clockwise and counterclockwise directions.
  • 【Quick Release Button】 This 3/8 torque wrench has a quick release button with which accessories can easily be installed and removed, the accessories can grip and is not easy to fall down. It is more convenient to use. The torque wrench is made of CR-MO with a higher hardness.
  • 【Easy to Set】First pull down the locking knob and hold it down and then start setting the desired torque value. Release the hand and the locking knob will automatically rebound to lock the torque value. If you do not use, please set the torque key to the minimal torque value.
  • 【Widely Use】The torque wrenches can satisfy you in bicycle, motorcycle, car, truck and wheel screws, wheel nuts and in the device installation, electrical engineering, etc. We provide 12 months warranty. If you have any questions, please feel free to contact us.
Bestseller No. 5
Amazon Basics 3/8-Inch Drive Click Torque Wrench - 15-80 ft.-lb, 20.4-108.5 Nm
  • 3/8 inch drive torque wrench with 15-80 ft.-lb./20.4-108.5 Nm range; reminder: to prevent the ratchet from breaking, please do not overload the torque wrench
  • Durable ratchet head made from hardened treated Chrome Vanadium steel alloy (Cr-V); bright, full polish chrome finish wipes easily clean and resists rust and corrosion
  • High contrast and dual range scale pre-calibrated to ± 4%; tips: for precise scale adjustment, please use the imperial scale; the conversion formula between imperial scale and metric scale is 1 Nm = 8.86 in-lbs
  • Includes sturdy plastic case for storage and portability
  • NOTE: unlock before adjusting the torque value, lock after adjusting for stability of working torque; when finished, loosen locking ring and adjust to the lowest value for next use
Bestseller No. 6
Tapha Tools 3/8 inch Digital Torque Wrench 3.1-62.7 ft-lbs (4.2-85 N-m) Torque Range, Accurate to ±2% Dual Direction, LED and Buzzer Notification, Preset Memory, ISO 6789, Calibrated (WP3N-T085BN)
  • Precision Torque Measurement from 3.1 to 62.7 ft. pounds (4.2 - 85 N-m / 37 - 752 in-lb / 43 - 867 kg-cm) with ±2% accuracy and 0.1 ft-lb (0.1 N-m / 1 in-lb / 1 kg-cm) resolution. Buzzer and LED Notification when target torque is reached.
  • Large 1.5-inch LCD display provides Real-Time torque measurements in kg-cm, N-m, in-lb. ft-lb. Switch between Peak-Hold and Tracking modes. Store up to 9 Pre-set Torque Targets in the Wrench.
  • Ergonomically designed, Multi-Purpose Digital Torque Target Toque perfect for control and apply measured torque in industrial, HVAC, automotive and aerospace applications.
  • Meets or exceeds ASME B107. 14-2004, ISO 6789 standards - Individually Calibrated Certificate of Calibration. Uses 2x AAA Batteries (INCLUDED)
  • Constructed from high quality stainless steel and industrial plastic. This electric torque wrench comes with a protective case that shield against wear & tear to deliver long lasting performance.
Bestseller No. 7
Hairich 1/2 Inch Drive Click Torque Wrench, Dual-direction Torque Wrench 10-170.0ft.lb/13.60-230.5Nm, 72-tooth Torque Wrenches with Dual Range Scales, ±3% High Precision Torque Wrench For Bike
  • ±3% HIGH PRECISION AND COOL APPEARANCE: 1/2 inch drive torque wrench (10-170ft.-lb/13.6-230.5Nm)has a calibration error range of ±3%, high precision, and comes with a corresponding serial number, which is easy to trace the original data, and you can use it with confidence.Hairich torque wrench not only has superior quality but also has a superior appearance. The classic combination of black and red is fashionable and textured, allowing you to enjoy a visual feast during use.
  • PREMIUM MATERIAL AND DURABLE: Experience the ultimate durability and antiskid with the torque wrench. The main body of Hairich torque wrench set is made of chrome vanadium steel alloy, which is more strong and more durable. The head of the inch-pound torque wrench adopts a ratchet design with a reversing device to improve work efficiency. The square knurled handle is made of aluminum titanium alloy, which is ergonomic and comfortable to hold for long-time use.
  • DUAL SCALE AND QUICK SETTING: Laser Printed by dual-range(ft-lb and Nm). Our professional torque wrench is easy to read and provides direct unit conversion, When the set torque value is reached, the torque wrench will make an audible and felt click to remind you to stop applying force. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value.
  • ERGONOMIC DESIGN AND POWERFUL: Every design of our industrial torque wrench conforms to ergonomic, easy to handle.72-tooth ratchet, 5° ratcheting arc head, a quick-release button for easy loading and unloading, and an aluminum non-slip handle for excellent grip and control. A recent research review that, 72-tooth ratchets are very professional tooth ratchets, you just only rotate 5 degrees to finish it. Not easy to slip and wear, can be used in small spaces, and is more durable and powerful.
  • EASY OPERATION AND SAFETY: Thanks to its bidirectional drive ratchet head, our torque wrench can be measured both clockwise and counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque. Notice: At low Nm settings under 5 Nm the "click" sound can be too light to hear.
Bestseller No. 8
etoolab 1/2 Drive Click Torque Wrench Dual-Range【10-170.0ft.lb/10-227Nm】±3% Precision Torque Wrench 1/2 Drive, 72 Tooth Dual-Direction Adjustable Torque Wrench for Bicycle, Moto and Car Maintenance
  • 🔧【𝐌𝐢𝐥𝐢𝐭𝐚𝐫𝐲-𝐠𝐫𝐚𝐝𝐞 𝐒𝐭𝐞𝐞𝐥】ETOOLAB torque wrench utilizes military-grade steel as its base material, coupled with professional surface rust protection methods tailored to usage habits. While ensuring user comfort, it enhances product strength, wear resistance, and rust resistance. offers a more comfortable experience and a longer lifespan!
  • 👍【𝐄𝐚𝐬𝐲-𝐭𝐨-𝐑𝐞𝐚𝐝】The scale of this 1/2 drive torque wrench is laser-engraved, using a black background with white markings. dinamometrica de 1/2 ensures clear and easy readability of the scale, even in sunlight. With a dual-scale design, users can conveniently read torque values in two different units according to their preferences, without the need for conversion!
  • ⚙️【±𝟑% 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 & 𝐒𝐢𝐦𝐩𝐥𝐞 𝐋𝐨𝐜𝐤𝐢𝐧𝐠 𝐑𝐢𝐧𝐠】Our torque wrench 1/2 drive meets the high precision standard of ±3% and comes with a traceable serial certificate. You can use it with confidence! Moreover, its graduation ring is tightly locked, with smaller incremental values, ensuring precise and consistent torque output even after multiple uses. This reduces the hassle of frequent adjustments. It is undoubtedly an excellent tool for your work!
  • 🔊【𝐋𝐨𝐮𝐝 𝐂𝐥𝐢𝐜𝐤 𝐒𝐨𝐮𝐧𝐝】This torque wrenches has been upgraded to have a louder "Click" sound. We conducted over 25,000 tests to ensure that each product produces a click sound volume of no less than 45dB when the torque value exceeds 34 lbf·ft. When you hear the distinct click sound, it indicates that the preset torque has been reached, signaling you to stop applying force. You no longer need to worry about damaging your mechanical components.
  • 💯【𝐔𝐬𝐞𝐫-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲】Our torque wrench set features a 72-tooth dual-directional ratchet head, allowing for easy operation in both clockwise and counterclockwise directions. It is designed with an adjustable locking ring, making it effortless to adjust the preset torque value. Additionally, it includes a quick-release head design, allowing it to replace the wrench head accessories more easily!
Bestseller No. 9
TEKTON 3/8 Inch Drive Micrometer Torque Wrench (10-80 ft.-lb.) | 24330
  • Includes 1-pc. 3/8 in. drive torque wrench; Storage case; Product manual with torque conversion chart
  • Wrench emits a click that can be heard and felt when the preset value is reached
  • Permanently marked, high-contrast dual-range scale is easy to read, even in low light
  • Reversible ratchet head drives in both directions and measures torque in clockwise direction
  • Durable all-steel construction has no plastic parts to break or wear out
Bestseller No. 10
GEARWRENCH 3/8 Drive Electronic Torque Wrench 7.4-99.6 FT LB - 85076
  • 72-tooth ratchet provides 5° swing arc allows you to turn fasteners in tight spaces
  • “Target Torque Alert” gives a warning as you approach the target torque; vibrating handle, buzzer, and solid LED light indicate when target is reached
  • 5 torque measurement units [ft-lbs, in-lbs, Nm, kg-m, kg-cm]

Last update on 2024-03-25 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...