Safety Recall V83 / NHTSA 19V-556 Instrument Panel Cluster – 2019 Ram 1500

“This site contains affiliate links for which OEMDTC may be compensated”

July 26, 2019 NHTSA CAMPAIGN NUMBER: 19V556000

Driver Warnings May Not Illuminate/FMVSS 101

Failure of the instrument cluster to properly illuminate may prevent the driver from receiving warnings about the vehicle’s systems and increase the risk of crash.

 

NHTSA Campaign Number: 19V556

Manufacturer Chrysler (FCA US LLC)

Components ELECTRICAL SYSTEM

Potential Number of Units Affected 1

 

Summary

Chrysler (FCA US LLC) is recalling one 2019 Ram 1500 vehicle. The instrument cluster may not properly illuminate driver warnings. As such, this vehicle fails to conform with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, “Control and Displays.”

 

Remedy

Chrysler will notify owners, and dealers will replace the instrument cluster, free of charge. The recall began August 8, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler’s number for this recall is V83.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Vehicle has a Recall

 


Revised January 2020

Dealer Service Instructions for:

Safety Recall V83 / NHTSA 19V-556 Instrument Panel Cluster

NOTE: New information in repair section

Remedy Available

2018 – 2019 (DS) RAM 1500 Pickup
(DX) RAM Truck (Mexico)

 

NOTE:  Some vehicles above may have been identified as not involved in this recall and therefore have been excluded from this recall.

 

IMPORTANT:  Some of the involved vehicles may be in dealer new vehicle inventory.  Federal law requires you to complete this recall service on these vehicles before retail delivery.  Dealers should also consider this requirement to apply to used vehicle inventory and should perform this recall on vehicles in for service.  Involved vehicles can be determined by using the VIP inquiry process.

 

Subject

The instrument panel cluster on 1 of the above vehicles may become nonoperational. A non-operational instrument cluster will be unable to provide information such as warning chimes, messages, and gauges.  The loss of a functional instrument cluster may prevent the activation of warning chimes, messages, and gauges to provide vehicle information to the driver, which may increase the risk of a crash without warning.

 

Repair

Reprogram the Instrument Cluster on all of the above vehicles involved.

 

Parts Information

NOTE: Clusters can only be ordered through campaignteam@fcagroup.com. Please provide the VIN, Mileage, and Dealer Code. The Supply Chain team will order the cluster from the supplier.  These parts will be shipped SSD.

 

Parts Return

No parts return required for this campaign.

 

Special Tools

The following special tool is required to perform this repair:

  • NPN
wiTECH micro pod II
  • NPN
Laptop Computer
  • NPN
wiTECH Software

 

Service Procedure

 

NOTE: The wiTECH scan tool must be used to perform this Safety Recall.  The wiTECH software is required to be at the latest release level before performing this procedure.  If the reprogramming flash is aborted or interrupted, repeat the procedure. 

 

  1. Open the hood. Install a battery charger and verify that the charging rate provides 13.0 to 13.5 volts.  Do not allow the charger to time out during the flash process.  Set the battery charger timer (if so equipped) to continuous charge.                                               

NOTE:  Use an accurate stand-alone voltmeter.  The battery charger volt meter may not be sufficiently accurate.  Voltages outside of the specified range will cause an unsuccessful flash.  If voltage reading is too high, apply an electrical load by activating the park or headlamps and/or HVAC blower motor to lower the voltage.

 

  1. Connect the wiTECH micro pod II to the vehicle data link connector.

 

  1. Place the ignition in the “RUN” position.

 

  1. Open the wiTECH 2.0 website.

 

  1. Enter your “User id” and “Password” and your “Dealer Code”, then select “Sign In” at the bottom of the screen. Click “Accept”.

 

  1. From the “Vehicle Selection” screen, select the vehicle to be updated.

 

  1. From the “Topology” tab, select the “IPC” icon.

 

  1. From the “Flash” tab, compare the “Current Electronic Control Unit (ECU) Part Number” with the “New ECU Part Number” listed.
    • If the “Current ECU part Number” is the same as the “New Part Number”, proceed to Step 11.
    • If the “Current ECU part Number” is NOT the same as the “New Part Number”, continue with Step 9.

 

  1. From the flash ECU agreement page, agree to terms by checking the box.

 

  1. Select “Flash ECU” and then follow the wiTECH screen instructions to complete the flash.

 

 

  1. From the “Topology” screen, select the “All DTCs” tab to view the DTCs.

 

  1. Select “Clear All DTCs” and then select “Close”.
  2. Place the ignition in the “OFF” position and then remove the wiTECH micro pod II device from the vehicle.

 

  1. Remove the battery charger from the vehicle.

 

  1. Close the vehicle hood and return the vehicle to the customer.

 

Completion Reporting and Reimbursement

Claims for vehicles that have been serviced must be submitted on the DealerCONNECT Claim Entry Screen located on the Service tab.   Claims paid will be used by FCA to record recall service completions and provide dealer payments.

Use the following labor operation number and time allowance:

Labor Operation
Number
Time
Allowance
Replace Instrument Panel Cluster 08-V8-31-83 0.4 hours

 

NOTE:  See the Warranty Administration Manual, Recall Claim Processing Section, for complete recall claim processing instructions.

 

Dealer Notification

To view this notification on DealerCONNECT, select “Global Recall System” on the Service tab, then click on the description of this notification.

 

Owner Notification and Service Scheduling

All involved vehicle owners known to FCA are being notified of the service requirement by first class mail.  They are requested to schedule appointments for this service with their dealers.  A generic copy of the owner letter is attached.

 

Vehicle Lists, Global Recall System, VIP and Dealer Follow Up

All involved vehicles have been entered into the DealerCONNECT Global Recall System (GRS) and Vehicle Information Plus (VIP) for dealer inquiry as needed.

GRS provides involved dealers with an updated VIN list of their incomplete vehicles.  The owner’s name, address and phone number are listed if known. Completed vehicles are removed from GRS within several days of repair claim submission.

To use this system, click on the “Service”  tab and then click on “Global Recall System.”  Your dealer’s VIN list for each recall displayed can be sorted by: those vehicles that were unsold at recall launch, those with a phone number, city, zip code, or VIN sequence.

Dealers must perform this repair on all unsold vehicles before retail delivery. Dealers should also use the VIN list to follow up with all owners to schedule appointments for this repair.

Recall VIN lists may contain confidential, restricted owner name and address information that was obtained from the Department of Motor Vehicles of various states.  Use of this information is permitted for this recall only and is strictly prohibited from all other use.

 

Additional Information

If you have any questions or need assistance in completing this action, please contact your Service and Parts District Manager.

Customer Services / Field Operations
FCA US LLC


This notice applies to your vehicle,

[Model Year and Model]

VIN XXXXXXXXXXXXXXXXX V83/NHTSA 19V-556

 

LOGO

VEHICLE PICTURE

YOUR SCHEDULING OPTIONS

 

  1. RECOMMENDED OPTION Call your authorized Chrysler / Dodge / Jeep® / RAM Dealership 
  1. Call the FCA Recall Assistance Center at 1-800-853-1403. An agent can confirm part availability and help schedule an appointment 
  1. Visit mopar.com, scan the QR code below, or download the Mopar Owner’s Companion App.

 

QR Code

 

Get access to recall notifications, locate your nearest dealer, and more through this website or Mopar Owner’s Companion App. You will be asked to provide your Vehicle Identification Number (VIN) to protect and verify your identity. The last eight characters of your VIN are provided above.

 

DEALERSHIP INSTRUCTIONS

Please reference Safety Recall V83.


IMPORTANT SAFETY RECALL

Instrument Panel Cluster

 

Dear [Name],

This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. 

FCA has decided that certain [2018 – 2019 (DS) 1500 RAM Pickup] vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 101 S5.3 which requires vehicles to illuminate telltales and their identification sufficiently to make them visible to the driver under daylight and nighttime driving conditions. Under certain conditions, vehicles built with the affected instrument clusters may not illuminate the required telltales. It is extremely important to take steps now to repair your vehicle to ensure the safety of you and your passengers.

 

WHY DOES MY VEHICLE NEED REPAIRS?

The instrument cluster on your truck [1] may, under certain circumstances, become nonoperational. This condition may result in the lack of activation of warning chimes, messages, and gauges.  Failure to illuminate telltales as appropriate may prevent the operator from receiving information regarding the status of the vehicle systems, and can cause a vehicle crash without warning.

 

HOW DO I RESOLVE THIS IMPORTANT SAFETY ISSUE?

FCA US will repair your vehicle [2] free of charge (parts and labor).  To do this, your dealer will replace your instrument cluster. The estimated repair time is about an hour. In addition, your dealer will require your vehicle for proper check-in, preparation, and check-out during your visit, which may require more time. Your time is important to us, so we recommend that you schedule a service appointment to minimize your inconvenience. Please bring this letter with you to your dealership.

 

TO SCHEDULE YOUR FREE REPAIR,
CALL YOUR CHRYSLER, DODGE, JEEP OR RAM DEALER TODAY

 

WHAT IF I ALREADY PAID TO HAVE THIS REPAIR COMPLETED?

If you have already experienced this specific condition and have paid to have it repaired, you may visit www.fcarecallreimbursement.com to submit your reimbursement request online. [3] Once we receive and verify the required documents, reimbursement will be sent to you within 60 days.  If you have had previous repairs performed and/or already received reimbursement, you may still need to have the recall repair performed.

 

We apologize for any inconvenience, but are sincerely concerned about your safety.  Thank you for your attention to this important matter.

Customer Assistance/Field Operations

FCA US LLC


Mr. Mrs. Customer
1234 Main Street
Hometown, MI 48371

[1] If you no longer own this vehicle, please help us update our records. Call the FCA Recall Assistance Center at 1-800-853-1403 to update your information.

[2] If your dealer fails or is unable to remedy this defect without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC  20590, or you can call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-4249153), or go to safercar.gov.

[3] You can also mail in your original receipts and proof of payment to the following address for reimbursement consideration: FCA Customer Assistance, P.O. Box 21-8004, Auburn Hills, MI 48321-8007, Attention: Recall Reimbursement.

 

Note to lessors receiving this recall notice: Federal regulation requires that you forward this recall notice to the lessee within 10 days.


Service Procedure

Replace Instrument Panel Cluster

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable

Figure 1 – Lower Shroud ScrewsFigure 1 – Lower Shroud Screws                       

 

NOTE: There are snap connections near the instrument cluster and between the shroud and the steering wheel that secure the upper and lower shroud.

 

  1. Remove the upper shroud by pushing gently inward and upward on both sides of the upper shroud above the parting line of the lower shroud to release the snap features that secure the two shroud halves to each other.
  1. Remove the fasteners that secure the top of the instrument cluster bezel to the instrument panel (Figure 2).

Figure 2 – Bezel FastenersFigure 2 – Bezel Fasteners

 

  1. Using a trim stick C4755 or equivalent, disengage the retainer clips that secure the instrument cluster bezel to the instrument panel and remove the bezel (Figure 3).

Figure 3 – Instrument Cluster BezelFigure 3 – Instrument Cluster Bezel

 

  1. Remove the two screws that secure the instrument cluster to the instrument panel (Figure 4).

Figure 4 – Cluster ScrewsFigure 4 – Cluster Screws

 

  1. Pull the instrument cluster away far enough to access and disconnect the instrument panel wire harness connector from the connector receptacles on the back of the cluster housing (Figure 5).

Figure 5 – Electrical ConnectorFigure 5 – Electrical Connector

 

  1. Remove the instrument cluster from the instrument panel.
  1. Position the NEW instrument cluster close enough to the instrument panel to connect the instrument panel wire harness connector to the connector receptacles on the back of the cluster housing (Figure 5).
  1. Position the instrument cluster into the instrument panel (Figure 4).
  1. Install and tighten the two screws that secure the instrument cluster to the instrument panel. Tighten the screws to 4 N·m (31 in. lbs.) (Figure 4).
  1. Position the upper shroud onto the steering column over the lower shroud.
  1. Align the snaps features on the upper and lower shroud halves and apply hand pressure to snap together.
  1. From below the steering column, install the two outboard screws within the recess areas that secure the upper shroud to the lower shroud (Figure 1).
  1. Install the instrument cluster bezel onto the instrument panel and fully engage the retainer clips to the instrument panel.
  1. Install the fasteners that secure the instrument cluster bezel to the instrument panel (Figure 2).
  1. Connect the negative battery cable and tighten to 7 N·m (62in. lbs.). If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.

 

NOTE: Certain indicators in this instrument cluster are automatically configured. The instrument cluster should automatically relearn the equipment in the vehicle and properly configure the configurable indicators accordingly. In the event of any relearn issue, disconnect the negative battery cable and reconnect the negative cable, then turn the ignition switch to the ON position. The instrument cluster should automatically relearn the equipment in the vehicle and properly configure the configurable indicators accordingly

 

  1. Close the hood and return the vehicle to the customer.

 


12/18/2019

New Safety Recall Advanced Communication – V83

FCA US LLC (FCA US) has announced a safety recall on a certain 2019 Model Year (DS) RAM 1500 Pickup vehicle.  

VINs identified as being involved in this campaign are currently live and searchable. Stop sale is in effect for the above-identified vehicles.

Vehicles impacted by a stop sale are eligible for reimbursement allowance through the Recall Floorplan Reimbursement Policy (RFPRP), which can be requested upon recall claim submission.

 

IMPORTANT:  Some of the involved vehicles may be in dealer new vehicle inventory.  Federal law requires you to complete this recall service on these vehicles before retail delivery.  Violation of this requirement by a dealer could result in a civil penalty of up to $21,000 per vehicle.  Involved vehicles can be determined by using the VIP inquiry process.

 

REASON FOR THIS SAFETY RECALL

The above vehicle may have been built with an instrument cluster which may, under certain circumstances, become non-operational. This condition may result in the lack of activation of warning chimes, messages, and gauges.  Failure to illuminate telltales as appropriate may prevent the operator from receiving information regarding the status of the vehicle systems, and can cause a vehicle crash without warning.

The condition described does not comply with Federal Motor Vehicle Safety Standard (FMVSS) No.101 S5.3, which requires vehicles to illuminate telltales and their identification sufficiently to make them visible to the driver under daylight and nighttime driving conditions.

 

SERVICE ACTION

FCA US will conduct a voluntary safety recall to replace or update the software in the instrument panel cluster.  Dealers will be notified of the launch of this safety recall by way of established communication methods.  This recall is estimated to launch in January, 2020.

 

We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries regarding involved vehicles.

 

Customer Services Field Operations

FCA US LLC

 


07/26/2019

New Safety Recall Advanced Communication – V83

FCA US LLC (FCA US) has announced a safety recall on a certain 2019 Model Year (DS) RAM 1500 Pickup vehicle.  

 

REASON FOR THIS SAFETY RECALL

The above vehicle may have been built with an instrument cluster which may, under certain circumstances, become non-operational. This condition may result in the lack of activation of warning chimes, messages, and gauges.  Failure to illuminate telltales as appropriate may prevent the operator from receiving information regarding the status of the vehicle systems, and can cause a vehicle crash without warning.

The condition described does not comply with Federal Motor Vehicle Safety Standard (FMVSS) No.101 S5.3, which requires vehicles to illuminate telltales and their identification sufficiently to make them visible to the driver under daylight and nighttime driving conditions.

 

SERVICE ACTION

FCA US will conduct a voluntary safety recall to replace the instrument panel cluster.  Dealers will be notified of the launch of this safety recall by way of established communication methods.  This recall is estimated to launch in 3rd Quarter of 2019.

 

We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries regarding involved vehicles.

 

Customer Services Field Operations

FCA US LLC

 


1 Affected Product

Vehicle

MAKE MODEL YEAR
RAM 1500 2019

 


13 Associated Documents

Remedy Instructions and TSB

RCRIT-19V556-3149.pdf 1263.426KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.20 MB]

 


Recall Acknowledgement

RCAK-19V556-6783.pdf 243.931KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [238.21 KB]

 


Non-Compliance Notice 573 Report

RCLRPT-19V556-5804.PDF 214.046KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.03 KB]

 


Manufacturer Notices(to Dealers,etc) – 07/26/2019 New Safety Recall Advanced Communication – V83

RCMN-19V556-3133.pdf 98.987KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [96.67 KB]

 


Recall Quarterly Report #2, 2019-4

RCLQRT-19V556-5224.PDF 211.242KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.29 KB]

 


Recall Quarterly Report #3, 2020-1

RCLQRT-19V556-8117.PDF 211.335KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.38 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19V556-3635.pdf 516.978KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [504.86 KB]

 


Remedy Instructions and TSB

RCRIT-19V556-5048.pdf 780.267KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [761.98 KB]

 


Recall 573 Report-Amendment 2

RCLRPT-19V556-9561.PDF 214.121KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.10 KB]

 


Manufacturer Notices(to Dealers,etc) – 12/18/2019 New Safety Recall Advanced Communication – V83

RCMN-19V556-8815.pdf 101.508KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [99.13 KB]

 


Recall Quarterly Report #1, 2019-3

RCLQRT-19V556-4488.PDF 211.138KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.19 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19V556-5836.pdf 515.572KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [503.49 KB]

 


Recall Quarterly Report #4, 2020-2

RCLQRT-19V556-9757.PDF 211.442KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.49 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V556&docType=RCL

 


 

SaleBestseller No. 1
GOOACC 5 PCS Nylon Auto Trim Removal Tool Kit No-Scratch Removal Tool Kit for Car Panel & Audio Dashboard Dismantle Red
  • Premium Grade Nylon: Made of impacted resistant nylon fiber material with high level craftsmanship, it’s non-toxic, durable and not like brittle material which is prone to bent or crack
  • Multi-function tools:These 5 PCS different kinds of trim tools used for car audio/radio system installing or removing, dash panel, moldings, emblems, window trims or automotive interior repairing and furniture restoration
  • Good Helper: Whenever you need them, they are always here to help you. It would be an excellent choice to work with this kit
  • Ergonomic Design: GOOACC trim removal tool kit is made in accordance with ergonomics design with super lightweight and easy handheld features which effectively effort saving for various interior and exterior car trimming
  • Package Include:Including 4 pcs car dash panel removal tool and 1 fastener remover, total 5 pcs auto trim removal tool
SaleBestseller No. 2
Tresalto Auto Trim Removal Tool Kit (No Scratch Plastic Pry Kit) , Door Panel Removal Tool, Car Clips, Push Rivets, Molding, Dashboards, Interior Trim Tools, Blue
  • SLEEK & DURABLE TRIM TOOL SET - Our premium grade auto trim removal tool set fits in any crevices and works excellent in removing exterior & interior trim, molding, wheel hubs, door panel removal tool, plastic pry tool, fasteners, dashboards, and more without scratching or damaging your car.
  • UNIVERSAL AUTO TRIM REMOVAL TOOL KIT - It includes 5 job-specific auto trim removal tools to make internal and external automotive removals easy. It is designed with care to be universally applicable to vehicles, boats, RVs, and more so you can make repairs and maintenance with ease while also protecting the aesthetic of your car with its sleek design.
  • UNIQUE ERGONOMIC DESIGN - This is made of sturdy and pliable nylon material with a unique ergonomic design that enables the tools to be easily handled to effectively save effort and time while working on laborious repair or maintenance tasks.
  • EASY & CONVENIENT - Perfect for professionals and beginners doing any care modifications. It's also compact in size which makes it easy and convenient to carry or stash in your car so you can use it anytime, anywhere.
Bestseller No. 3
XBRN Auto Trim Removal Tool Kit,13 Pcs Car Panel Door Window Tools Kit,Auto Clip Fastener Remover Pry Tool Set Blue
  • 5 Pack Trim Tools Kit : There are 5 pcs different kinds of trim tools, including 4 pcs car door panel removal tool and 1 pcs fastener remover .
  • Multifunctional Use : These Car Trim Remoaval Tools work great for car audio/radio system installing or removing, door panel, moldings, emblems, window trims or automotive interior repairing and furniture restoration
  • Trim Removal Tools :Auto interior trim removal tool is easy to hold in hand and access to some hard-to-reach spaces and crevices. It is a great car repair tool for professionals and beginners doing any car modifications.
  • PRY TOOL SET : This pry tool set made of super durable plastic material for long-time usage. Ergonomic design with super lightweight, easy handheld features which effectively effort saving for various interior and exterior car trimming in the shortest time.
  • Total 13 Pack : You will get 5 Pcs Trim Tools and 8 Pcs Tire Caps Valve;Easy to install or remove the car accessories without breaking. The sharp and clean edge of the trim tool ensures the good effect of using and curved and ultra thin clip head can reach the confined areas without pry off the trim.
SaleBestseller No. 4
GOOACC 238Pcs Trim Removal Tool, Auto Push Pin Bumper Retainer Clip Set Fastener Terminal Remover Tool Adhesive Cable Clips Pry Kit Car Panel Radio Removal Auto Clip Pliers (GRC-207)
  • 12 Most Popular Sizes : There are 12 most common sizes of clips which will meet your needs, sturdy and reusable, compatible for GM, Chrysler, Ford, Toyota, Nissan, Mazda. Hyundai, Kia, AMC, Jeep, etc…
  • Multifunctional: Different kinds of door panel removal tools are available for you, excellent for Automotive, Marine, Furniture or Aircraft Trim removal and installation, including Door Panels, Moldings, Window Trims, Clips, Fasteners, Emblems, Panels, Radios, etc...
  • Upgraded Material: Made of impacted resistant nylon fiber material with high-level craftsmanship, it’s non-toxic and durable, would be an excellent choice for you
  • Easy Storage: Come with a portable bag helps you carry all kits and is less prone to loosing, would greatly save your time and space
  • Package Include: 238Pcs Trim Removal Tool
Bestseller No. 5
AXELECT 5 Pack Trim Removal Tool Kit, No Scratch Plastic Pry Tool Kit,Auto Trim Tool Kit Car Tools,Car Panel Door Window Tools Kit,Fastener Removal Interior Trim Tools
  • TRIM REMOVAL TOOL : Package Included: 4pcs different auto trim removal kit + 1 piece fastener remover to facilitate your needs when repairing.
  • PLASTIC PRY TOOL : The car panel removal tools kit made of impacted resistant nylon fiber material. Strong enough that won't break or chip.
  • DOOR TRIM REMOVAL TOOL : The molding kit is designed for Cars, Boats, Bikes trimming jobs with 4pcs different trim tool kits in variety of shapes and sizes and one fastener removal tool.
  • CAR TRIM REMOVAL TOOL : The car repair tool kit is ergonomic design with super lightweight and handy size which effectively effort saving for various interior and exterior car trimming in a short time.
  • CAR PRY TOOL : The dash removal tool kits is perfect for most interior and exterior car modification which is hard enough to install or remove car audio system, dashboard, door grab handle, vent and other accessories.
Bestseller No. 6
YSPAMER 3Pcs Auto Fastener Remover Trim Rivet Removal Tool Kit for Car Door Panel Dashboard
  • WHAT YOU GET: Package contents 3Pcs Auto Fastener Remover Tool which the length is 20cm/7.9''(3.95” shaft + 3.95” handle), 22.5cm/8.9‘'(5.15” shaft + 3.75” handle), 31.5cm/12.4''(8.25” shaft plus 4.15” handle), meet your various size needs.
  • DURABLE MATERIAL: Made of red plastic handle and black steel finish removal bar, durable and corrosion resistant for a long service life.
  • WIDELY APPLICATION: Suitable for car audio-radio system installing or removing, door panel, moldings, emblems, window trims and automotive interior repairing without damaging upholstery or the trim.
  • EASY to USE: Easily slide into confined areas, suitable for many types of round and square clips, fasteners and plastic rivets, it is a great car repair tool for professionals and beginners doing any car modifications.
  • COMMON: Contain the mainly size of fastener remover for exact replacement of old and broken retainer.
SaleBestseller No. 7
19Pcs Trim Removal Tool,Car Panel Door Audio Trim Removal Tool Kit, Auto Clip Pliers Fastener Remover Pry Tool Set with Storage Bag
  • 19 Pcs Trim removal tools kits, works great for car audio/radio system installing or removing, door panel, moldings, emblems, window trims or automotive interior repairing and furniture restoration.
  • High Quality -Made of toughened nylon fiber,has the strength to pry up panels and pop open panel retaining pins lossless car modification.
  • Ergonomic Design-Easy to hold in hand fits hard to reach spaces and crevices. Save time, frustration and money
  • Easy for Storage-Come with portable zipper store pouch to store all of your tools after use. You won't worry about to lose them.
  • Package Include-11pcs interior trim disassemble tools, 2pcs release tools, 2pcs stereo removal tools, 3pcs Car terminal removal tools, 1pc Trim Clip Removal Pliers, and a portable storage bag.
Bestseller No. 8
4pcs Auto Door Clip Panel Trim Removal Tool Kits Audio Video Dashboard Dismantle Kits Installer Pry Tool
  • 【UNIQUE ERGONOMIC DESIGN】Works on interior and exterior trim, wide edge remover, narrow edge remover, pull-type remover, handle remover and upholstery clip remover.
  • 【EASY & CONVENIENT】It's also compact in size which makes it easy and convenient to carry or stash in your car so you can use it anytime, anywhere.Versatile tool set that pays for itself with just one use.
  • 【INSTALLATION ASSISTANT】Perfect for do it yourselfers, mechanics, and audio technicians who want to install a new car stereo, upgrade speakers, access the interior of doors or the dashboard for repairs.
  • 【SLEEK AND DURABLE SET】 Our premium grade Auto Trim Removal Tools fits in any crevices and works excellent in removing exterior & interior trim, molding, wheel hubs, door panels, fasteners, dashboards, and more without scratching or damaging your car.
  • 【 NO RISK PURCHASE】Wislter Dashboard Dismantle Kits uses the durable materials, Please contact our customer service if there's any question. Not satisfied? Please don't worry, return of goods is 100% guaranteed.
Bestseller No. 9
Auto Trim Removal Tool Kit, Wetado 15 Pcs Car Panel Door Window Tools Kit,Auto Clip Fastener Remover Pry Tool Set Blue
  • [5 Pack Trim Tools Kit] - 5 pcs different shape auto car trim removal tools, including 4 pcs car door panel removal tool and 1 pcs fastener remover.
  • [Multifunctional Use] - Auto Car Trim Remoaval Tools Set work great for car audio/radio system installing or removing, door panel, moldings, emblems, window trims or automotive interior repairing and furniture restoration.
  • [High-quality Material] - The trim pad remover is made of toughened stainless steel material, eco-friendly, non-toxic, lightweight. This upholstery remover is solid, corrosion-resistant and extremely durable, so it will last a lifetime.
  • [Ergonomic Design] - Easy to hold in hand fits hard to reach spaces and crevices. Save Your time, frustration and money.
  • [ WETADO Service ] - All fastener remover tools of our company enjoy the lifetime after-sale service. We firmly believe you'll love our upholstery combo repair kits, and if you aren't absolutely satisfied, return them within 60 days for a refund, no questions asked. Car trim removal tool kit is a ideal gift for Car lover, maintenance professionals, beginners and friends on Birthdays, Thanksgiving, Christmas, etc.
SaleBestseller No. 10
GOOACC 19Pcs Trim Removal Tool Set Panel Fastener Clips Removal Automotive Plastic Upholstery Pliers Removal Install Removal Car Tool with Storage Bag for Trim Panel Audio Clip Pliers Terminal
  • Multi-function tools: There are 19 pcs different kinds of panel removal tools, excellent for Automotive, Marine, Furniture or Aircraft Trim removal and installation, including Panels, Moldings, Window Trims, Clips, Fasteners, Emblems, Panels, Radios, etc...
  • Premium Grade Nylon: Made of impacted resistant nylon fiber material with high level craftsmanship, it’s non-toxic and have long last, not like brittle material which is easy to bent or crack
  • Good helper: Whenever you need them, they are always here to help you. It will be an excellent choice for you to work on your car with this set
  • No damaging: These tools helps you work on your car easily without damaging it. It won’t scratch or damage your car like some poor quality tools
  • Package Include:Including 11pcs interior trim disassemble tools, 2pcs release tools, 2pcs stereo removal tools, 3pcs Car terminal removal tools, 1pc Trim Clip Removal Pliers, and a portable storage bag

Last update on 2024-02-28 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...