Front and Rear Crossmember Corrosion (X69 Warranty Extension) – 2008-2012 Dodge Caliber & Jeep Compass/Patriot

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA ID Number: 10140027

Manufacturer Communication Number: 23-007-17 REV. B

Summary

Front And Rear Crossmember Corrosion (X69 Warranty Extension)

This bulletin involves inspecting the front and rear crossmembers for perforation/rust through and if necessary, replacing the crossmember(s).

Customers may describe a vibration at the steering wheel or may have been informed by a technician or state vehicle inspection that the front and/or rear crossmember is severely corroded.If the customer describes the symptom/condition listed above, perform the Diagnostic Procedure.

 

15 Affected Products

Vehicles

MAKE MODEL YEAR
DODGE CALIBER 2008-2012
JEEP COMPASS 2008-2012
JEEP PATRIOT 2008-2012

 


NUMBER: 23-007-17 REV. C
GROUP: 23 – Body
DATE: July 13, 2017

 

NOTE: This bulletin only applies to vehicles in the Canadian market and in salt belt states which include Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Washington, D.C., West Virginia and Wisconsin.

THIS BULLETIN SUPERSEDES SERVICE BULLETIN 23-007-17 REV B, DATED MARCH 10, 2017, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE A PM SRT PART NUMBER AND REMOVAL OF SRT PART AVAILABILITY NOTES.

 

SUBJECT:

Front and Rear Crossmember Corrosion (X69 Warranty Extension)

 

OVERVIEW:

This bulletin involves inspecting the front and rear crossmembers for perforation/rust through and if necessary, replacing the crossmember(s).

 

MODELS:

2008 – 2012 (PM) Dodge Caliber
2008 – 2012 (MK) Jeep Compass/Patriot

 

NOTE: This bulletin applies to vehicles within the following markets/countries: NAFTA.

NOTE: This bulletin applies to vehicles built on or before January 24, 2012 (MDH 0124XX).

 

SYMPTOM/CONDITION:

Customers may describe a vibration at the steering wheel or may have been informed by a technician or state vehicle inspection that the front and/or rear crossmember is severely corroded.

 

If the customer describes the symptom/condition listed above, perform the Diagnostic Procedure.

 

DIAGNOSIS PROCEDURE:

  1. Raise the vehicle on hoist. Refer to the detailed service procedures available in DealerConnect> TechCONNECT under: Service Info> 04 – Vehicle Quick Reference> Hoisting> Standard Procedure.
  1. NOTE: Any perforation/rust through of either suspension crossmember, regardless of hole size or area affected, will require crossmember replacement. Inspect the front and rear crossmembers for perforation/rust through (Fig. 1) . Was perforation/ rust through found on either the front or rear crossmember(s)?
    • YES >>> Continue to the Repair Procedure Step 1.
    • NO >>> Return the vehicle to the customer and advise the customer to return for yearly inspections until the vehicle reaches 10 years of age.

Fig. 1 Crossmember Needing ReplacementFig. 1 Crossmember Needing Replacement

1 – Suspension Crossmember Perforation/Rust Through

 

PARTS REQUIRED:

Qty. Description Part No.
**1 (AR) Crossmember Front (PM SRT Only)** CXA9X691AA
1 (AR) Crossmember, Front (PM & MK) (FWD & 4WD) CBLTN361AA
1 (AR) Crossmember, Rear (PM & MK 4WD) CBLTN363AB
1 (AR) Crossmember, Rear (PM & MK FWD) CBLTN366AB
1 (AR) Bolt Kit, Front Crossmember CBLTN362AA
1 (AR) Bolt Kit, Rear Crossmember CBLTN364AA
1 (AR) Isolator, Rear Differential Mounting CBLTN365AA Front and Rear Crossmember Corrosion (X69 Warranty Extension) - 2008-2012 Dodge Caliber & Jeep Compass/Patriot | small light

 

OPTIONAL PARTS:

Qty. Description Part No.
3 (AR) 10 mm Rivnuts – For vehicles with a steel skid plate 06505704AA
3 (AR) 6 mm Rivnuts – For vehicles with a Plastic Aero Shield 06104885AA

 

NOTE: New crossmembers do NOT come with rivnuts.

 

REPAIR PROCEDURE:

  1. Repair procedure involves replacing the front, rear or both crossmember(s):
    1. Replace the front crossmember. Refer to the detailed service procedures available in DealerConnect> TechCONNECT under: Service Info> 13 – Frame and Bumpers> Frame> Crossmember, Front Suspension> Removal/Installation.
    2. Adjust front toe only.
    3. Replace the rear crossmember. Refer to the detailed service procedures available in DealerConnect> TechCONNECT under: Service Info> 13 – Frame and Bumpers> Frame> Crossmember, Rear Suspension> Removal/Installation.
    4. Adjust rear toe only.

 

POLICY:

Warranty period for crossmember perforation/rust through is extended to 10 years.

Vehicles included in this Service Bulletin applies to U.S. Market (Sales Code YAA) and Canadian Market (Sales Code YAC). See Warranty Bulletins; U.S. D-17-05 and Canada SAB 2017-04 for details associated with the warranty extension.

 

TIME ALLOWANCE:

Labor Operation No: Description Skill Category Amount
13-30-01-9B Inspect Front and Rear Suspension Crossmembers (2 – Skilled) 4 – Chassis 0.2 Hrs.
13-30-01-9C Inspect Front and Rear Suspension Crossmembers, Replace Front Suspension Crossmember (2 – Skilled) 4 – Chassis 2.6 Hrs.
13-30-01-9D Inspect Front and Rear Suspension Crossmembers, Replace Rear Suspension Crossmember (2 – Skilled) 4 – Chassis 3.2 Hrs.
13-30-01-9E Inspect and Replace Both Front and Rear Suspension Crossmembers (2 – Skilled) 4 – Chassis 4.9 Hrs.

 

NOTE: LOPs include time for adjusting front and rear toe.

 

RELATED – OPTIONAL EQUIPMENT:

Labor Operation No: Description Skill Category Amount
13-30-01-9F 4WD Equipped (2 – Skilled) 4 – Chassis 0.7 Hrs.

 

FAILURE CODE:

ZZ Service Action

 


NUMBER: 23-007-17 REV. C
GROUP: 23 – Body
DATE: July 13, 2017

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [54.15 KB]

 


NUMBER: 23-007-17 REV. B
GROUP: Body
DATE: March 10, 2017

https://www.nhtsa.gov/recalls?nhtsaId=10140027

https://static.nhtsa.gov/odi/tsbs/2017/MC-10140027-9999.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [69.94 KB]

 


 

SaleBestseller No. 1
Rust-Oleum 248657 Rubberized Undercoating Spray, 15 oz, Black
  • Perfect for use on bare or primed metal underbodies of cars, trucks, trailers, RVs and more
  • Rubberized formula protects against corrosion and damage from water, salt and other chemicals
  • Dries to the touch in 30 minutes and covers up to 10-12 sq. ft. per can
  • Undercoating helps deaden sound and reduce damage to parts
  • Features a wide, comfort spray tip and any-angle spray technology for easy painting even upside down
SaleBestseller No. 2
Rust-Oleum 248656 Professional Grade Rubberized Undercoating Spray, 15 oz, Black
  • Perfect for use on bare or primed metal underbodies of cars, trucks, trailers, RVs and more
  • Professional-grade formula provides superior protection against corrosion and damage from water, salt and other chemicals
  • Dries to the touch in 1 hour and covers up to 10-15 sq. ft. per can
  • Undercoating helps deaden sound and reduce damage to parts
  • Features a wide, comfort spray tip and any-angle spray technology for easy painting even upside down
SaleBestseller No. 3
Bestseller No. 4
Rust-Oleum 344763 Automotive 2-in-1 Rust Reform & Seal, Quart, Black, 32 Fl Oz (Pack of 1)
  • Easy to use spray seals and protects metal surfaces from corrosion and moisture
  • Flexible, rubberized coating provides superior chemical and abrasion resistance
  • Dries to touch in 1-2 hours and covers 85-175 sq. ft. per qt. with rust protection
  • Apply by brush, roller or spray to repair rust problems and prevent future issues
  • Creates a protective coating with no shine, flat finish on rusted or bare metal
SaleBestseller No. 5
Fluid Film CNASB 1 Gal Bulk
  • FLUID FILM BLACK offer powerful corrosion protection for all metals and superior lubrication for moving parts. The long lasting thixotropic liquids and gels is aptly used in the highly corrosive marine environment and vehicle undercoating in the automotive and snow handling industries
  • HOW IT WORKS. The wet barrier creeps and migrates into tight seams and into the metal chassis to provide corrosion protection from salts and brines. Protects your vehicle while restoring a rich black color to the chassis or cover existing rust
  • NO SOLVENT. Formulated from specially processed wool-wax, highly refined petroleum oils and selected agents, providing a non-toxic, non-irritating, non-flammable coating for corrosion control, penetration, metal wetting and water displacement
  • WIDELY USED for maintenance of locks & hinges at home, lawn & garden tools & equipment, as well as in the aviation and automobile industries. In government and commercial facilities. Equipment in fishing, gas companies, farming, salt, power and industrial plants
  • SALVAGE DAMAGES. Damaged, heavily corroded and/or frozen parts such as nuts, bolts, shafts, etc. can be salvaged by applying FLUID FILM BLACK. It provides a non-toxic, non-irritating, non-flammable coating that remains in a permanently soft gel state
Bestseller No. 6
Eastwood Internal Frame Coating Aerosol | Internal chassiss Frame Rust Remover | Rust Converter and Prevention Aerosol Spray Undercoating for Vehicles |14 Oz, Black
  • FRAME COATING: This special aerosol spray is both a rust prevention and rust destroyer formula rolled into one. It will not only protect your chassis from the start of rust formation and allow you to maintain a clean finish, it also eliminates the need for any future maintenance or repairs, ensuring that it will be as good as new for years to come.
  • HOW TO USE: Shake the can vigorously for at least 1 minute before and occasionally during use. Insert extension tube into spray nozzle then insert extension nozzle into frame openings, bolt holes, etc.Depress spray button and apply coating while pulling the extension nozzle back from the opening. Continue in all areas you can for complete coverage.
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.
  • SAFETY INFORMATION: Always wear eye, skin and respiratory protection when applying this product.Use in a well ventilated area away from open flame. Store spray in a cool dry place. Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
  • WARRANTY: Comes with a 90-day limited warranty and 90-day return.
Bestseller No. 7
Permatex 80072-12PK Undercoating, 16 oz. net Aerosol Can (Pack of 12)
  • Protects fenders, frames, fuel tanks, door panels, rocker panels, hoods and firewalls against moisture, road salt and corrosion
  • Won't sag or drip
  • Sound-proofs and insulates
  • Body shop proven
  • Suggested Applications: Wheel wells, rocker panels, frames and underbody, body repairs, rust holes, tree pruning, driveway cracks, minor repairs, post preserver
SaleBestseller No. 8
3M 3584 Professional Grade Rubberized Undercoating 6 16oz Cans
  • Use on cars, trucks, and recreational vehicles
  • Coating helps prevent damage corrosion
  • Helps reduce road noise
  • Clean application
Bestseller No. 9
Permatex 80072 Undercoating, 16 oz. net Aerosol Can
  • Protects fenders, frames, fuel tanks, door panels, rocker panels, hoods and firewalls against moisture, road salt and corrosion
  • Won't sag or drip
  • Sound-proofs and insulates
  • Body shop proven
  • Suggested Applications: Wheel wells, rocker panels, frames and underbody, body repairs, rust holes, tree pruning, driveway cracks, minor repairs, post preserver
Bestseller No. 10
Rust-Oleum 248658 Rust Reformer Spray, 10.25 oz, Black
  • Use on any rusty, metal surface to Instantly convert rust to a flat black, paintable surface that is protected and prevents future rust
  • Oil based formula creates a bond with rusted surface that can be easily painted
  • Dries tack free in 20-40 minutes, allow 24 hours before applying topcoat
  • Unique formula transforms rusted surfaces saving time and effort sanding rust all the way down to bare metal
  • Any-angle spray technology allows the can to be sprayed in any direction, even upside down

Last update on 2024-03-19 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

15 thoughts on “Front and Rear Crossmember Corrosion (X69 Warranty Extension) – 2008-2012 Dodge Caliber & Jeep Compass/Patriot”

  1. I have a 2011 Jeep Patriot . I was just told my subframe was cracked and rusted. Only 9 years old . My question is this considered under the extended warranty recall for the front and rear crossmembers? Will they pay for it or is this something I will have to pay for can anyone help ! Thank you

    Reply
  2. I have a 2008 Dodge Caliber. I replaced the front cross member in 2018 & was reimbursed due to it being on an “extended warranty” list. We had no idea the whole underneath was actively rusting out.
    I was leaving work & the back cross member broke. The AAA driver said I probably would have been killed had I made it out on the road & been going 55mph.
    Just like all of you, Chrysler refused to fix my rusted out car that THEY BUILT because it was past the “extended warranty” time. Really? How can there be a deadline when our cars didn’t rust over night?
    Just think of the thousands of consumers who are driving these cars that Chrysler KNOWS have a potential to cause serious injury &/or fatality! They chose the “extended warranty” , because consumers didn’t have to be notified like they would if a RECALL was used.
    SHAME ON CHRYSLER.

    Reply
  3. Shame on Chrysler. Daughter in-law’s 2007 Caliber was just discovered to be completely rusted out. Must have had holes for years. Coverage under extended warranty ended April 2018. Of course she would have had it fixed if someone told her. She just put $1900 into the car for other things and has kept it regularly serviced. I did the front. Dealer wants $1900-$2300 to do rear. Should have been recalled. What is she supposed to do? Junk it?

    Reply
  4. Either this Recall bulletin is outdated or the manufacturer it is not covering this issue.
    I own a Jeep Patriot 2008 in Quebec, Canada. After been told by a mechanic that the subframe it’s completely rusty and that it needs to be replaced. I reach them asking about a recall on this issue as said in this bulletin, but they said that there is not such a recall available on my vehicle. I guess i’m gonna have to solve this issue in any other garage from my pocket :S .

    Reply
    • I too have this vehicle. It appears that the recall extended the warranty for 10 yrs. Our vehicles are 2008, therefor as of jan 1, 2019 the recall is out of warranty for us because the vehicles are officially 11 years old. I think its crap myself because obviously the rust didnt happen overnight and its obvious that the issue was present in December 2018 but the will not honor it now. Pathetic if you ask me!!!
      ANGRY in WV

      Reply
  5. I have a 2008 Dodge Avenger R/T. Was just informed by the shop after having an oil change done and a multi point inspection that the rear suspension crossmember is corroded and in need of replacement.
    Has anyone else had this problem and could it also be part of the recall for the Caliber, Patriot and Compass ?

    Reply
  6. I had the crossmember repair done on my 2012 Caliber. However, The dealership informed me that after the repair the car need to be aligned? It did not need the alignment prior to the repair. The service manager claimed Dodge does not cover the alignment once the repair is made. This is ridiculous, the defect repair caused the need for the alignment. If it is not rectified It will be the last Dodge product I purchase.

    Reply
    • I have a 2011 Dodge Caliber that the uni-body is rusted and making a lot of noises when i drive it and feels very unsafe. I brought it to Bettenhausen Dodge in Orland Park, il. and they told me it would all be covered, then a week later before i’m scheduled to bring it in the service guy text’s me and said that i will have an out of pocket expense if other parts are needed to replace it. I should not be responsible for any part or labor for this replacement!!! Has anyone else had this issue? I am supposed to bring the car in this Tuesday for the extended warranty repair and not sure what i should do since i do NOT have the money for additional charges that they want to charge me. This is unacceptable that they would even think the customer should pay for any part of this. VERY UPSET in Illinois. Any advice out there?

      Reply
  7. I have a 2009 Dodge Caliber that has both crossmembers rusted through. It was built in the US then exported and sold through a dealer in Canada. It was then either imported back to the US or the owner moved to the US. I bought it used and live in one of the salt laden states (Michigan). However, Chrysler is refusing to honor the extended warranty. This should be illegal.

    Reply

Leave a Reply to oemdtc Cancel reply

2
Share to...