Safety Recall U09 / NHTSA 18V-098 Brake Lamp Switch – 2017 Dodge Caravan & Jeep Wrangler

February 8, 2018

Brake Switch may Malfunction

Having the brake lamps continuously illuminated or being able to shift the vehicle out of PARK when the brake pedal is not pressed (and the ignition is in the RUN mode) can increase the risk of a crash.

 

NHTSA Campaign Number: 18V098

Manufacturer Chrysler (FCA US LLC)

Components SERVICE BRAKES, HYDRAULIC

Potential Number of Units Affected 39,456

 

Summary

Chrysler (FCA US LLC) is recalling certain 2017 Dodge Caravan and Jeep Wrangler vehicles. The brake switches on these vehicles may malfunction, keeping the brake lights illuminated and/or allowing the vehicle to be shifted out of the PARK position without the brake pedal being pushed.

 

Remedy

Chrysler will notify owners, and dealers will replace the brake switches, free of charge. The recall began March 22, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler’s number for this recall is U09.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Vehicle has a Recall

 

---

March 2018

Dealer Service Instructions for:

Safety Recall U09 / NHTSA 18V-098 Brake Lamp Switch

 

Models

2017	(RT)	Dodge Grand Caravan
2017	(JK)	Jeep® Wrangler

 

NOTE:  This recall applies only to the above vehicles built from August 07, 2017 through September 20, 2017 (MDH 080700 through 092015).

 

IMPORTANT:  Some of the involved vehicles may be in dealer new vehicle inventory.  Federal law requires you to complete this recall service on these vehicles before retail delivery.  Dealers should also consider this requirement to apply to used vehicle inventory and should perform this recall on vehicles in for service.  Involved vehicles can be determined by using the VIP inquiry process.

 

Subject

The brake lamp switch on about 39,400 of the above vehicles may malfunction which can be identified by a Malfunction Indicator Lamp (MIL) illumination, an audible chime, and the brake lights will be illuminated. A malfunctioning brake switch could allow the vehicle to be shifted out of PARK without the brake pedal being depressed, and could cause the rear brake lamps to be continuously illuminated.  Being able to shift a vehicle out of PARK when the brake pedal is not depressed (and the ignition is in the RUN mode) and/or having the rear brake lamps continuously illuminated, can cause a vehicle to crash without prior warning.

 

Repair

The brake lamp switch must be replaced.

 

Parts Information

Description	Part Number
Switch, Brake Lamp	CSFHU091AA

 

Parts Return

No parts return required for this campaign.

 

Special Tools

No special tools are required to perform this service procedure.

 

Service Procedure

Replace Brake Lamp Switch

WARNING: To avoid serious or fatal injury on vehicles equipped with airbags, disable the Supplemental Restraint System (SRS) before attempting any steering wheel, steering column, airbag, seat belt tensioner, impact sensor or instrument panel component diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the SRS. Failure to take the proper precautions could result in accidental airbag deployment.

1. Disconnect and isolate the battery negative cable.

2. Locate the brake lamp switch below the steering column (Figures 1 and 2).

Figure 1 – JK Brake Lamp Switch Location

 

3. Depress and hold the brake pedal in the depressed position.

4. Rotate the brake lamp switch housing counterclockwise about 30 degrees to align the switch locking collar with the keyed square hole in the brake pedal mounting bracket.

5. Pull the switch straight back from the keyed hole to remove it from the bracket.

6. Release the brake pedal.

7. Disconnect the body wire harness electrical connector from the brake lamp switch (Figures 1 and 2).

8. Remove and discard the brake lamp switch.

Figure 2 – RT Brake Lamp Switch Location

 

9. Be certain that the new brake lamp switch plunger is pulled all the way out of the switch housing to its fully extended position.
10. Connect the body wire harness electrical connector to the connector receptacle on the switch.
11. Depress and hold the brake pedal in the depressed position.
12. Align the keyed locking collar on the brake lamp switch with the keyed square hole in the brake pedal mounting bracket.
13. Insert the brake lamp switch locking collar through the keyed hole in the mounting bracket until the switch housing is firmly seated against the bracket.
14. Rotate the switch housing clockwise about 30 degrees to engage the locking collar with the switch mounting bracket.
15. Release the brake pedal. The pedal will set the plunger to the correct position as the pedal pushes the plunger into the switch housing. The switch plunger will make a light audible ratcheting noise as it self-adjusts.
16. Connect the battery negative cable.
17. Depress the brake pedal and confirm the brake lamps illuminate.
18. With the key in the ON position and the brake pedal not depressed attempt to shift from Park to Reverse or Drive. When the key is in the ON position and the brake pedal is not depressed, the shifter is locked and should not move into any position.
19. Return the vehicle to the customer.

 

Complete Proof of Correction Form for California Residents

This recall is subject to the State of California Registration Renewal/Emissions Recall Enforcement Program.  Complete a Vehicle Emission Recall Proof of Correction Form (Form No. 81-016-1053) and supply it to vehicle owners residing in the state of California for proof that this recall has been performed when they renew the vehicle registration.

 

Completion Reporting and Reimbursement

Claims for vehicles that have been serviced must be submitted on the DealerCONNECT Claim Entry Screen located on the Service tab.   Claims paid will be used by FCA to record recall service completions and provide dealer payments.

 

Use of following labor operation number and time allowance:

	Labor Operation Number	Time Allowance
Replace Brake Lamp Switch	08-U0-91-82	0.2 hours

 

NOTE:  See the Warranty Administration Manual, Recall Claim Processing Section, for complete recall claim processing instructions.

 

Dealer Notification

To view this notification on DealerCONNECT, select “Global Recall System” on the Service tab, then click on the description of this notification.

 

Owner Notification and Service Scheduling

All involved vehicle owners known to FCA are being notified of the service requirement by first class mail.  They are requested to schedule appointments for this service with their dealers.  A generic copy of the owner letter is attached.

 

Vehicle Lists, Global Recall System, VIP and Dealer Follow Up

All involved vehicles have been entered into the DealerCONNECT Global Recall System (GRS) and Vehicle Information Plus (VIP) for dealer inquiry as needed.

GRS provides involved dealers with an updated VIN list of their incomplete vehicles.  The owner’s name, address and phone number are listed if known.  Completed vehicles are removed from GRS within several days of repair claim submission.

To use this system, click on the “Service” tab and then click on “Global Recall System.”  Your dealer’s VIN list for each recall displayed can be sorted by: those vehicles that were unsold at recall launch, those with a phone number, city, zip code, or VIN sequence.

Dealers must perform this repair on all unsold vehicles before retail delivery. Dealers should also use the VIN list to follow up with all owners to schedule appointments for this repair.

Recall VIN lists may contain confidential, restricted owner name and address information that was obtained from the Department of Motor Vehicles of various states.  Use of this information is permitted for this recall only and is strictly prohibited from all other use.

 

Additional Information

If you have any questions or need assistance in completing this action, please contact your Service and Parts District Manager.

Customer Services / Field Operations

FCA US LLC

---

 

This notice applies to your vehicle,

 [Model Year and Model]  VIN XXXXXXXXXXXXXXXXX U09/NHTSA 18V- 098

 

LOGO

VEHICLE PICTURE

YOUR SCHEDULING OPTIONS

 

1. RECOMMENDED OPTION Call your authorized Chrysler / Dodge / Jeep_® / RAM Dealership 

2. Call the FCA Recall Assistance Center at 1-800-853-1403. An agent can confirm part availability and help schedule an appointment 

3. Visit mopar.com, scan the QR code below, or download the Mopar Owner’s Companion App.

 

QR Code

 

Get access to recall notifications, locate your nearest dealer, and more through this website or Mopar Owner’s Companion App. You will be asked to provide your Vehicle Identification Number (VIN) to protect and verify your identity. The last eight characters of your VIN are provided above.

 

DEALERSHIP INSTRUCTIONS

Please reference Safety Recall U09.

---

IMPORTANT SAFETY RECALL

Brake Lamp Switch

 

Dear [Name],

 

This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.

 

FCA has decided that a defect, which relates to motor vehicle safety, exists in certain [2017 model year (RT) Dodge Caravan and (JK) Jeep® Wrangler] vehicles.

 

It is extremely important to take steps now to repair your vehicle to ensure the safety of you and your passengers.

 

WHY DOES MY VEHICLE NEED REPAIRS?

The brake lamp switch on your vehicle ^[1] may malfunction which can be identified by a Malfunction Indicator Lamp (MIL) illumination, an audible chime, and the brake lights will be illuminated. A malfunctioning brake switch could allow the vehicle to be shifted out of PARK without the brake pedal being depressed, and could cause the rear brake lamps to be continuously illuminated.  Being able to shift a vehicle out of PARK when the brake pedal is not depressed (and the ignition is in the RUN mode) and/or having the rear brake lamps continuously illuminated, can cause a vehicle to crash without prior warning.

 

HOW DO I RESOLVE THIS IMPORTANT SAFETY ISSUE?

FCA will repair your vehicle ^[2] free of charge (parts and labor).  To do this, your dealer will replace the brake lamp switch.  In addition, your dealer will require your vehicle for proper check-in, preparation, and check-out during your visit.  Your time is important to us; please be aware that these steps may require more time.  The estimated repair time is one hour.  We recommend that you schedule a service appointment to minimize your inconvenience.  Please bring this letter with you to your dealership.

 

TO SCHEDULE YOUR FREE REPAIR CALL 1-800-853-1403
OR YOUR CHRYSLER, DODGE, JEEP OR RAM DEALER TODAY

 

CALIFORNIA RESIDENTS

The State of California requires the completion of emission recall repairs prior to vehicle registration renewal.  Your dealer will provide you with a Vehicle Emission Recall Proof of Correction Form after the Emission Recall service is performed.  Be sure to save this form since the California Department of Motor Vehicles may require that you supply it as proof that the Emission Recall has been performed.

 

WHAT IF I ALREADY PAID TO HAVE THIS REPAIR COMPLETED?

If you have already experienced this specific condition and have paid to have it repaired, you may visit www.fcarecallreimbursement.com to submit your reimbursement request online. ^[3] Once we receive and verify the required documents, reimbursement will be sent to you within 60 days.  If you have had previous repairs performed and/or already received reimbursement, you may still need to have the recall repair performed.

 

We apologize for any inconvenience, but are sincerely concerned about your safety.  Thank you for your attention to this important matter.

 

Customer Assistance/Field Operations Fiat Chrysler Automobiles US LLC

---

Mr. Mrs. Customer
1234 Main Street
Hometown, MI 48371

 

[1] If you no longer own this vehicle, please help us update our records. Call the FCA Recall Assistance Center at 1-800-853-1403 to update your information.

[2] If your dealer fails or is unable to remedy this defect without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC  20590, or you can call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-4249153), or go to safercar.gov.

[3] You can also mail in your original receipts and proof of payment to the following address for reimbursement consideration: FCA Customer Assistance, P.O. Box 21-8004, Auburn Hills, MI 48321-8007, Attention: Recall Reimbursement.

 

Note to lessors receiving this recall notice: Federal regulation requires that you forward this recall notice to the lessee within 10 days.

---

2 Affected Products

Vehicles

MAKE	MODEL	YEAR
DODGE	CARAVAN	2017
JEEP	WRANGLER	2017

 

---

12 Associated Documents

Manufacturer Notices(to Dealers,etc) – 02/15/2018 New Safety Recall Advanced Communication – U09

RCMN-18V098-5095.pdf 129.984KB

 

---

Sent: Thursday, March 15, 2018 Subject: FCA – Safety Recall U09 / NHTSA 18V-098 – Brake Light Switch

RMISC-18V098-2924.pdf 425.692KB

 

---

Remedy Instructions and TSB – March 2018

RCRIT-18V098-8234.pdf 666.409KB

 

---

ISSUED Owner Notification Letter(Part 577)

RCONL-18V098-9032.pdf 317.201KB

 

---

Chronology

RMISC-18V098-5694.pdf 119.259KB

 

---

Recall Acknowledgement

RCAK-18V098-7606.pdf 247.516KB

 

---

Defect Notice 573 Report

RCLRPT-18V098-5720.PDF 215.826KB

 

---

Renotification Representative Copy

RMISC-18V098-0165.pdf 41.772KB

 

---

Recall Quarterly Report #3, 2018-3

RCLQRT-18V098-1421.PDF 211.336KB

 

---

ISSUED Renotification Notice

RCRN-18V098-4489.pdf 112.966KB

 

---

Recall Quarterly Report #4, 2018-4

RCLQRT-18V098-5336.PDF 211.452KB

 

---

Recall Quarterly Report #5, 2019-1

RCLQRT-18V098-4640.PDF 211.564KB

 

---

Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V098&docType=RCL

---

 

Last update on 2024-04-16 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.