“This site contains affiliate links for which OEMDTC may be compensated” |
NUMBER: 06-006-07
GROUP: Clutch
DATE: December 5, 2007
SUBJECT:
Clutch Pedal Squeak
OVERVIEW:
This bulletin involves lubricating the clutch master cylinder pushrod ball socket (attachment at clutch pedal arm).
MODELS:
2007 | (JS) | Sebring |
2007 | (PM) | Caliber |
2007 | (MK49) | Compass |
NOTE: **This information applies to models equipped with a T-355 or BG6 Manual Transmission (Sales Code DD7 or DEF) built prior to February 8, 2007 (MDH0208XX)**.
SYMPTOM/CONDITION:
A squeak sound may be heard when applying or releasing the clutch pedal. This may be more noticeable in cold temperatures.
DIAGNOSIS:
If the customer describes a squeak sound when applying the clutch pedal, perform the Repair Procedure
PARTS REQUIRED:
Qty. | Part No. | Description |
---|---|---|
1 | 05019061AA | Grease, Silicone Based (MS7751) 1 tube will service 20 vehicles |
REPAIR PROCEDURE:
- Remove the lower instrument panel bezel.
- Disconnect clutch master cylinder pushrod from clutch pedal arm (Fig. 1).
- Lubricate the pushrod ball socket with a small amount of Silicone Grease pn 05019061AA.
Fig. 1 MASTER CYLINDER
3 – Push Rod Ball Socket Attached to Clutch Pedal Arm
- Connect clutch master cylinder rod to clutch pedal pin. An audible “click” should be heard.
- Install lower instrument panel bezel.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No: | Description | Amount |
---|---|---|
06-45-01-90 | Pedal, Clutch – Lubricate (B) | 0.2 |
Optional Equipment | ||
06-45-01-61 | PM/MK49 Models – Airbag Knee Blocker Equipped-Remove and Install | 0.3 |
FAILURE CODE:
ZZ | Service Action |
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 06-001-06, DATED OCTOBER 17, 2006, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDES THE ADDITION OF CLEAN POINTS.