2024 Jeep Wagoneer

A7A – Third Row Seat Belt Buckle – 2022-2024 Jeep Wagoneer & Grand Wagoneer

by
“This site contains affiliate links for which OEMDTC may be compensated”

October 26, 2023 NHTSA CAMPAIGN NUMBER: 23V716000

Seat Belt Assembly Inaccessible/FMVSS 208 & 209

An unfastened seat belt may increase the risk of injury to occupants during a crash.

 

NHTSA Campaign Number: 23V716000

Manufacturer Chrysler (FCA US, LLC)

Components SEAT BELTS

Potential Number of Units Affected 97,066

 

Summary

Chrysler (FCA US, LLC) is recalling certain 2022-2024 Jeep Wagoneer and Grand Wagoneer vehicles. The third-row seat belts may not allow occupants to properly access or fasten the seat belt to the buckle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, “Occupant Crash Protection” and 209, “Seat Belt Assemblies.”

 

Remedy

Dealers will inspect and replace the third-row seat belt buckle, as necessary, free of charge. Owner notification letters are expected to be mailed December 15, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC’s number for this recall is A7A.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check if your Vehicle has a Recall

 

New Safety Recall Advanced Communication – A7A

FCA US LLC (FCA US) has announced a safety recall on certain 2022 through 2024 Model Year (WS) Wagoneer and Grand Wagoneer.

 

REASON FOR THIS SAFETY RECALL

Some of the above vehicles may have been built with third-row seat belt buckles that are inaccessible or damaged. An inaccessible or damaged buckle may leave the occupant unable to fasten the seat belt. If this warning is not heeded, an unfastened seat belt may increase the risk of injury to occupants during certain types of crashes.

Federal Motor Vehicle Safety Standard (“FMVSS”) No. 571.208 Occupant crash protection. S7.2 Latch mechanism. states that “…each seat belt assembly installed in any vehicle shall have a latch mechanism that complies with the requirements specified in S7.2(a) through (d), [about accessibility and function for release]…”. FMVSS No. 571.209 Seat belt assemblies. S4.4 Requirements for assembly performance. …(b) states “Type 2 seat belt assembly. … a Type 2 seat belt assembly including webbing, straps, buckles, adjustment and attachment hardware, and retractors shall comply with the following requirements when tested by the procedure specified in S5.3(b): (1) The structural components in the pelvic restraint shall withstand … 11,120 N.” Suspect vehicles may not allow occupants to properly access or fasten the seat belt to the buckle.

 

SERVICE ACTION

FCA US will conduct a voluntary safety recall on all affected vehicles to inspect and, if necessary, replace the third-row seat belt buckle. The remedy for this condition is not currently available. Dealers will be notified of the launch of this safety recall by way of established communication methods. This recall is estimated to launch in 4th Quarter of 2023.

 

SAFETY RECALL
NORTH AMERICA
Seatbelt Buckle

Reference: A7A / NHTSA 23V-716

Remedy available for

2022-2024 (WS) Jeep Wagoneer/Grand Wagoneer

Template Version 1.0

Revision Edition Detail
0 November 2023 Initial Version.

 

SYMPTOM DESCRIPTION

The third row seatbelt buckles on about 104,400 of the above vehicles may have been built with buckles that are inaccessible or damaged. An inaccessible or damaged buckle may leave the occupant unable to fasten the seat belt. If this warning is not heeded, an unfastened seat belt may increase the risk of injury to occupants during certain types of crashes.

 

SCOPE

This recall applies only to the above vehicles.

NOTE: Some vehicles above may have been identified as not involved in this recall and therefore have been excluded from this recall.

IMPORTANT:  Some of the involved vehicles may be in dealer new vehicle inventory.  Federal law requires you to complete this recall service on these vehicles before retail delivery.  Dealers should also consider this requirement to apply to used vehicle inventory and should perform this recall on vehicles in for service.  Involved vehicles can be determined by using the VIP inquiry process.

 

REPAIR TO BE PERFORMED

Inspect that the third row seat belt buckles are accessible and not damaged. Operate the buckles and ensure that they operate properly. If there is visible damage, or they do not operate properly, replace the buckles.

 

PARTS INFORMATION

See StarParts for the proper belt parts numbers.

NOTE: If the needed parts are not immediately available, print out the last page of this document, mark which seating position(s) is not to be used, and provide the page to the customer.

 

PARTS RETURN

No parts return required for this campaign.

Render the recalled parts unusable and discard.

 

SPECIAL TOOLS

No special tools are required.

 

OWNER NOTIFICATION / SERVICE SCHEDULING

All involved vehicle owners known to FCA are being notified of the service requirement by first class mail.  They are requested to schedule appointments for this service with their dealers.  A generic copy of the owner letter is attached.

 

SERVICE PROCEDURE

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts, buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the Mopar® Parts Catalog. Failure to follow these instructions may result in possible serious or fatal injury.

NOTE: While removed, do not fold the seat backs down or recline the seat. This will cause the seats to become out of sync to each other, and this condition cannot be corrected.

NOTE: Ensure the seat is in the upright position and not folded flat when removing from vehicle. The 40% and 60% seats can be serviced separately but must remain in the upright/locked position during the whole time it is removed from the vehicle.

 

A. Remove Cargo Load Floor (All Seating Positions)

  1. Open the liftgate.

 

  1. Using a trim stick or equivalent, release the retaining clips that secure the liftgate sill scuff plate to the rear sill and remove it from the vehicle (Figure 1).

 

  1. Long Wheelbase vehicle – Remove fasteners that secure the cargo rails to the rear floor. Remove cargo rails (Figure 2).

 

  1. Open the cargo floor cover.

 

  1. Remove the bolts (1) and nuts (2) that secure the cargo load floor (3) to the body (Figure 3).

 

  1. Remove the cargo load floor (1) from the vehicle (Figure 4).

 

Third Row Left Outer Seatbelt Buckle (40%)

B. Remove

  1. As needed, disengage the retaining tabs and remove the rear air duct (1) from the vehicle (Figure 5).

 

  1. Remove the third row left outer seat to floor bolt covers and bolts (2) from the front position. Discard the old bolts. (Figure 6).

 

  1. Remove the third row seat to floor nuts (1) from the rear position (Figure 7).

 

  1. Disengage the wire harness retainer (4) from the marriage bracket (3) (Figure 8).

 

  1. Remove the screws (1) from the marriage bracket (3) and remove the bracket from the seats (2). Discard the screws (Figure 8).

 

NOTE: Care should be used when moving the seats to protect the interior trim. 

 

NOTE: While removed, do not fold the seat backs down or recline the seat. This will cause the seats to become out of sync to each other, and this condition cannot be corrected.

 

NOTE: Ensure the seat is in the upright position and not folded flat when removing from vehicle. The 40% and 60% seats can be serviced separately but must remain in the upright/locked position during the whole time it is removed from the vehicle.

 

  1. Roll the seat forward into the footwell.

 

  1. Remove the third row left seatbelt buckle bolt (1) from the buckle anchor (Figure 9).

 

  1. Remove the buckle (2) from the vehicle (Figure 9).

 

C.  Install
  1. Place the NEW seatbelt buckle into position on the seat (Figure 9).

 

  1. Tighten the NEW bolt provided with the buckle to 48 N·m (35 Ft. Lbs.).

 

NOTE: Care should be used when moving the seats to protect the interior trim. 

 

  1. Roll the seat back into position on the floor.

 

  1. Install the marriage bracket to the seats (2) (Figure 8). Install NEW screws (1) into the marriage bracket (3) and tighten to 28 N·m (21 Ft. Lbs.).

 

  1. Secure the wire harness retainer (4) to the marriage bracket (3) (Figure 8).

 

  1. Install the third row seat to floor nuts (1) and tighten to 50 N·m (37 Ft. Lbs.) (Figure 7).

 

  1. Install the NEW third row right outer seat to floor bolt bolts (2) and tighten to 50 N·m (37 Ft. Lbs.) (Figure 6).

 

  1. Install the seat bolt covers.

 

  1. Install the rear air duct (1) to the vehicle and engage the retaining tabs (Figure 5).

 

Third Row Right Outer Seatbelt Buckle (60%)

D. Remove

  1. As needed, disengage the retaining tabs and remove the rear air duct (1) from the vehicle (Figure 10).

 

  1. Remove the third row right outer seat to floor bolt covers and bolts (2) from the front position. Discard the bolts. (Figure 11).

 

  1. Position the seats to the upright position.

 

  1. Remove the third row seat to floor nuts (1) from the rear position (Figure 12).

 

  1. Disengage the wire harness retainer (4) from the marriage bracket (3) (Figure 13).

 

  1. Remove the screws (1) from the marriage bracket (3) and remove the bracket from the seats (2). Discard the screws (Figure 13).

 

NOTE: Care should be used when moving the seats to protect the interior trim. 

 

NOTE: While removed, do not fold the seat backs down or recline the seat. This will cause the seats to become out of sync to each other, and this condition cannot be corrected.

 

NOTE: Ensure the seat is in the upright position and not folded flat when removing from vehicle. The 40% and 60% seats can be serviced separately but must remain in the upright/locked position during the whole time it is removed from the vehicle.

 

  1. Roll the seat forward into the footwell.

 

  1. Remove the third row right seat belt buckle bolt (1) from the buckle anchor (Figure 14).

 

  1. Roll the seat back onto the floor.

 

  1. Raise the lower seat cushion.

 

  1. Remove the buckle (2) from the seat (Figure 14).

 

E. Install

  1. Place the NEW seatbelt buckle into position on the seat (Figure 14).

 

  1. Lower the seat cushion.

 

NOTE: Care should be used when moving the seats to protect the interior trim. 

 

  1. Roll the seat forward into the footwell.

 

  1. Tighten the NEW bolt provided with the buckle to 48 N·m (35 Ft. Lbs.) (Figure 14).

 

  1. Roll the seat back onto the floor.

 

  1. Install the marriage bracket to the seats (2) (Figure 13). Install NEW screws (1) into the marriage bracket (3) and tighten to 28 N·m (21 Ft. Lbs.).

 

  1. Secure the wire harness retainer (4) to the marriage bracket (3) (Figure 13).

 

  1. Install the third row seat to floor nuts (1) and tighten to 50 N·m (37 Ft. Lbs.) (Figure 12).

 

  1. Install the NEW third row right outer seat to floor bolt bolts (2) and tighten to 50 N·m (37 Ft. Lbs.) (Figure 11).

 

  1. Install the seat bolt covers.

 

  1. Install the rear air duct (1) to the vehicle and engage the retaining tabs (Figure 10).

 

Both Third Row Left Outer Seatbelt Buckle (40%) and Third Row Right Outer Seatbelt Buckle (60%)

F. Remove

  1. As needed, disengage the retaining tabs and remove the rear air duct (1) from the vehicle (Figure 5).

 

  1. Remove the third row left outer seat to floor bolt covers and bolts (2) from the front position. Discard the old bolts. (Figure 6).

 

  1. Remove the third row seat to floor nuts (1) from the rear position (Figure 7).

 

  1. Disengage the wire harness retainer (4) from the marriage bracket (3) (Figure 8).

 

  1. Remove the screws (1) from the marriage bracket (3) and remove the bracket from the seats (2). Discard the screws (Figure 8).

 

NOTE: Care should be used when moving the seats to protect the interior trim. 

 

NOTE: While removed, do not fold the seat backs down or recline the seat. This will cause the seats to become out of sync to each other, and this condition cannot be corrected.

 

NOTE: Ensure the seat is in the upright position and not folded flat when removing from vehicle. The 40% and 60% seats can be serviced separately but must remain in the upright/locked position during the whole time it is removed from the vehicle.

 

  1. Roll the seat forward into the footwell.

 

  1. Remove the third row left seat belt buckle bolt (1) from the buckle anchor (Figure 9).

 

  1. Remove the buckle (2) from the vehicle (Figure 9).

 

  1. Remove the third row right outer seat to floor bolt covers and bolts (2) from the front position. Discard the bolts. (Figure 11).

 

  1. Position the seats to the upright position.

 

NOTE: Care should be used when moving the seats to protect the interior trim. 

 

NOTE: While removed, do not fold the seat backs down or recline the seat. This will cause the seats to become out of sync to each other, and this condition cannot be corrected.

 

NOTE: Ensure the seat is in the upright position and not folded flat when removing from vehicle. The 40% and 60% seats can be serviced separately but must remain in the upright/locked position during the whole time it is removed from the vehicle.

 

  1. Remove the third row right seat belt buckle bolt (1) from the buckle anchor (Figure 14).

 

  1. Raise the lower seat cushion.

 

  1. Remove the buckle (2) from the seat (Figure 14).

 

G. Install

  1. Place the NEW seatbelt buckle into position on the third row right outer seat (Figure 14).

 

  1. Lower the seat cushion.

 

NOTE: Care should be used when moving the seats to protect the interior trim.

 

  1. Tighten the NEW bolt provided with the buckle to 48 N·m (35 Ft. Lbs.) (Figure 14).

 

  1. Install the NEW third row right outer seat to floor bolt bolts (2) and tighten to 50 N·m (37 Ft. Lbs.) (Figure 11).

 

  1. Install the seat bolt covers.

 

  1. Place the NEW third row left seat seatbelt buckle into position on the seat (Figure 9).

 

  1. Tighten the NEW bolt provided with the buckle to 48 N·m (35 Ft. Lbs.).

 

NOTE: Care should be used when moving the seats to protect the interior trim.

 

  1. Roll the seat back into position on the floor.

 

  1. Install the marriage bracket to the seats (2) (Figure 8). Install NEW screws (1) into the marriage bracket (3) and tighten to 28 N·m (21 Ft. Lbs.).

 

  1. Secure the wire harness retainer (4) to the marriage bracket (3) (Figure 8).

 

  1. Install the third row seat to floor nuts (1) and tighten to 50 N·m (37 Ft. Lbs.) (Figure 7).

 

  1. Install the NEW third row right outer seat to floor bolt bolts (2) and tighten to 50 N·m (37 Ft. Lbs.) (Figure 6).

 

  1. Install the seat bolt covers.

 

  1. Install the rear air duct (1) to the vehicle and engage the retaining tabs (Figure 5).

 

H.  Install Cargo Load Floor (All Seating Positions)

  1. Place the cargo load floor (1) into the vehicle (Figure 4).

 

  1. Install the bolts (1) and nuts (2) that secure the cargo load floor (3) to the body and tighten the bolts to 11 N·m (8 Ft. Lbs.) and the nuts to 7 N·m (62 In. Lbs.) (Figure 3).

 

  1. Close the cargo floor cover.

 

  1. Long Wheelbase vehicle – Install the fasteners that secure the cargo rails to the rear floor (Figure 2).

 

  1. Align and secure the retaining clips that secure the liftgate sill scuff plate to the rear sill (Figure 1).

 

  1. Close the liftgate.

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [686.55 KB]

 

Chronology :

  • On October 20, 2022, the FCA US LLC (“FCA US”) Technical Safety and Regulatory Compliance (“TSRC”) organization was notified of a potential issue related to third-row seat belt buckles being damaged or scratched in some 2022 MY Jeep Wagoneer and Jeep Grand Wagoneer vehicles.
  • From October 2022, through January 2023, FCA US TSRC analyzed warranty claims, customer records, and vehicle history to identify incidents of third-row seat belt buckles being damaged during assembly. In parallel, FCA US TSRC held initial meetings with FCA US Restraints Engineering and Manufacturing to review the issue, understand the part design, assembly process, and failure mode.
  • From January 2023, through June 2023, FCA US TSRC held initial meetings with FCA US Interior Engineering,
    and ongoing meetings with FCA US Restraints Engineering and Manufacturing to continue to review the issue and understand the potential consequence.
  • From June 2023, through September 2023, FCA US TSRC finalized discussions with FCA US Restraints Engineering, Interior Engineering, and Manufacturing and determined the suspect population.
  • On September 27, 2023, the FCA US TSRC organization recognized a vehicle build issue existed on certain vehicles related to third-row seat belt buckles being inaccessible or damaged, potentially resulting in a noncompliance with FMVSS No. 208 Occupant Crash Protection and FMVSS No. 209 Seat Belt Assemblies.
  • On October 19, 2023, FCA US determined, through the Vehicle Regulations Committee, to conduct a voluntary safety recall of the affected vehicles.

 

6 Affected Products

Vehicles

MAKE MODEL YEAR
JEEP GRAND WAGONEER 2022-2024
JEEP WAGONEER 2022-2024

 

5 Associated Documents

Recall Acknowledgement

RCAK-23V716-7249.pdf 645.412KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.29 KB]

 

Miscellaneous Document – Third Row Seat Belt Buckle Part Numbers by Model Year

RMISC-23V716-3794.pdf 101.193KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [98.82 KB]

 

Noncompliance Notice 573 Report

RCLRPT-23V716-5715.PDF 215.628KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.57 KB]

 

Manufacturer Notices(to Dealers,etc) – New Safety Recall Advanced Communication – A7A

RCMN-23V716-4271.pdf 49.95KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [48.78 KB]

 

Remedy Instructions and TSB

RCRIT-23V716-9194.pdf 703.031KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [686.55 KB]

 

Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V716&docType=RCL

 

 

Bestseller No. 1
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission, Check Engine Code Reader,Diagnostic Scan Tool with SRS Airbag Scanner, Car Diagnostic Scanner for All Cars with Battery Test
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission, Check Engine Code Reader,Diagnostic Scan Tool with SRS Airbag Scanner, Car Diagnostic Scanner for All Cars with Battery Test
  • 【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
  • 【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
  • 【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
  • 【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
  • 【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
$169.99 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 2
Autel AutoLink AL619 Scanner, 2024 ABS SRS Airbag Warning Light Diagnostic Scan Tool, Up of AL519 ML519 ML619, 10 OBDII Test Modes, DTCs Lookup, Live Data, Turn Off Check Engine Light OBD2 Code Reader
Autel AutoLink AL619 Scanner, 2024 ABS SRS Airbag Warning Light Diagnostic Scan Tool, Up of AL519 ML519 ML619, 10 OBDII Test Modes, DTCs Lookup, Live Data, Turn Off Check Engine Light OBD2 Code Reader
  • 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
  • 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
  • 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
  • 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
  • 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
$99.99 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 3
FOXWELL NT630 Plus OBD2 Scanner Diagnostic Tool, 2024 ABS Scan Tool Bleeding Brake SRS Scanner Car Code Reader Bidirectional Scanner with Airbag Light Reset SAS Oil Light
FOXWELL NT630 Plus OBD2 Scanner Diagnostic Tool, 2024 ABS Scan Tool Bleeding Brake SRS Scanner Car Code Reader Bidirectional Scanner with Airbag Light Reset SAS Oil Light
  • 2024 Top Choice for ABS Bleeder Scan Tool - Is the brake pedal always slowly sinking down or becoming loose? This ABS brake bleeding scan tool will cycle the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with ABS auto bleed. By following the instruction step by step, even a beginner can navigate through easily. Coverage check before purchasing via FOXWELL official site: Support- Diagnostic Coverage List. Tip: It won’t work on vehicles lacking an auto bleed function.
  • More Than a Entry Level OBD2 Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD-II diagnostics to the next level by customizing functions for ABS and SRS system. This SRS and ABS scanner provides in-depth insights on error code diagnosis, wheel speed sensor, airbag circuits, cable connectors monitor, etc... Note: This scanner DOES NOT work on Airbag crash data/programming issues.
  • No More Higher End Service than You Need - One NT630 Plus is enough! This obd2 scanner with ABS and SRS takes in-depth diagnosis on Anti-Lock Brake System & SRS/Airbag, and also performs Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset daily reset services. These issues will be restored after the car faults repaired. Note: Some classic vehicles without the electronic control system can not support the reset service.
  • Also can Work like NT301 - The NT630 Plus ABS code reader can connect to the OBD-II port directly. It will diagnose all OBD-II modules instantly, displays the live data, locates bad sensors and indicate I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
  • Higher-level Services wih Lower Cost - Cost less to own a ABS SRS Bidirectional Scan Tool that is not found on similar code readers & scan tools. This car diagnostic scanner allows you to test all potential car faults in the ABS/Airbag system, with functions returning to normal once you exit the program. Please note, that only ABS/SRS modules are supported.
$169.98 −$51.00 $118.98 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 4
BLCKTEC 430 Bluetooth OBD2 Scanner Diagnostic Tool - Car Code Reader for All Cars OBDII Compatible - Read & Clear Engine, ABS, SRS, Oil Light, & More - Subscription Free OBD App On iOS & Android
BLCKTEC 430 Bluetooth OBD2 Scanner Diagnostic Tool - Car Code Reader for All Cars OBDII Compatible - Read & Clear Engine, ABS, SRS, Oil Light, & More - Subscription Free OBD App On iOS & Android
  • [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
  • [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
  • [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
  • [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor, and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet.
  • [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
$89.99 −$15.00 $74.99 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 5
2024 Newest FOXWELL NT604 OBD2 Scanner ABS SRS, Check Engine Code Reader with Airbag Scanner, Transmission Code Reader Car Diagnostic Tool with Battery Test, English/Spanish Ver，Lifetime Free Update
2024 Newest FOXWELL NT604 OBD2 Scanner ABS SRS, Check Engine Code Reader with Airbag Scanner, Transmission Code Reader Car Diagnostic Tool with Battery Test, English/Spanish Ver，Lifetime Free Update
  • 🔥【Easy to use and friendly】+【Faster diagnostic speed】 FOXWELL NT604 is the 2024 newest enhanced 4 system code reader, which is capable of reading/clearing fault codes, retrieving vehicle information and displaying 4-in-1 live data stream. You will easily find what's wrong with your car to avoid expensive trip to dealership. At the same time, this car scanner will directly tell you what the corresponding code means, avoiding the hassle of searching for information.
  • 🛠【OBD2 Full Function】+【Check Engine/ABS/SRS/Transmission】 This scan tool will allow you to perform full OBDII diagnostic for all cars with OBDII protocols. You can use it to check if your car is ready for annual testing through the I/M Readiness menu. In addition, the device also has value-added functions such as real-time data flow, DTC Lookup, data playback, and printing. Turn off Check Engine/ABS/SRS/Transmission Light. Tips: the fault code can be only erased after the problem is fixed.
  • 🚗【Cover 10000+ models ＆60+ Car Makes】 and 【AUTOVIN】 Compared with Other scanner which only supports 40 car makes, NT604 car diagnostic scanner for all cars contains more than 60 car brands and 10000+ cars for almost all OBDII cars sold worldwide like passenger car, SUVs, minivans, light-duty trucks, etc. produced by Asian, European, American with the supported year differing from 1996 to 2024. It allows you to get your VIN and vehicle info rapidly, no need to take time input one by one.
  • 🛒【Battery Voltage Checker】+【Lifetime Free Update, No Subscription fee 】 It monitors the real-time voltage of the vehicle battery and displays it in graphical and textual form, informing you of the health status of the battery. Also monitor the health of your car. NT604 is equipped with the latest software directly, so you don't need to download a bunch of updated software after unboxing to use it. Lifetime no subscription fee for upgrading software.
  • 🎁【Great festival Idea：Applicable for Many People】+【High End and Exquisite Protective Packaging】 Best one item for Dad, Husband, Boyfriend, Handy Men. Every car owner will need a 4 systems diagnostic scan tool! This code reader fits for home mechanic, DIY car owners, advanced hobbyiest, car dealer, auto repair shop, automotive engineer, diagnostic tech, automobile tech, individual. Apparently, this is the most economical scan tool for every mechanic.
$169.99 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 6
srs%20scan%20tool" title="OBD2 Scanner Code Reader AL600, ABS& SRS Scanner Diagnostic Tool with Active Test, TOPDON Scanner for Car with Oil/BMS/SAS Reset Service, Full OBD2 Functions Automotive Scan Tool, Lifetime Free Update" rel="nofollow noopener sponsored" target="_blank"> OBD2 Scanner Code Reader AL600, ABS& SRS Scanner Diagnostic Tool with Active Test, TOPDON Scanner for Car with Oil/BMS/SAS Reset Service, Full OBD2 Functions Automotive Scan Tool, Lifetime Free Update
OBD2 Scanner Code Reader AL600, ABS& SRS Scanner Diagnostic Tool with Active Test, TOPDON Scanner for Car with Oil/BMS/SAS Reset Service, Full OBD2 Functions Automotive Scan Tool, Lifetime Free Update
  • [ABS & SRS Scanner with Active Test] The ABS/ SRS diagnostic tool Read & clear DTCs, displays live data in a graph to locate the cause of faults and assists the home mechanic with repairs and clearing ABS and airbag warning lights. Active test sensors, valves or solenoids etc. and tracks any threats in real time. It is invaluable to have a diagnostic tool with Active Test feature that you will never find on similar ABS/ SRS scanners.
  • 【3 HOP Reset Services 】Easy to set up 3 regular reset services for Oil Light, Battery Management System, and Steering Angle Position. With this obd2 scanner, you can reset the oil service light and reset pre-programmed mileage intervals for energy efficiency; adjust or reset the steering angle position to keep steering aligned; and clear the original low battery fault information. No need to leave home for shop-quality car maintenance.
  • 【All OBD2 Test Modes 】 This ABS & SRS scan tool is also a full featured obd2 code reader, allowing a quick test of the engine system of OBD II vehicles, can Read/Clear engine light codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Evap Test, Read Vehicle Information, and help pass smog test for most post-1996 OBD2/CAN vehicles.
  • [DTC LookUp Library] Can't read the code? Go to the DTC LookUp Library. The Topdon AL600 OBD2 scanner offers a wealth of code definitions so you don't have to look them up in a list or database, and the HELP function takes you to diagnostic tips for possible fixes, saving time searching for repair materials online. No other scan tool or code reader under $100 offers this level of assistance.
  • [User-Oriented] You'll love the feel of this automotive scanner, with black rubber grips all around the outer edges for durability and to withstand accidental drops. With its easy access menu, you can operate all functions in minutes with just a few button presses. The 3-color LEDs give you a intuitive indication of the OBD2 test results in a second. 3 shortcut keys, one key to read/clear DTCs and a one-touch smoke status check make it easy to use even for beginners.
$99.99 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 7
Autel AutoLink AL619 OBD2 Scanner, ABS SRS Airbag Warning Light Scan Tool, Turn Off Check Engine Light Car Diagnostic Tool, 10 OBDII Test Modes, Live Data, Freeze Frame, 2024 Upgraded of ML619 AL519
Autel AutoLink AL619 OBD2 Scanner, ABS SRS Airbag Warning Light Scan Tool, Turn Off Check Engine Light Car Diagnostic Tool, 10 OBDII Test Modes, Live Data, Freeze Frame, 2024 Upgraded of ML619 AL519
  • 👍【Accurate ABS/SRS Diagnostics Functions】Upgraded from Autel AL519/ML519, Autel AL619 code reader with ABS/SRS diagnostic function is used to retrieve and clear codes from the ABS/SRS systems. It also provides the definition of each code to help diagnose problem areas within the systems that may cause the Malfunction Indicator Light (MIL) to turn on. Diagnoses ABS/ SRS system codes on most 1996 and newer major car models. To get real-time tech support, please email: ❤autelchoice @ outlook . com
  • 👍【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Component Test, Viewing Vehicle Information, Modules Present, DTC Lookup.
  • 👍【Easy to Perform ABSSRS】Please follow these steps to finish ABS/SRS system diagnostic testing procedure: 1. Turn the ignition on but do not start the engine. 2. Turn on the scan tool and wait for the Main Screen to appear. 3. Select AbsSrs icon in the Main Screen. 4. Select a specific vehicle manufacture’s regional coverage. From the vehicle make screen, select a specific vehicle manufacture and press OK button.
  • 👍【Wide Vehicle Coverage】AL619 supports more than 80 US, Asian and European vehicles, including Acura, Audi, Bentley, Benz, BMW, Bugatti, Chrysler, Ford, EU Ford, GM, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Kia, Land Rover, Lexus, Maybach, Mazda, Mini, Mitsubishi, Nissan, Opel, Porsche, Saab, Scion, Seat, Skoda, Smart, Sprinter, Suzuki, Toyota, Vauxhall, Volvo.
  • 👍【Free Life-time Updates & Print Data】Get AL619, it will comes with Free lifetime software update online. You can download the newest software anytime. The Print Data function allows printing out diagnostic data recorded by the scan tool or customized test reports by connecting the scan tool to a PC or laptop with the USB cable supplied.
$109.00 −$10.00 $99.00 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
Airbag Code Reader,Lifetime Free Update" data-aawp-geotargeting="true"> SaleBestseller No. 8
LAUNCH CRP123 OBD2 Scanner-2024 Newest Model Engine/ABS/SRS/Transmission Diagnostic Scan Tool SRS Airbag Code Reader,Lifetime Free Update
LAUNCH CRP123 OBD2 Scanner-2024 Newest Model Engine/ABS/SRS/Transmission Diagnostic Scan Tool SRS Airbag Code Reader,Lifetime Free Update
  • 【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! Also, the lifetime f-ree update is provided for more vehicle coverage, bug fixes. SAVE AT LEAST $1000+ PER YEAR!Get LAUNCH CRP123 Elite car diagnostic scanner and give your lover a surprise!
  • 【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
  • 【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and V-ehicle Information, O2 Sensor Test, EVAP Test of F-uel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 obd2 scanner can not only reveal what error codes your car is producing, but also erase your v-ehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
  • 【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.Large size Color Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
  • 【 Find Your Vehicles Here】Launch CRP123 obd2 scanner Supports mainstream vehicles on the world,fit for ACURA VW AUDI AUST FORD BENZ BMW CHRYSLER FIAT GM HOLDEN HONDA HYUNDAI INFINITI JAGUAR ISUZU KIA LANDROVER LEXUS MAZDA MITSUBISHI NISSAN OPEL PORSCHE SAAB SEAT SKODA SMART MERCEDES SPRINTER SUBARU SUZUKI SCION TOYOTA USA FORD VOLVO PEUGEOT CITROEN RENAULT EUROFORD.Etc.
$170.00 −$63.00 $107.00 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 9
ANCEL FX2000 OBD2 Scanner Diagnostic Tool, ABS SRS Transmission Airbag Car Scanner, Check Engine Car Code Reader, Automotive Scan Tool for All Cars
ANCEL FX2000 OBD2 Scanner Diagnostic Tool, ABS SRS Transmission Airbag Car Scanner, Check Engine Car Code Reader, Automotive Scan Tool for All Cars
  • 💻Note: (About UPDATE) ANCEL FX2000 car scanner diasgnostic tool can be used directly as it comes with existed software, You don't need to register or update beforethe first use. It's recommended to update your scanner with SD card only when it fails to work on your car, or it's slow to load all menus or if you need newer software version. 📢Software update supports WIN XP, 7, 8, 10 operation systems only, but not for Mac and ios system. 📧Any concerns, pls feel free to 𝙚-𝙢𝙖𝙞𝙡 us via 𝙖𝙢𝙖𝙯𝙤𝙣 @ 𝙖𝙣𝙘𝙚𝙡𝙩𝙚𝙘𝙝. 𝙘𝙤𝙢.
  • 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 automotive scanner diagnostic tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use this obd2 scanner with abs and srs to read the data and find out what the fault codes mean.
  • 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 OBD2 scanner diagnostic tool also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
  • 🚙【A/T TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the A/T transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. This transmission scanner provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
  • 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 obd2 scanner with abs and srs is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
$169.99 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 10
OBD2 Scanner TOPDON AL600, ABS SRS Code Reader, Diagnostic Scan Tool, Active Test for ABS/SRS, with Car Maintenance Reset Services of Oil, BMS, SAS
OBD2 Scanner TOPDON AL600, ABS SRS Code Reader, Diagnostic Scan Tool, Active Test for ABS/SRS, with Car Maintenance Reset Services of Oil, BMS, SAS
  • ABS/SRS OBD2 Scanner > Enjoy this ABS SRS OBD2 code reader to reveal exact issues underlying in your brake, airbag, and engine systems, test individual ABS/SRS sensors, valves, or solenoids to quickly locate malfunctions (compatible with GM, Nissan, Fiat, Benz, Volvo, Land Rover, BMW, USA Ford, please reach us for details.), making sure critical safety systems work in perfect harmony together against accidents to be safe than sorry. NOTE: Only support upgrade on windows.
  • 3 Most Needed Service Functions > This TOPDON OBD2 scanner guides you through step by step procedures to reset oil service light and programmed mileage intervals for engine efficiency (Oil Reset); to calibrate steering wheel position for vehicle’s traveling in a straight line (SAS Reset); to clear the original low battery fault information against coming battery failures or damage (BMS Reset); saving your needless visits to mechanics. NOTE: Not suitable for all models, please reach us for compatibility.
  • Full OBD2 Diagnostics > Say goodbye to the hassle of manual check-ups via this srs bi-directional code reader. Quickly correct Check Engine Light warning on most OBD2/CAN compatible vehicles. Easily access to your smog status with one simple click I/M Readiness; and being filled with features for live data readings, freeze frame data, plus EVAP system, onboard monitor test means this scan tool checks all daily car care boxes.
  • Work Easier > Red-Yellow-Green LEDs in this OBD2 diagnostic scanner TOPDON Arilink600 quickly show the overall DTC status without toggling through menu selections. HELP hotkey takes you directly to detailed descriptions/tips. Read/Erase DTC, I/M readiness shortcuts are added for optimized operation, along with DTC Lookup library for interpreting codes, designing the SRS OBD2 reader diagnostic tool a pleasure to use right out of the package even for beginners.
  • Helpful Service > Get instant, free lifetime access to the most recent updates to add new car models and troubleshooting bugs making the OBD2 scanner TOPDON AL600 a long-term investment for any home mechanics. The extended 1 years of quality assurance sweetens the worry-free deal even further. Multilingual Menu: EN, FR, ES, DE, IT, RU, PT, and JP. NOTE: Only support upgrade on windows.
$129.99 −$30.00 $99.99 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping

Last update on 2024-06-13 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 

BufferCopyFlipboardHacker NewsLinkedInMessengerMixPinterestPocketPrintRedditSMSTelegramTumblrVKWhatsAppLineXing

Leave a Comment

Share to...
BufferCopyFlipboardHacker NewsLineLinkedInMessengerMixPinterestPocketPrintRedditSMSTelegramTumblrVKWhatsAppXing