| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V279
Manufacturer Chrysler (FCA US LLC)
Components SUSPENSION
Potential Number of Units Affected 2,761
If the lower control arm separates, it can cause a loss of vehicle control, increasing the risk of a crash.
Summary
Chrysler (FCA US LLC) is recalling certain 2018 Jeep Compass vehicles. The front lower control arms may be incorrectly welded, potentially resulting in a control arm separation.
Remedy
Chrysler will notify owners, and dealers will inspect and, if necessary, replace the front lower control arms, free of charge. The recall is expected to begin June 20, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler’s number for this recall is U42.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
Advanced Communication
05/08/2018
https://static.nhtsa.gov/odi/rcl/2018/RCMN-18V279-0552.pdf
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
May 21, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V279-1934.pdf
Loading...
SaleBestseller No. 1
ARCCAPTAIN 130A MIG Welder, 110V Flux Core MIG Welder/Lift TIG/Stick 3 in 1 Welding Machine with Synergy, IGBT Inverter Portable Gasless Welder Equipment with Welding Gun and 2lb Welding Wire
- SYNERGIC CONTROL: The recommend current and wire feeding speed will be automatically matched after selected diameter of the welding wire(you can choose .030”/.035”/.040" flux core wire). The MIG welder is easier for beginners or those that are learning to weld and want to make small repairs around the house. 1 Free Flux Core Wire .030".
- 3-IN-1 WELDER: 3 welding modes Flux Core Gasless MIG/ Lift TIG/ MMA meet your different requirements (Need to buy extra Lift tig torch). Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of carbon steel, stainless or even thicker steel, Ideal for home DIY, outdoor repairs, rusty metal, farm and road equipment, and maintenance and repairs.
- SAFETY PROTECTION: The welder comes with an attached MIG torch and power cable, you can weld after unpacking the box, it’s convenient to use. Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine.
- PORTABLE AND COMPACT: The machine weighs only 11.79 pounds, and you can freely carry it anywhere with a handle or shoulder strap. Package includes 1* MIG130 Welder, 1* MIG Torch, 1*Ground Clamp, 1* Electronic Holder, 1* .030"/2lb Flux Cored Wire,1* 0.8/.030" conductive Nozzle,1* 0.9/.035" conductive Nozzle,1* Brush&Hammer,1* User Manual.
- WARM SERVICE & 2-YEAR WARRANTY: 30-Day Money Back Guarantee and 2-Year Warranty. Ideal for fathers day gifts. Every single of our welder machines passed various authoritative Laboratory tests in simulating extremely harsh environments before leaving our ARCCAPTAIN factory that conforms to the high standards.
Bestseller No. 2
YESWELDER 135Amp MIG Welder,110V Flux Core Welder Flux MIG/Lift TIG/Stick 3-in-1 Large LED Digital Display Welding Machine IGBT Inverter Welder FLUX-135PRO
- [MORE POWERFUL] Up to 135 Amp output allows you to weld mild steel up to 2/5” in the plate. Suitable for 2LB .030” & .035” flux core wire.
- [MULTI-PROCESS] 3-in-1 Welder, capable of Gasless MIG/Stick/Lift TIG. (need to buy an extra lift TIG torch) Meets your various welding needs.
- [DIGITAL DISPLAY] Advanced digital display, increases the visual clarity and improves the efficiency of the operation.
- [SYNERGIC CONTROL] When adjusting the wire feeding speed, the voltage will be automatically matched. Suitable for beginners and professionals.
- [SAFETY FIRST] Automatic compensation for voltage fluctuation, over current protection, over load protection.
Bestseller No. 3
Lincoln Electric 90i MIG and Flux Core Wire Feed Weld-PAK Welder, 120V Welding Machine, Portable w/Shoulder Strap, Protective Metal Case, Best for Small Jobs, K5256-1
- WELD ANYWHERE: Plug in the Weld-Pak 90i MIG wire feed welder anywhere 120V input power is available; It's designed to use with flux-cored welding wire (1/4” max thickness) or solid MIG wire (3/16" max thickness)
- ACCESSORIES INCLUDED: The machine comes with a full list of accessories including a welding gun, nozzle, contact tip, work cable and clamp; Metal case provides protection from the elements
- LIGHT & PORTABLE: Ideal for maintenance and mobile welders, thanks to its small and lightweight (15 lbs) inverter design and shoulder strap for portability; A good choice for professionals but it’s an easy to use welder for beginners too
- SMOOTH & EASY OPERATION: Has simple control with two knobs for wire speed and voltage; Inverter power source makes it more efficient to operate and provides smoother weld characteristics compared to traditional welders
- PERFECT FOR SMALL WELD JOBS: This machine is best for DIY projects, hobbyists, home repairs and more; Infinite welding voltage allows fine-tuning of weld characteristics
SaleBestseller No. 4
AZZUNO MIG Welder,Flux Core Welder Machine 110V 130Amp, Gasless MIG Welding Machine IGBT Inverter Welder Portable Wire Feed Welder (110V)
- 【EASY TO USE】: The welding machine has included with voltage control knob,wire speed adjustment knob and with synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. Even beginners can use it easily.
- 【POWERFUL AND SAGE WELDER MACHINE】: This 130A Welding machine can weld mild up to 3.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.Big enough to handle 2.2 pound rolls of wire.
- 【PORTABLE DESIGN】: Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want; It only weighs 8.6 lbs., so you can effortlessly take it as far as you can.
- 【WIDE APPLICATIONS】: It can be used with a wide variety of metals and alloys. Suitable for home users, DIY craft enthusiasts, beginners and small projects.
- 【PACKAGE INCLUDES】: 130 MIG welding machine; Mig torch; Ground clamp; Brush&Hammer; 1lb .030" flux cored welding wire; Contact Tip*2.
SaleBestseller No. 5
AZZUNO 200A MIG Welder,110V/220V Dual Voltage multiprocess welder,Gas Gasless MIG Welding Machine,4 in 1 Flux MIG/Solid Wire/Lift TIG/Stick ARC Welder (Grey)
- 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose.
- Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it.
- Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 8.0mm.
- Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 1.0MM-8.0MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E6013.
- Powerful And Safe Machine:This 200A Welding machine can weld mild up to 8.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.
Bestseller No. 6
S7 200Amp MIG Welder,110V&220V 4 in 1 MIG&ARC&Lift TIG Gas/Gasless Inverter Multi-Process Dual Voltage Welding Machine
- 🛡️★Multi-Function Welding Machine: IGBT Full 20-200Amp(Max) with Digital Display for reliable quality and stable performance. Suitable for MMA, Lift TIG, Flux MIG, and Gas MIG. Big enough to handle 2 to 5 pound rolls of wire.
- 🛡️★Powerful Welding Capability: Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0mm) Plate.MAX 5 Pound Rolls Of Wire.030"(0.8mm) With Solid Core Wire, And .035" (0.9mm)With Flux Core Wire.Can Handle E7018 Basic Electrode
- 🛡️★Complete Welding Kit: Includes MIG Gun(2.8M), Ground Clamp and Holder (2M), 220V to 110V Adapter, Drive Roller Wheel, Contact Tips, Gass Nozzles, and Welder Operation Manual. Processes recommended for MIG-Cast Iron, Copper, Brass, Titanium, Magnesium Alloys. Flux Cored- Aluminium, Cast Iron, Copper, Brass, Titanium.
- 🛡️★Intuitive Synergic Design: Synergic Control with automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. The MIG-200 is capable of true lift TIG (TIG Lift Torch not included) welding as well as stick welding.
- 🛡️★Safety Features: Automatic protection function for over-current, over-voltage, and over-heating.
Bestseller No. 7
Lincoln Electric Power MIG 211i MIG Welder K6080-1
- Simple user interface - Seven segment display with basic knob controls.
- Process Capabilities - MIG, Flux-Cored and Spool Gun.
- Dual Input Voltage - 120V and 230V inputs so you can plug into any common power supply.
- Ergonomic Case - Sleek and robust case design with multiple lift points for ease of mobility around the shop.
- Lightweight and Portable - Only 41 lbs
SaleBestseller No. 8
TOOLIOM 200M MIG Welder 3 in 1 Flux MIG/Solid Wire/Lift TIG/Stick Welder 110 / 220V Dual Voltage Welding Machine
- Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
- Multi-functions in one machine: Suitable for stick, lift TIG(torch is not included), flux MIG, gas MIG
- Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate.
- Big enough to apply to 2 and 10 pounds rolls of wire. Ready to feed .030"(0.8mm) with solid core wire, and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode.
- Dual voltage input design: Welding machine can be plugged into 110（120）V / 220(230)V dual voltage (Automatic fitting).
Bestseller No. 9
SSIMDER MIG Welder 140A 2 in 1 Stick/Flux Core Welder 110V/220v Dual Voltage Welding Machine with Flux Cored Wire MIG/ARC Welder IGBT Inverter Welder
- 【2 in 1 Stick/MIG Welder】Get the best of both worlds with this versatile welding machine that supports both MIG and ARC welding. It delivers up to 145Amp DC output and is designed for dual voltage operation, compatible with 110v/220v input. Whether you need to weld thick steel plates or thin sheet metal, this welder is up for the job.
- 【Beginner-Friendly and Efficient】This MIG welder is perfect for beginners who are looking for an easy-to-use welding machine. With its Synergic mode, the voltage is automatically adjusted by regulating the current, making it incredibly easy to operate and start. Plus, its advanced IGBT & Inverter technology ensures efficient and portable welding, so you can take it anywhere you need to weld.
- 【Easy to operate】The flux core welding machine is a super easy to operate 2-in-1 welder that can effectively handle iron and carbon steel welding tasks with flux cored wire sizes of 0.030" and 0.035", you can set the current range according to the thickness and characteristics of the material, and an ARC mode that supports welding of E7018 and E6013 electrodes.
- 【Versatile Welding for Various Applications】Our MIG welder can weld iron, carbon, steel, and other materials, making it an excellent choice for household welding, DIY projects on steel, and other welding applications that require a MIG welder. With its multi-application capabilities, you can use it for welding, fabrication, repair, and more.
- 【Complete Welding Kit for Easy Use】In addition to the MIG welder, this package includes a MIG Torch, Electrode holder, Ground clamp, 110v/220v adapter, and other accessories, making it easy to use and get started with welding. With everything you need to start welding, you can save time and money by avoiding the need to purchase additional accessories separately.
Bestseller No. 10
Agilworx 135A MIG Welder, 110V Flux Core MIG/Lift TIG/Stick 3-in-1 Welding Machine IGBT Inverter Portable Welder Equipment with Welding Helmet, Welding Gloves & 2lb Welding Wire
- 【POWERFUL 3-IN-1 WELDER】Composed with Flux MIG, Lift TIG and Stick/MMA. Our powerful 3-in-1 welding machine meets your requirement for different welding situations like home DIY, outdoor maintenance and repairs, etc. (NOTE: the lift tig torch is not included)
- 【SYNERGIC CONTROL】Equipped with precise data, this flux core welder will automatically match the most suitable voltage, wire feeding speed by adjusting amperage, which is quite friendly for both professional welding worker and beginner. You can also adjust machine parameters by manually In order to best suit for your demand.
- 【SAFE & INTELLIGENT】Our MIG welder features overheat and overload protection will automatically shut off while overheated, and the built-in fan will consistently cool down your welder for 1-2 mins after shutdown. Additionally, the intelligent IGBT technology helps the welder reduce energy loss and works more efficiently.
- 【LIGHTWEIGHT & DURABLE】Item Dimensions: 13.6(L) x 6.6(W) x 11.15(H) inches, welder machine weight: 10.14lbs. This lightweight 135amp stick welder designed with two portable handles, allows you to take it anywhere, and you can add a shoulder belt by your own if need. Besides, IP21 water rating better protect your welder and extend its service life.
- 【SET INCLUDES】To spend you less money and bring you more convenience, our 3-in-1 welder set includes a solar powered auto darkening welding helmet (viewing size: 3.66"x1.69"), a pair of 932°F/500℃ heat resistant leather welding gloves and a roll of E71T-GS .030" 2lb flux core welding wire.
Last update on 2024-03-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.