Safety Recall W00 – Shift Cable – 2014-2019 Ram ProMaster

“This site contains affiliate links for which OEMDTC may be compensated”

January 23, 2020 NHTSA CAMPAIGN NUMBER: 20V036000

Shifter Cable May Disconnect from Transmission

The driver may be unaware of the actual gear position and unintended vehicle movement can occur, increasing the risk of a crash.

 

NHTSA Campaign Number: 20V036

Manufacturer Chrysler (FCA US LLC)

Components POWER TRAIN

Potential Number of Units Affected 222,207

 

Summary

Chrysler (FCA US LLC) is recalling certain 2014-2019 Ram ProMaster vehicles equipped 3.6L engines. The transmission shifter cable may separate and disconnect from the transmission, causing the vehicle to not perform shifts intended by the driver and the gear shift lever position not matching the actual transmission gear.

 

Remedy

Chrysler will notify owners, and dealers will replace the transmission shift cable, free of charge. The recall began May 26, 2020. Owners may contact Ram Trucks at 1-866-726-4636. Chrysler’s number for this recall is W00.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Vehicle has a Recall

 


This notice applies to your vehicle,

[Model Year and Model]

VIN XXXXXXXXXXXXXXXXX

W00/NHTSA 20V-036

LOGO

VEHICLE PICTURE

YOUR SCHEDULING OPTIONS

  1. Visit mopar.com to sign up for email or SMS notifications for when remedy parts become available. You will be asked to provide your Vehicle Identification Number (VIN), provided above
  2. Scan below using your smartphone or tablet to sign up to be notified when remedy parts become available
  1. Wait for FCA US to contact you again, by mail, with a follow-up recall notice when remedy parts are available
  2. Call the FCA Recall Assistance Center at 1-800-853-1403. An agent can sign you up to be notified when remedy parts become available, or answer any other questions you may have

DEALERSHIP INSTRUCTIONS

Please reference Safety Recall W00.

IMPORTANT SAFETY RECALL

Shift Cable

Dear [Name],

This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.

FCA US has decided that a defect, which relates to motor vehicle safety, exists in certain [2014-2019 RAM ProMaster] vehicles.

 

WHY DOES MY VEHICLE NEED REPAIRS?

The transmission shifter cable on your vehicle [1] could separate, disconnecting the transmission shifter from the transmission, which could result in the inability of the driver to shift the transmission potentially resulting in the gear shift lever position not matching the transmission gear.

If the transmission shifter becomes disconnected from the transmission, the vehicle may not perform the shifts intended by the driver (including a shift to PARK), although the actual transmission gear position will be displayed on the instrument cluster. In addition, the “Vehicle Not in PARK” and the “Door Ajar” messages will display on the instrument cluster and audible chimes will sound if the driver’s door is opened while the transmission is not in PARK. If these warnings are not heeded, unintended vehicle movement may occur which can cause a vehicle crash without prior warning and/or injury to others outside the vehicle.

There will not be any prior warning of the transmission shifter cable disconnection from the transmission. However, after the cable detachment and prior to a driver attempting to exit a vehicle, the driver may notice significantly reduced effort required to move the shift lever, the gear position indicators in the vehicle will all show the actual gear of the transmission regardless of the shift lever position, and the door ajar warning will also function which alerts the driver via instrument cluster messages and audible chime if the driver’s door is opened while the transmission is not in PARK.

 

HOW DO I RESOLVE THIS IMPORTANT SAFETY ISSUE?

The remedy for this condition is not currently available. We are making every effort to finalize the remedy as quickly as possible, and will service your vehicle free of charge (parts and labor).

FCA US will contact you again, by mail, with a follow-up recall notice when the remedy is available. Once you receive your follow-up notice, simply contact your Chrysler, Jeep®, Dodge or RAM dealer right away to schedule a service appointment [2]. Additional options for your next steps are included on the left side of this notification. We appreciate your patience.

 

WHAT IF I ALREADY PAID TO HAVE THIS REPAIR COMPLETED?

If you have already experienced this specific condition and have paid to have it repaired, you may visit www.fcarecallreimbursement.com to submit your reimbursement request online [3]. Once we receive and verify the required documents, reimbursement will be sent to you within 60 days. If you have had previous repairs performed and/or already received reimbursement, you may still need to have the recall repair performed.

We apologize for any inconvenience, but are sincerely concerned about your safety. Thank you for your attention to this important matter.

Customer Assistance/Field Operations  FCA US LLC


Mr. Mrs. Customer
1234 Main Street
Hometown, MI 48371

[1] If you no longer own this vehicle, please help us update our records. Call the FCA Recall Assistance Center at 1-800-853-1403 to update your information.

[2] If your dealer fails or is unable to remedy this defect without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC 20590, or you can call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to safercar.gov.

[3] You can also mail in your original receipts and proof of payment to the following address for reimbursement consideration: FCA Customer Assistance, P.O. Box 218004, Auburn Hills, MI 48321-8007, Attention: Recall Reimbursement.

Note to lessors receiving this recall notice: Federal regulation requires that you forward this recall notice to the lessee within 10 days.

 


May 2020

Dealer Service Instructions for:

Safety Recall W00 / NHTSA 20V-036 Shifter Cable

 

Remedy Available

2014-2019 (VF) Ram ProMaster

 

NOTE: ProMaster repairs can only be performed by BusinessLink Dealers. Non BusinessLink Dealers should not order parts or perform the repair.  

NOTE:  This recall applies only to the above vehicles equipped with an automatic transmission.

NOTE:  Some vehicles above may have been identified as not involved in this recall and therefore have been excluded from this recall.

 

IMPORTANT:  Some of the involved vehicles may be in dealer new vehicle inventory.  Federal law requires you to complete this recall service on these vehicles before retail delivery.  Dealers should also consider this requirement to apply to used vehicle inventory and should perform this recall on vehicles in for service.  Involved vehicles can be determined by using the VIP inquiry process.

 

Subject

The transmission shifter cable on about 222,200 vehicles could separate, disconnecting the transmission shifter from the transmission, which could result in the inability of the driver to shift the transmission potentially resulting in the gear shift lever position not matching the transmission gear.

 

If the transmission shifter becomes disconnected from the transmission, the vehicle may not perform the shifts intended by the driver (including a shift to PARK), although the actual transmission gear position will be displayed on the instrument cluster. In addition, the “Vehicle Not in PARK” and the “Door Ajar” messages will display on the instrument cluster and audible chimes will sound if the driver’s door is opened while the transmission is not in PARK. If these warnings are not heeded, unintended vehicle movement may occur which can cause a vehicle crash without prior warning and/or injury to others outside the vehicle.

 

There will not be any prior warning of the transmission shifter cable disconnection from the transmission. However, after the cable detachment and prior to a driver attempting to exit a vehicle, the driver may notice significantly reduced effort required to move the shift lever, the gear position indicators in the vehicle will all show the actual gear of the transmission regardless of the shift lever position, and the door ajar warning will also function which alerts the driver via instrument cluster messages and audible chime if the driver’s door is opened while the transmission is not in PARK.

 

Repair

Replace the automatic transmission shifter cable.

 

Alternate Transportation

Dealers should attempt to minimize customer inconvenience by placing the owner in a loaner vehicle if the vehicle must be held overnight.

 

Parts Information

NOTE:  ProMaster repairs can only be performed by BusinessLink Dealers.  Non BusinessLink Dealers should not order parts or perform the repair.  

 

Description Part Number
Shifter Cable Kit CSRKW001AA
Each package contains the following components:
Description Quantity
Shifter Cable 1

 

Parts Return

No parts return required for this campaign.

 

Special Tools

No special tools are required to perform this service procedure.

 

Service Procedure

A. Remove

 

NOTE:  To enhance customer satisfaction, remember to reset the clock when you have completed the service procedure.

 

NOTE:  The shift lever should be placed in Park to begin this procedure, and left in Park until the repair is completed.

  

  1. Park the vehicle on level ground and set the parking brake.

 

  1. Rotate the quarter-turn fasteners retaining the battery cover to the driver’s floor area (Figure 1). Remove the cover.

 

  1. Disconnect the negative battery cable.

 

  1. Using a trim stick, remove the trim covers and screws behind them that retain the cup holder assembly to the center instrument panel (Figure 2).

 

  1. Using a trim   stick, remove the cup holder assembly (Figure 3).

 

  1. Remove the cup holder trim panel fasteners (Figure 4).

 

  1. Remove the cup holder trim panel.

 

  1. Remove the cup holder mounting bracket fasteners and mounting bracket (Figure 5).

 

  1. Disconnect the shifter cable from the shifter (Figure 6).

 

  1. Separate the shifter cable assembly from the shifter housing by pressing on the release lever while sliding the cable assembly away from housing (Figure 7).

 

  1. From inside the vehicle, remove the four fasteners retaining the grommet to the bulkhead (Figure 8).

 

  1. Disconnect the shifter cable from the transaxle manual valve lever (Figure 9).

 

NOTE:  Observe the location of the transaxle manual valve lever. Ensure that the lever does not move during this procedure.

 

  1. Release the shifter cable from the bracket at the transmission (Figure 10).

 

  1. Open the retainer at the bulkhead and remove the shifter cable (Figure 11).

 

  1. Pull the shifter cable through the bulkhead into the passenger compartment.

 

B.  Install

 

CAUTION: Handle the new cable carefully. Avoid sharply bending the cable. Avoid pulling or pushing excessively on the cable, particularly at the ends.

Damaging or sharply bending the cable can cause premature cable failure.

 

  1. Carefully install the new shifter cable through the bulkhead from the passenger compartment.

 

  1. Seat the grommet onto the bulkhead. Install the four fasteners. Tighten the nuts to 6 N·m (53 in. lbs.)  (Figure 12).

 

  1. Install the shifter cable to the retainer at the bulkhead and secure the retainer (Figure 13).

 

  1. Connect the shifter cable to the bracket at the transmission (Figure 14).

 

  1. Remove the shipping clip from the new cable (Figure 15).

 

  1. Connect the shifter cable from the transaxle manual valve lever and lock the adjuster (Figure 16).

 

NOTE:  Observe the location of the transaxle manual valve lever. Ensure that the lever does not move during this procedure.

 

  1. From inside the vehicle, attach the shifter cable assembly to the shifter housing. An audible “click” should be heard when the locking tab engages the housing (Figure 17).

 

NOTE: Double check the connection in Install Step 7. Sometimes the cable does not embed correctly into the bracket. An audible click should be heard when the cable locks into the bracket.

 

  1. Install the shifter cable to the shifter. Make sure the lock tab on the shifter cable is fully seated (Figure 18).

 

  1. Install the cup holder mounting bracket fasteners (Figure 19).

 

  1. Install the cup holder trim panel.

 

  1. Install the cup holder trim panel fasteners (Figure 20).

 

  1. Install the cup holder (Figure 21).

 

  1. Install the screws and trim covers that retain the cup holder assembly to the center instrument panel (Figure 22).

 

  1. Connect the negative cable at the battery.

 

  1. Install the battery cover. Rotate the quarter-turn fasteners retaining the battery cover to the driver’s floor area (Figure 23).

 

NOTE:  Perform the shifter cable adjustment procedure and verification below to ensure the shifter cable is properly adjusted.

 

Adjustment and Verification

 

  1. Park the vehicle on level ground and set the parking brake.

 

  1. Place the gearshift lever in gated park (P) and remove the ignition key.

 

  1. Release the cable adjustment cross-lock on the shifter cable by pulling up on the crosslock (Figure 24).

 

  1. Pull the manual valve lever fully forward to the park detent position.

 

  1. Release the parking brake, then rock the vehicle to assure it is in park. Reset the parking brake.

 

  1. Lock the cable adjustment by pushing the cross-lock down. The cable should now be properly adjusted.

 

  1. Verify the adjustment by using the verification procedure in the following steps.

 

  1. Confirm that the gearshift lever is in the gated park (P) position.

 

  1. Attempt to move the vehicle by rocking it back and forth on level ground. If the vehicle does not move, attempt to start the engine. If the engine starts, the park position is correct.

 

  1. Set the parking brake.

 

  1. Turn the key to the on/run position and depress brake pedal. Place the gearshift lever in neutral (N).

 

  1. Attempt to start the engine. If the engine starts in both neutral (N) and park (P), the shifter cable is adjusted properly. No adjustment is required.

 

  1. If the engine does not start in either the park (P) or neutral (N), perform the adjustment procedure.

 

  1. Release the parking brake. Close the hood and return the vehicle to the customer.

 

Completion Reporting and Reimbursement

Claims for vehicles that have been serviced must be submitted on the DealerCONNECT Claim Entry Screen located on the Service tab.  Claims paid will be used by FCA to record recall service completions and provide dealer payments.

Use the following labor operation numbers and time allowances:

Labor Operation
Number         
Time
Allowance
Replace Shifter Cable 21-W0-01-82 0.5 hours
Floor Plan Reimbursement 95-95-95-97 Calculate See Below

 

Add the cost of the recall parts package plus applicable dealer allowance to your claim.

 

Floor Plan Reimbursement represents the vehicle’s average daily allowance (see table below) multiplied by the number of days the vehicle was in dealer inventory and not available for sale.  This reimbursement is limited to the number of days from the date of the stop sale to the date that the remedy was made available.  Note:  If the vehicle was received by your dealership (KZX date) AFTER the stop sale date, you will use the KZX date instead of the stop sale date.  For this Recall, the stop sale was initiated on 01/30/2020 and the remedy was made available on 05/19/2020, therefore, the number of days cannot exceed 111 days.

 

Vehicle Average Daily Allowance
2014-2019 (VF) Ram ProMaster  

 

NOTE:  See the Warranty Administration Manual, Recall Claim Processing Section, for complete recall claim processing instructions.

 

Dealer Notification

To view this notification on DealerCONNECT, select “Global Recall System” on the Service tab, then click on the description of this notification.

 

Owner Notification and Service Scheduling

All involved vehicle owners known to FCA are being notified of the service requirement by first class mail.  They are requested to schedule appointments for this service with their dealers.  A generic copy of the owner letter is attached.

 

Vehicle Lists, Global Recall System, VIP and Dealer Follow Up

All involved vehicles have been entered into the DealerCONNECT Global Recall System (GRS) and Vehicle Information Plus (VIP) for dealer inquiry as needed.

 

GRS provides involved dealers with an updated VIN list of their incomplete vehicles.  The owner’s name, address and phone number are listed if known.  Completed vehicles are removed from GRS within several days of repair claim submission.

 

To use this system, click on the “Service” tab and then click on “Global Recall System.”  Your dealer’s VIN list for each recall displayed can be sorted by: those vehicles that were unsold at recall launch, those with a phone number, city, zip code, or VIN sequence.

 

Dealers must perform this repair on all unsold vehicles before retail delivery. Dealers should also use the VIN list to follow up with all owners to schedule appointments for this repair.

Recall VIN lists may contain confidential, restricted owner name and address information that was obtained from the Department of Motor Vehicles of various states.  Use of this information is permitted for this recall only and is strictly prohibited from all other use.

 

Additional Information

If you have any questions or need assistance in completing this action, please contact your Service and Parts District Manager.

Customer Services / Field Operations

FCA US LLC

 


This notice applies to your vehicle,

 [Model Year and Model]  VIN XXXXXXXXXXXXXXXXX W00/NHTSA 20V-036

 

LOGO

VEHICLE PICTURE

YOUR SCHEDULING OPTIONS

 

  1. RECOMMENDED OPTION Call your authorized BusinessLink dealer.

 

  1. Call the FCA Recall Assistance Center at 1-800-853-1403. An agent can confirm part availability and help schedule an appointment

 

  1. Visit recalls.mopar.com, scan the QR code below, or download the Mopar Owner’s Companion App.

 

QR Code

 

Get access to recall notifications, locate your nearest dealer, and more through this website or Mopar Owner’s Companion App. You will be asked to provide your Vehicle Identification Number (VIN) to protect and verify your identity. The last eight characters of your VIN are provided above.

 

DEALERSHIP INSTRUCTIONS

Please reference Safety Recall W00.

 


IMPORTANT SAFETY RECALL

Shifter Cable

Dear [Name],

 

This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.

 

FCA US has decided that a defect, which relates to motor vehicle safety, exists in certain [20142019 RAM ProMaster] vehicles.

 

It is extremely important to take steps now to repair your vehicle to ensure the safety of you and your passengers.

 

WHY DOES MY VEHICLE NEED REPAIRS?

The transmission shifter cable on your vehicle [1] could separate, disconnecting the transmission shifter from the transmission, which could result in the inability of the driver to shift the transmission potentially resulting in the gear shift lever position not matching the transmission gear.

 

If the transmission shifter becomes disconnected from the transmission, the vehicle may not perform the shifts intended by the driver (including a shift to PARK), although the actual transmission gear position will be displayed on the instrument cluster. In addition, the “Vehicle Not in PARK” and the “Door Ajar” messages will display on the instrument cluster and audible chimes will sound if the driver’s door is opened while the transmission is not in PARK. If these warnings are not heeded, unintended vehicle movement may occur which can cause a vehicle crash without prior warning and/or injury to others outside the vehicle.

 

There will not be any prior warning of the transmission shifter cable disconnection from the transmission. However, after the cable detachment and prior to a driver attempting to exit a vehicle, the driver may notice significantly reduced effort required to move the shift lever, the gear position indicators in the vehicle will all show the actual gear of the transmission regardless of the shift lever position, and the door ajar warning will also function which alerts the driver via instrument cluster messages and audible chime if the driver’s door is opened while the transmission is not in PARK.

 

HOW DO I RESOLVE THIS IMPORTANT SAFETY ISSUE?

FCA US will repair your vehicle [2] free of charge (parts and labor).  To do this, your BusinessLink dealer will replace the shift cable. The estimated repair time is one hour. In addition, your BusinessLink dealer will require your vehicle for proper check-in, preparation, and check-out during your visit, which may require more time. Your time is important to us, so we recommend that you schedule a service appointment to minimize your inconvenience. Please bring this letter with you to your BusinessLink dealership.

 

TO SCHEDULE YOUR FREE REPAIR,
CALL YOUR BUSINESSLINK DEALER TODAY

 

WHAT IF I ALREADY PAID TO HAVE THIS REPAIR COMPLETED?

If you have already experienced this specific condition and have paid to have it repaired, you may visit www.fcarecallreimbursement.com to submit your reimbursement request online. [3] Once we receive and verify the required documents, reimbursement will be sent to you within 60 days.  If you have had previous repairs performed and/or already received reimbursement, you may still need to have the recall repair performed.

 

 

We apologize for any inconvenience, but are sincerely concerned about your safety.  Thank you for your attention to this important matter.

 

Customer Assistance/Field Operations

FCA US LLC

 


Mr. Mrs. Customer

1234 Main Street

Hometown, MI 48371

[1] If you no longer own this vehicle, please help us update our records. Call the FCA Recall Assistance Center at 1-800-853-1403 to update your information.

[2] If your dealer fails or is unable to remedy this defect without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC  20590, or you can call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-4249153), or go to safercar.gov.

[3] You can also mail in your original receipts and proof of payment to the following address for reimbursement consideration: FCA Customer Assistance, P.O. Box 21-8004, Auburn Hills, MI 48321-8007, Attention: Recall Reimbursement.

 

Note to lessors receiving this recall notice: Federal regulation requires that you forward this recall notice to the lessee within 10 days.

 


01/24/2020

New Safety Recall Advanced Communication – W00

 

FCA US LLC (FCA US) has announced a safety recall on certain 2014 through 2019 Model Year (VF) RAM ProMaster vehicles equipped with a 3.6L engine and automatic transmission.

 

REASON FOR THIS SAFETY RECALL

The transmission shifter cable could separate, disconnecting the transmission shifter from the transmission, which could result in the inability of the driver to shift the transmission potentially resulting in the gear shift lever position not matching the transmission gear.

 

If the transmission shifter becomes disconnected from the transmission, the vehicle may not perform the shifts intended by the driver (including a shift to PARK), although the actual transmission gear position will be displayed on the instrument cluster. In addition, the “Vehicle Not in PARK” and the “Door Ajar” messages will display on the instrument cluster and audible chimes will sound if the driver’s door is opened while the transmission is not in PARK. If these warnings are not heeded, unintended vehicle movement may occur which can cause a vehicle crash without prior warning and/or injury to others outside the vehicle.

 

There will not be any prior warning of the transmission shifter cable disconnection from the transmission. However, after the cable detachment and prior to a driver attempting to exit a vehicle, the driver may notice significantly reduced effort required to move the shift lever, the gear position indicators in the vehicle will all show the actual gear of the transmission regardless of the shift lever position, and the door ajar warning will also function which alerts the driver via instrument cluster messages and audible chime if the driver’s door is opened while the transmission is not in PARK.

 

SERVICE ACTION 

FCA US will conduct a voluntary safety recall to replace the transmission shift cable. The remedy for this condition is not currently available. Dealers will be notified of the launch of this safety recall by way of established communication methods. This recall is estimated to launch in 1st Quarter of 2020.

 

We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries regarding involved vehicles.

 

Customer Services Field Operations

FCA US LLC

 


01/30/2020

New Safety Recall Advanced Communication – W00

 

FCA US LLC (FCA US) has announced a safety recall on certain 2014 through 2019 Model Year (VF) Ram ProMaster vehicles equipped with a 3.6L engine and automatic transmission.

 

VINs identified as being involved in this campaign are currently live and searchable. Stop sale is in effect for the above-identified vehicles.

 

Vehicles impacted by a stop sale are eligible for reimbursement allowance through the Recall Floorplan Reimbursement Policy (RFPRP), which can be requested upon recall claim submission.

 

IMPORTANT:  Some of the involved vehicles may be in dealer new vehicle inventory.  Federal law requires you to complete this recall service on these vehicles before retail delivery.  Violation of this requirement by a dealer could result in a civil penalty of up to $21,000 per vehicle.  Involved vehicles can be determined by using the VIP inquiry process.

 

REASON FOR THIS SAFETY RECALL 

The transmission shifter cable could separate, disconnecting the transmission shifter from the transmission, which could result in the inability of the driver to shift the transmission potentially resulting in the gear shift lever position not matching the transmission gear.

 

If the transmission shifter becomes disconnected from the transmission, the vehicle may not perform the shifts intended by the driver (including a shift to PARK), although the actual transmission gear position will be displayed on the instrument cluster. In addition, the “Vehicle Not in PARK” and the “Door Ajar” messages will display on the instrument cluster and audible chimes will sound if the driver’s door is opened while the transmission is not in PARK. If these warnings are not heeded, unintended vehicle movement may occur which can cause a vehicle crash without prior warning and/or injury to others outside the vehicle.

 

There will not be any prior warning of the transmission shifter cable disconnection from the transmission. However, after the cable detachment and prior to a driver attempting to exit a vehicle, the driver may notice significantly reduced effort required to move the shift lever, the gear position indicators in the vehicle will all show the actual gear of the transmission regardless of the shift lever position, and the door ajar warning will also function which alerts the driver via instrument cluster messages and audible chime if the driver’s door is opened while the transmission is not in PARK.

 

SERVICE ACTION 

FCA US will conduct a voluntary safety recall to replace the transmission shift cable. The remedy for this condition is not currently available. Dealers will be notified of the launch of this safety recall by way of established communication methods.

 

We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries regarding involved vehicles.

 

Customer Services Field Operations

FCA US LLC

 


6 Affected Products

Vehicle

MAKE MODEL YEAR
RAM PROMASTER 2014-2019

 


14 Associated Documents

ISSUED Owner Notification Letter(Part 577)

RCONL-20V036-2703.pdf 519.86KB

RCONL-20V036-2703

 


Manufacturer Notices(to Dealers,etc) – Safety Bulletin re FCA US LLC (FCA US) has announced a safety recall on certain 2014 through 2019 Model Year (VF) RAM ProMaster vehicles equipped with a 3.6L engine and automatic transmission.

RCMN-20V036-9604.pdf 97.53KB

RCMN-20V036-9604

 


Recall 573 Report

RCLRPT-20V036-6925.PDF 215.246KB

RCLRPT-20V036-6925

 


ISSUED Owner Notification Letter(Part 577)

RCONL-20V036-2963.pdf 520.008KB

RCONL-20V036-2963

 


Remedy Instructions and TSB

RCRIT-20V036-4978.pdf 1623.839KB

RCRIT-20V036-4978

 


ISSUED Interim Owner Notification Letter(Part 577)

RIONL-20V036-3495.pdf 57.522KB

RIONL-20V036-3495

 


Recall 573 Report – Amendment 1

RCLRPT-20V036-9179.PDF 215.246KB

RCLRPT-20V036-9179

 


Defect Notice 573 Report

RCLRPT-20V036-3343.PDF 214.55KB

RCLRPT-20V036-3343

 


Manufacturer Notices(to Dealers,etc)- W00 NSRAC Final and Interim Owner Letter Combo

RCMN-20V036-9532.pdf 157.345KB

RCMN-20V036-9532

 


Manufacturer Notices(to Dealers,etc) – New Safety Recall Advanced Communication

RCMN-20V036-6189.pdf 101.486KB

RCMN-20V036-6189

 


Recall Quarterly Report #1, 2020-2

RCLQRT-20V036-7709.PDF 211.148KB

RCLQRT-20V036-7709

 


ISSUED Renotification Notice

RCRN-20V036-7922.pdf 137.396KB

RCRN-20V036-7922

 


Recall Quarterly Report #2, 2020-3

RCLQRT-20V036-6447.PDF 211.259KB

RCLQRT-20V036-6447

 


Recall Quarterly Report #3, 2020-4

RCLQRT-20V036-5460.PDF 211.354KB

RCLQRT-20V036-5460

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V036&docType=RCL

 


 

Bestseller No. 1
Mopar 68218057AB ATF+4 Automatic Transmission Fluid, 1 Quart (6 Pack)
  • Genuine OEM Dodge/Mopar factory fit part
  • The approved automatic transmission fluid for all vehicles factory filled with ATF+4.
  • Do not use this transmission fluid for either Crossfire or Sprinter automatic transmissions.
  • Caution: This product can expose you to chemicals which might cause cancer and birth defects or other reproductive harm.
Bestseller No. 2
Chrysler Accessories (5013458AA) (68218058AC) ATF+4 Automatic Transmission Fluid - 1.3 Gallon / 5 Liter
  • Specially developed
  • Provides excellent lubrication under high load, high heat
  • Factory filled ATF+4
  • Genuine OEM Chrysler fluid
  • Fill for life quality fluid
SaleBestseller No. 3
Mopar Automatic Transmission Fluid, 5 Liter
  • (1) MOPAR ATF plus 4, 1. 3 Gallon Bottle
  • Part number: 68218058AC
  • Package Weight: 4.241 kilograms
  • Included components: 68218058AC
Bestseller No. 4
SaleBestseller No. 5
Valvoline ATF +4 Full Synthetic Automatic Transmission Fluid 1 QT
  • EXCEEDS DEMANDS OF AUTOMATIC TRANSMISSIONS of most Chrysler, Dodge, Ram & other Stellantis vehicles
  • HIGH-EFFICIENCY CONDITIONERS protect and prolong the elasticity of seals, preventing leaks
  • ADVANCED TECHNOLOGY REDUCES WEAR, foaming, and oxidation while protecting transmission performance
  • SUPERIOR HIGH & LOW TEMP PERFORMANCE supports transmission fluid in all weather & driving situations
Bestseller No. 6
Chrysler (68218057AA) Genuine Mopar Fluid ATF+4 Automatic Transmission Fluid - 1 Quart, 32 Ounces
  • For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
  • Genuine OEM Dodge/Mopar factory fit part
Bestseller No. 7
Mopar Automatic Transmission Fluid ATF+4-5 Liter (1.3 Gallon) 3 Pack
Bestseller No. 8
Bestseller No. 9
Valvoline (VV346-6PK ATF+4 Automatic Transmission Fluid - 1 Quart, (Case of 6)
  • Fully compatible with all transmissions that require Mopar ATF+, Mopar ATF+2 and Mopar ATF+3
  • Improved thermal stability for longer fluid life
  • Improved viscosity stability for consistent transmission operation
  • Specific frictional properties for smooth clutch engagement
  • Contains special additives to prevent rust corrosion and wear for longer life
Bestseller No. 10
Castrol Transmax ATF+4 Automatic Transmission Fluid, 1 Quart, Pack of 6
  • Full Synthetic formula exceeds ATF plus3 requirements
  • Certified and approved for all Chrysler cars and trucks that require ATF plus4, Mopar ATF plus3, ATF plus2, ATF plus2 Type 7176, or ATF plus
  • Technologically advanced, full synthetic formulation provides superior transmission life
  • Engineered with superior base oils to ensure superb low and high temperature performance
  • Meets or Exceeds Fiat Chrysler ATF plus4 requirements

Last update on 2024-02-16 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...