Safety Recall R06 / NHTSA 15V-046 Occupant Restraint Control Module – 2002-2003 Jeep Liberty & 2002-2004 Jeep Grand Cherokee & 2003-2004 Dodge Viper

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA Campaign Number: 15V046
Component(s): AIR BAGS
Potential Number of Units Affected: 752,627

Manufacturer: Chrysler (FCA US LLC)

 

SUMMARY:

Chrysler (FCA US LLC) is recalling certain model year 2002-2003 Jeep Liberty vehicles manufactured January 9, 2001, to March 28, 2003, 2002-2004 Jeep Grand Cherokee vehicles manufactured February 13, 2001, to May 23 2003, and 2003-2004 Dodge Viper vehicles manufactured November 1, 2001, to June 30, 2004.

Due to electrical noise beyond the tolerance of the air bag electronic control module (ECM), a component in the ECM may fail, causing the front air bags, side air bags, and/or seatbelt pretensioners to deploy inadvertently while the vehicle is being operated.

 

CONSEQUENCE:

Inadvertent deployment of the air bags may increase the risk of injury and the possibility of a vehicle crash.

 

REMEDY:

Chrysler dealers will replace the air bag control module and side impact sensors as required, free of charge.

These parts are not currently available, however, an interim repair is available free of charge that reduces the risk of an inadvertent deployment.

This recall remedy was applied during earlier recall campaigns of these vehicles under safety recalls 12V527 and 13V040.

All owners that have not had the recall repair performed under safety recalls 12V527 or 13V040 are strongly encouraged to have it performed and not wait for the final remedy to be deployed to the field.

The recall began on December 29, 2015.

Owners may contact Chrysler customer service at 1-800-853-1403.

Chrysler’s number for this recall is R06.

 

NOTES:

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Vehicle has a Recall

 

Revised May 2016

Dealer Service Instructions for:

 

Safety Recall R06 / NHTSA 15V-046 Occupant Restraint Control Module

NOTE: The DRBIII emulator has been updated to allow the use of the wiTECH micro pod II.  The service procedure has been revised to reflect this change.

 

Models

2002 – 2003 (KJ) Jeep Liberty
2002 – 2004 (WJ) Jeep  Grand Cherokee
2003 – 2004 (ZB) Dodge Viper

 

IMPORTANT: Some of the involved vehicles may be in dealer used vehicle inventory. Dealers should complete this recall service on these vehicles before retail delivery. Dealers should also perform this recall on vehicles in for service. Involved vehicles can be determined by using the VIP inquiry process.

 

 

Subject

The airbag system Occupant Restraint Control (ORC) module on about 745,800 of the above vehicles may experience a front airbag and/or seatbelt pretensioner inadvertent deployment. An inadvertent deployment while driving could distract the driver and cause a crash without warning.

 

Repair

The ORC module must be replaced on all involved vehicles.

Also, vehicles that had Safety Recall M35/N13 – Occupant Restraint Control Module Filter Circuit completed must also have the ORC module filter circuit removed.

 

Parts Information

ORC Module Packages with Impact Sensors:

Part Number Description
CBSZR062AA Module, ORC (2002 KJ models)
CBSZR064AA Safety Recall R06 / NHTSA 15V-046 Occupant Restraint Control Module - 2002-2003 Jeep Liberty & 2002-2004 Jeep Grand Cherokee & 2003-2004 Dodge Viper | small light Module, ORC (2003 KJ models)
CBSZR067AAeBay Module, ORC (WJ models with  Supplemental Side Airbags / with sales code CGS)

 

NOTE: To better manage required inventory for this recall, only approximately 10% of involved vehicles are expected to require impact sensor replacement.

 

ORC Module Packages without Impact Sensors:

Part Number Description
CBSZR065AA Safety Recall R06 / NHTSA 15V-046 Occupant Restraint Control Module - 2002-2003 Jeep Liberty & 2002-2004 Jeep Grand Cherokee & 2003-2004 Dodge Viper | small light Module,  ORC  (WJ  models  without Supplemental Side Airbags / without sales code CGS)
CBSZR066AA Safety Recall R06 / NHTSA 15V-046 Occupant Restraint Control Module - 2002-2003 Jeep Liberty & 2002-2004 Jeep Grand Cherokee & 2003-2004 Dodge Viper | small light Module, ORC (WJ models with Supplemental   Side Airbags / sales code CGS)
CBSZR061AAeBay Module, ORC (2002 KJ models)
CBSZR063AA Module, ORC (2003 KJ models)

 

NOTE: The ORC module packages (without impact sensors) above are only compatible with the impact sensors that originally came on the vehicle.

SPECIAL NOTE: For all (WJ) Jeep Grand Cherokee models, the new ORC modules provided in this recall do not require front impact sensors to operate correctly. The front impact sensors are permanently disabled. Do not order  or replace the front impact sensors on WJ models.

 

Part Number Description
CBXTM352AA Safety Recall R06 / NHTSA 15V-046 Occupant Restraint Control Module - 2002-2003 Jeep Liberty & 2002-2004 Jeep Grand Cherokee & 2003-2004 Dodge Viper | small light Switch, Transfer Case

 

Part Number Description
CBSZR068AA Module, ORC (All ZB models)

 

Part Number Description
68065586AA Safety Recall R06 / NHTSA 15V-046 Occupant Restraint Control Module - 2002-2003 Jeep Liberty & 2002-2004 Jeep Grand Cherokee & 2003-2004 Dodge Viper | small light Tape, Abrasion (one roll of abrasion tape will repair 10 vehicles)

 

NOTE: The abrasion tape is only required for repairing WJ models.

 

Parts Return

No parts return required for this campaign.

 

Special Tools

The following special tools are required to perform this repair:

  • NPN
wiTECH VCI Pod II
  • NPN
Laptop Computer
  • NPN
wiTECH Software

 

Service Procedure

A. Determine ORC Module Package Required (All Models)

  1. Connect the wiPOD to the vehicle data link connector.
  1. Start a wiTECH session.
  1. Select (1) “DRB III Standalone”.
  1. Select (1) “1998-2007 Diagnostics”.
  1. Select (1) “All (Except Below)”.
  1. Select (6) “Passive Restraints
  1. Select (1) “Airbags”.
  1. Select (2) “Read DTC’s”.
  1. Select (1) “Active”.
  1. Select “Page Back” and then select (2) “Stored”.
  1. Record active and stored Diagnostic Trouble Codes (DTC’s) for right and left front impact sensors on KJ models and right and left side impact sensors on WJ models:

NOTE: Install a new ORC module package that does not contain  impact sensors.

NOTE: Install a new ORC module package that contains new impact sensors.

CAUTION: If only the ORC module requires replacement at this time and at some point in the future an impact sensor(s) requires replacement, the ORC module and both impact sensors will require replacement. The ORC module packages (without impact sensors) in this recall contain an ORC module that is not compatible new impact sensors.

SPECIAL NOTE: If after completing this recall the airbag warning light is still illuminated, the cost to make additional repairs to other airbag system components is the responsibility of the vehicle owner.

 

B. Replace ORC Module (KJ Models)

WARNING: TO AVOID SERIOUS OR FATAL INJURY ON VEHICLES WITH AIRBAGS, DISABLE THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) BEFORE ATTEMPTING THIS REPAIR PROCEDURE. DISCONNECT AND ISOLATE THE BATTERY NEGATIVE (GROUND) CABLE, THEN WAIT TWO MINUTES FOR THE SYSTEM CAPACITOR TO DISCHARGE BEFORE PERFORMING SERVICE. THIS IS THE ONLY SURE WAY TO DISABLE THE SRS. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT.

  1. Open the hood and disconnect the negative battery cable from the battery.
  1. Remove and save the gear shift lever center console bezel (Figure 1).

Center Console Bezel and Shift BootFigure 1 – Center Console Bezel and Shift Boot

 

  1. Apply the park brake and place gear shift lever in the neutral position.
  1. For vehicles equipped with four wheel drive, place the four wheel drive selector handle in the “four wheel low” position.
  1. For vehicles equipped with four wheel drive, remove and save the four wheel drive lever shift handle boot (Figure 1).
  1. For vehicles with power windows, remove and save the front window switch assembly (Figure 2).

Front Window Switch AssemblyFigure 2 – Front Window Switch Assembly

 

  1. Remove and save the rear window switch assembly from the center console (Figure 3).

Rear Window Switch AssemblyFigure 3 – Rear Window Switch Assembly

 

  1. Remove and save the four center console retaining screws.
  1. Carefully remove and save the center console assembly.
  1. For vehicles that had Safety Recall M35 performed, remove and discard the foil mastic patch from the ORC module rubber cover (Figure 4). 
  1. Remove and save the ORC module rubber cover (Figure 4).

Remove and Discard Foil Mastic PatchFigure 4 – Remove and Discard Foil Mastic Patch

 

  1. For vehicles that had Safety Recall M35 performed, disconnect the ORC module jumper harness electrical connector from the body wire harness (Figure 5).

Disconnect Electrical ConnectorFigure 5 – Disconnect Electrical Connector

 

  1. Remove and save the three ORC module mounting bolts.
  1. Carefully pull the ORC module out of the vehicle and disconnect filter circuit jumper harness electrical connector (Figure 6).
  1. Discard the original filter circuit jumper harness (Figure 6).

 

Disconnect and Discard the ORC Module Filter Jumper HarnessFigure 6 – Disconnect and Discard the ORC Module Filter Jumper Harness

 

  1. Disconnect the small ORC module electrical connector (Figure 7).
  1. Destroy and discard the original ORC module.
  1. Connect the large and small body harness electrical connectors to the new ORC module and place the module into position (Figure 7).

Disconnect Small ORC Module Electrical ConnectorFigure 7 – Disconnect Small ORC Module Electrical Connector

 

  1. Install the three retaining bolts. Tighten the two large retaining bolts to 26 ft. lbs. (36 N·m). Tighten the small retaining bolt to 105 in. lbs. (12 N·m) (Figure 8).

Install Three ORC Module Retaining BoltsFigure 8 – Install Three ORC Module Retaining Bolts

 

  1. Clean off any residual glue on the ORC module rubber cover left behind by the foil mastic patch.
  1. Place the ORC module rubber cover into position over the ORC module (Figure 9).

ORC Module Rubber CoverFigure 9 – ORC Module Rubber Cover

 

  1. Install the center console assembly into position. 
  1. Install the four center console retaining screws.
  1. Install the rear window switch assembly (Figure 3).
  1. Install the front window switch assembly (Figure 2).
  1. For vehicles equipped with four wheel drive, install the four wheel drive lever shift handle boot (Figure 1).
  1. Install the gear shift lever center console bezel (Figure 1).
  1. For vehicles that require front impact sensors, continue with Section C, Front Impact Sensor Replacement. 
  1. For vehicles that do not require front impact sensors, continue with Step 30 of this procedure.
  1. Turn the ignition key to the “RUN” position, with no one inside the vehicle, connect the negative battery cable to the battery.
  1. Reset the clock on the radio.
  1. Start the vehicle.
  1. Connect the wiTECH scan tool and check for impact sensor and/or ORC module DTC’s:
  • If there are no impact sensor and/or ORC module DTC’s, continue with Step 34 of this procedure.
  • If there are impact sensor and/or ORC module DTC’s, make repairs to sensor and/or ORC module as required, then continue with Step 34 of this procedure.

NOTE: All replacement ORC Modules for this recall are configured for  the optional side curtain airbag feature. 

If a new ORC module is installed in a vehicle that is not equipped with the optional side curtain airbags, the airbag indicator lamp will illuminate and “No Right SIACM” and “No Left SIACM” DTC’s will be registered. 

The new ORC module must be configured to disable the side  curtain airbag feature using a DRBIII scan tool or wiTECH DRBIII emulator. Continue with Step 34 of this procedure. 

  1. For vehicles without side curtain airbags, use the following procedure to configure ORC Module:

NOTE: This procedure should only be performed on vehicles with active DTC’s “No Right SIACM and No Left SIACM”. 

a. From the “SELECT FUNCTION” Screen on the DRBIII select (9) “Miscellaneous” button.

b. Select (1) “Configure for Side Airbag

c. Screen Prompt : “Do you want to continue?” Select “Enter

d. Verify Current Status is set to: “ACM with Side Airbags

e. Select (2) “ACM without Side Airbags” then “Enter

f. Verify Current Status a second time, should now read: “ACM without Side Airbags

g. Select BACK PAGE to exit.

h. Select (2) Read DTC’s.

i. Select (1) Active.

j. Verify No DTC’s are Detected.

SPECIAL NOTE: If after completing this recall the airbag warning light  is still illuminated, the cost to make additional repairs to other airbag system components is the responsibility of the vehicle owner. 

  1. For vehicles equipped with four wheel drive, place the four wheel drive lever shift handle into the “2 Hi” position.
  1. For vehicles equipped with four wheel drive, check to insure that the four wheel drive indicator light is not illuminated.
  • If the four wheel drive indicator light is not illuminated, no further action is required. Continue with Step 37 of this procedure.
  1. Remove the wiTECH scan tool and return the vehicle to the customer.

 

C. Front Impact Sensor Replacement

  1. Locate the front impact sensors.

NOTE:  The front impact sensors are located to the right and left of the radiator on the radiator support vertical member (Figure 10). 

  1. Remove and save the two mounting bolts on the front impact sensor.
  1. Disconnect the electrical connector from the front impact sensor.
  1. Remove and discard the original front impact sensor.

Front Impact Sensor LocationFigure 10 – Front Impact Sensor Location

 

  1. Connect the vehicle wire harness connector to the new front impact sensor.
  1. Place the new front impact sensor into position and install the mounting bolts. Tighten the mounting bolts to 65 in. lbs. (7 N·m).
  1. Repeat Steps 1 through 6 to replace the second front impact sensor.
  1. Turn the ignition key to the “RUN” position, with no one inside the vehicle, connect the negative battery cable to the battery.
  1. Reset the clock on the radio.
  1. Connect the wiTECH scan tool and check for impact sensor and/or ORC module DTC’s:
  • If there are no impact sensor and/or ORC module DTC’s, continue with Step 11 of this procedure.
  • If there are impact sensor and/or ORC module DTC’s, make repairs to sensor and/or ORC module as required, then continue with Step 11 of this procedure.

SPECIAL NOTE: If after completing this recall the airbag warning light  is still illuminated, the cost to make additional repairs to other airbag system components is the responsibility of the vehicle owner. 

  1. For vehicles equipped with four wheel drive, place the four wheel drive lever shift handle into the “2 Hi” position.
  1. For vehicles equipped with four wheel drive, check to insure that the four wheel drive indicator light is not illuminated.
  • If the four wheel drive indicator light is not illuminated, continue with Step 13 of this procedure.
  1. Remove the wiTECH scan tool and return the vehicle to the customer.

 

D. Replace ORC Module (WJ Models)

WARNING: TO AVOID SERIOUS OR FATAL INJURY ON VEHICLES EQUIPPED WITH AIRBAGS, DISABLE THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) BEFORE ATTEMPTING THIS REPAIR PROCEDURE. DISCONNECT AND ISOLATE THE BATTERY NEGATIVE (GROUND) CABLE, THEN WAIT TWO MINUTES FOR THE AIRBAG SYSTEM CAPACITOR TO DISCHARGE BEFORE PERFORMING SERVICE. THIS  IS  THE ONLY SURE WAY TO DISABLE THE SRS. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT.

Storage Bin ScrewsFigure 11 – Storage Bin Screws

 

  1. Disconnect the negative battery cable.
  1. Remove and save the center console using the following procedure:

a. Remove and save the two retaining screws in the console storage bin (Figure 11).

b. Remove and save the cup holder insert from the console (Figure 11).

c. Remove and save the two screws under the cup holder insert (Figure 12).

Cup Holder ScrewsFigure 12 – Cup Holder Screws

 

d. Open the center console and remove and save the two screws at the bottom of the console storage bin (Figure 13).

e. Remove and save the center console assembly (Figure 14).

Console Storage Bin ScrewsFigure 13 – Console Storage Bin Screws

 

Remove/Install Center ConsoleFigure 14 – Remove/Install Center Console

 

  1. For all vehicles that had Safety Recall M35 previously performed, remove and discard the ORC module filter circuit jumper harness (Figure 15).

Remove and Discard the ORC Module Filter Circuit Jumper HarnessFigure 15 – Remove and Discard the ORC Module Filter Circuit Jumper Harness

 

NOTE: Only vehicles that had Safety Recall M35 completed will have an ORC module filter circuit jumper harness. 

 

  1. Remove, destroy, and discard the original ORC module (Figure 16).

Remove and Discard Original ORC ModuleFigure 16 – Remove and Discard Original ORC Module

 

  1. Using Mopar glass cleaner or equivalent, clean the ORC module mounting surface (Figure 17).

Clean ORC Module Mounting SurfaceFigure 17 – Clean ORC Module Mounting Surface

 

  1. Place the new ORC module into position and install the mounting bolts (Figure 18). Tighten the bolts to 95 in. lbs. (11 N·m).

Install New ORC ModuleFigure 18 – Install New ORC Module 

  1. Using the supplied tape, wrap the wire harness with tape to protect the wires (Figure 19).

Wrap Wiring with TapeFigure 19 – Wrap Wiring with Tape

 

  1. Connect the yellow ORC module wire harness electrical connectors to the ORC module (Figure 20).
  1. Route the wires as shown in Figure 20 and secure them with two plastic tie straps.

CAUTION: Make sure that all wire harnesses are routed to prevent chafing and/or wire harness damage.

Wire Routing and Tie Strap LocationFigure 20 – Wire Routing and Tie Strap Location

 

  1. Install the center console.
  1. For vehicles that require side impact sensor replacement, perform the following steps:

a. Remove and save the seat belt anchor bolt (Figure 21).

b. Remove and save the “B” pillar trim panel (Figure 21).

c. Remove and discard the original side impact sensor (Figure 22).

d. Install the new side impact sensor. Tighten the retaining bolts to 105 in. lbs. (12 N·m).

Seat Belt Anchor BoltFigure 21 – Seat Belt Anchor Bolt

 

Side Impact Sensor LocationFigure 22 – Side Impact Sensor Location

 

e. Install the “B” pillar trim panel.

f. Install the seat belt anchor bolt (Figure 21).

g. Repeat Steps 11a. through 11f. on the opposite side of the vehicle to replace the second side impact sensor.

 

SPECIAL NOTE: On all (WJ) Grand Cherokee models, all of the new ORC modules provided in this recall do not require front impact sensors to operate correctly.  The front impact sensors are permanently disabled. 

  1. Turn the ignition key to the “RUN” position, with no one inside the vehicle, connect the negative battery cable to the battery.
  1. Reset the clock on the radio.
  1. Connect the wiTECH scan tool to the vehicle and check for impact sensor and/or ORC module DTC’s:
  • If there are no impact sensor and/or ORC module DTC’s, continue with Step 15 of this procedure.
  • If there are impact sensor and/or ORC module DTC’s, make repairs to sensor and/or ORC module as required, then continue with Step 15 of this procedure.

SPECIAL NOTE: If after completing this recall the airbag warning light  is still illuminated, the cost to make additional repairs to other airbag system components is the responsibility of the vehicle owner. 

  1. Remove the wiTECH scan tool from the vehicle.
  1. Return the vehicle to the customer.

 

E. Replace ORC Module (ZB Models)

WARNING: DISCONNECT AND ISOLATE THE NEGATIVE BATTERY CABLE AT THE NEGATIVE BATTERY POST BEFORE BEGINNING AIRBAG SYSTEM COMPONENT REMOVAL OR INSTALLATION PROCEDURES. THIS WILL DISABLE THE AIRBAG SYSTEM.  FAILURE TO DISCONNECT THE BATTERY COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY. 

WARNING: ALLOW THE SYSTEM CAPACITOR TO DISCHARGE FOR TWO MINUTES BEFORE REMOVING ANY AIRBAG COMPONENTS. 

  1. Roll down both windows.
  1. Open the rear deck lid.
  1. Remove and save the battery access cover located in the trunk.
  1. Disconnect and isolate the negative battery cable from the battery (Figure 23).

Battery LocationFigure 23 – Battery Location

 

  1. Disengage the center console top cover from the center console (Figure 24).
  1. Reaching under the center console top cover, loosen the jam nut that retains the gear shift lever extension to the transmission shifter shaft (Figure 24).
  1. Unscrew and save the gear shift lever extension and gear shift ball as an assembly (Figure 24).
  1. Remove and save the center console top cover (Figure 24).

Center Console Top CoverFigure 24 – Center Console Top Cover

 

  1. Remove and save the eight instrument panel center stack bezel retaining screws and then remove the center stack bezel and HVAC control panel as an assembly (Figure 25).

Center Stack BezelFigure 25 – Center Stack Bezel

 

  1. Carefully remove and save the radio (Figure 26).

Radio Remove/InstallViper 32">Figure 26 – Radio Remove/Install

 

  1. Remove and save the left side knee bolster (Figure 27).

Knee BolsterFigure 27 – Knee Bolster

 

  1. Remove and save the left instrument panel speaker cover (Figure 28).

Left Speaker CoverFigure 28 – Left Speaker Cover

 

  1. Remove and save the four steering column nuts and carefully lower the steering column. 
  1. Remove and save the instrument cluster bezel (Figure 29).

Instrument Cluster BezelFigure 29 – Instrument Cluster Bezel

 

  1. Remove and save the instrument panel center stack white gauge cluster (Figure 30).
  1. Remove and save the instrument panel black plastic frame retaining screws (Figure 30).

Instrument Panel Center Stack Gauge Cluster and Frame Retaining ScrewsFigure 30 – Instrument Panel Center Stack Gauge Cluster and Frame Retaining Screws

 

  1. Temporarily reinstall the steering column. 
  1. Carefully relocate all of the disconnected instrument panel electrical connectors located near the ORC module.
  1. Disengage the center console wire harness at the floor stud on the floor board (Figure 31).

Floor StudFigure 31 – Floor Stud

 

  1. Disconnect the ORC module yellow connectors. 
  1. Remove and save the ORC module mounting bolts.
  1. Remove, destroy, and discard the original ORC module.
  1. For vehicles that had Safety Recall N13 performed, remove and discard the ORC module filter circuit harness and box.
  1. Install the new ORC module.
  1. Install the ORC module mounting Tighten the bolts to 95 in. lbs. (11 N·m).
  1. Connect the yellow body wire harness to the ORC module connectors.
  1. Secure the center console wire harness to the floor stud on the floor board (Figure 24).
  1. Install the instrument panel black plastic frame retaining Tighten the screws securely (Figure 30).
  1. Install the instrument panel center stack white gauge cluster (Figure 30).
  1. Install the radio assembly (Figure 26).
  1. Lower the steering column.
  1. Install the instrument cluster bezel (Figure 29).
  1. Install the left instrument panel speaker cover (Figure 28).
  1. Install the steering column. Tighten the four steering column retaining nuts to 150 in. lbs. (17 N·m).
  1. Install the left side knee bolster (Figure 27).
  1. Install the instrument panel center stack bezel (Figure 25).
  1. Place the center console top cover partially into position (Figure 24).
  1. Screw the gear shift lever extension onto the transmission shifter shaft. 
  1. Reaching under the center console top cover, tighten the jam nut that retains the gear shift lever extension to the transmission shifter shaft (Figure 32).

Install Gear Shift Extension and Tighten Jam NutFigure 32 – Install Gear Shift Extension and Tighten Jam Nut

 

NOTE: Be sure that the gear shift knob gear shift pattern indicator is correctly orientated before tightening the jam nut. 

  1. Snap the center console top cover into position.
  1. Place the ignition to the run position.
  1. After checking that no one is inside the vehicle, connect the negative battery cable.
  1. Install the battery access panel and close the deck lid (Figure 23).
  1. Connect the wiTECH scan tool to the vehicle and check for ORC module DTC’s:
  • If there are no ORC module DTC’s, continue with Step 45 of this procedure.
  • If there are ORC module DTC’s, make repairs to the ORC module as required, then continue with Step 45 of this procedure.

SPECIAL NOTE: If after completing this recall the airbag warning light  is still illuminated, the cost to make additional repairs to other airbag system components is the responsibility of the vehicle owner. 

  1. Remove the wiTECH scan tool from the vehicle.
  1. Reset the clock on the radio.
  1. Return the vehicle to the customer.

 

F. Replace the Four Wheel Drive Indicator Light Switch

  1. Carefully lift the vehicle on an appropriate hoist.
  1. Disconnect the transfer case shift cable at the transfer case lever on the transfer case.
  1. Remove and save the three transfer case shift cable bracket mounting bolts on the side of the transfer case.
  1. Relocate the transfer case shift cable bracket and shift cable to gain access to the transfer case four wheel  drive  indicator light switch (Figure 33).

Shift Cable and BracketFigure 33 – Shift Cable and Bracket

 

  1. Using a 1 ½ inch socket, remove and discard the original transfer case four wheel drive indicator light switch (Figure 34).

Transfer Case Switch" width="907" height="605" title="Safety Recall R06 / NHTSA 15V-046 Occupant Restraint Control Module - 2002-2003 Jeep Liberty & 2002-2004 Jeep Grand Cherokee & 2003-2004 Dodge Viper 40">Figure 34 – Transfer Case Switch

 

  • Install the new transfer case four wheel drive indicator light switch. Tighten the switch to 20 ft. lbs. (27 N·m).
  1. Place the transfer case shift cable bracket and shift cable into position.
  1. Install the three transfer case shift cable bracket mounting bolts. Tighten the bolts securely.
  1. Connect the transfer case shift cable to the transfer case lever on the transfer case.
  1. Lower the vehicle from the hoist.

 

Completion Reporting and Reimbursement

Claims for vehicles that have been serviced must be submitted on the DealerCONNECT Claim Entry Screen located on the Service tab. Claims submitted will be used by FCA to record recall service completions and provide dealer payments.

Use one of the following labor operation numbers and time allowances:

Labor Operation
Number
Time
Allowance
Replace ORC module (KJ models) 08-R0-61-82 0.9 hours
Replace ORC module (WJ models) 08-R0-61-83 0.5 hours
Replace ORC Module (ZB models) 08-R0-61-84 1.7 hours
Related Operation (KJ Only)
Replace 4×4 transfer case switch 08-R0-61-50 0.4 hours
Replace front impact sensors 08-R0-61-51 0.2 hours
Optional Equipment (WJ Only)
Replace side airbag sensors 08-R0-61-60 0.5 hours

 

Add the cost of the recall parts package plus applicable dealer allowance to your claim.

NOTE: See the Warranty Administration Manual, Recall Claim Processing Section, for complete recall claim processing instructions.

 

Dealer Notification

To view this notification on DealerCONNECT, select “Global Recall System” on the Service tab, then click on the description of this notification.

 

Owner Notification and Service Scheduling

All involved vehicle owners known to FCA are being notified of the service requirement by first class mail. They are requested to schedule appointments for this service with their dealers.  A generic copy of the owner letter is attached.

Enclosed with each owner letter is an Owner Notification postcard to allow owners to update our records if applicable.

 

Vehicle Lists, Global Recall System, VIP and Dealer Follow Up

All involved vehicles have been entered into the DealerCONNECT Global Recall System (GRS) and Vehicle Information Plus (VIP) for dealer inquiry as needed.

GRS provides involved dealers with an updated VIN list of their incomplete vehicles. The owner’s name, address and phone number are listed if known. Completed vehicles are removed from GRS within several days of repair claim submission.

To use this system, click on the “Service” tab and then click on “Global Recall System.” Your dealer’s VIN list for each recall displayed can be sorted by: those vehicles that were unsold at recall launch, those with a phone number, city, zip code, or VIN sequence.

Dealers must perform this repair on all unsold vehicles before retail delivery. Dealers should also use the VIN list to follow up with all owners to schedule appointments for this repair.

Recall VIN lists may contain confidential, restricted owner name and address information that was obtained from the Department of Motor Vehicles of various states.  Use of this information  is permitted for this recall only and is strictly prohibited from all other use.

 

Additional Information

If you have any questions or need assistance in completing this action, please contact your Service and Parts District Manager.

Customer Services / Field Operations

FCA US LLC

 

OCCUPANT RESTRAINT CONTROL MODULE

 

IMPORTANT SAFETY RECALL
R06 / NHTSA 15V-046

 

This notice applies to your vehicle (VIN: xxxxxxxxxxxxxxxxx).

 

This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Dear: (Name)

FCA US LLC has decided that a defect, which relates to motor vehicle safety, exists in certain 2002 and 2003 model year Jeep Liberty models; 2002 through 2004 model year Jeep Grand Cherokee models; and 2003 and 2004 model year Dodge Viper models. 

The problem is… The airbag system Occupant Restraint Control (ORC) module on your vehicle may experience a front airbag and/or seatbelt pretensioner inadvertent deployment. An inadvertent deployment while driving could distract the driver and cause a crash without warning.
What your dealer will do… FCA will repair your vehicle free of charge. To do this, your dealer will replace the Occupant Restraint Control module. The work will take about two hours to complete. However, additional time may be necessary depending on service schedules.
What you must do to ensure your safety… Simply contact your Chrysler, Jeep, Dodge or RAM dealer right away to schedule a service appointment.  Please bring this letter with you to your dealer.
If you need help… If you have questions or concerns which your dealer is unable to resolve, please contact the FCA Group Recall Assistance Center at either fcarecalls.com or 1-800-853-1403.

 

Please help us update our records by filling out the attached prepaid postcard if any of the conditions listed on the card apply to you or your vehicle.  If you have further questions go to fcarecalls.com.

If you have already experienced this specific condition and have paid to have it repaired, you may visit www.fcarecallreimbursement.com to submit your reimbursement request online or you can mail your original receipts and proof of payment to the following address for reimbursement consideration: FCA Customer Assistance, P.O. Box 21-8004, Auburn Hills, MI 48321-8007, Attention: Recall Reimbursement. Once we receive and verify the required documents, reimbursement will be sent to you within 60 days. If you’ve had previous repairs and/or reimbursement you may still need to have the recall repair performed on your vehicle.

If your dealer fails or is unable to remedy this defect without charge and within a reasonable time, you may submit  a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E.,  Washington,  DC   20590,  or  you  can  call  the  toll-free  Vehicle  Safety  Hotline  at  1-888-327-4236   (TTY 1-800-424-9153), or go to safercar.gov.

We’re sorry for any inconvenience, but we are sincerely concerned about your safety. Thank you for your attention to this important matter.

Customer Services / Field Operations

FCA US LLC

Note to lessors receiving this recall: Federal regulation requires that you forward this recall notice to the lessee within 10 days.

 


 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [3.70 MB]

 


 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [340.56 KB]

 


 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [101.99 KB]

 


 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [24.54 KB]

 


 

Bestseller No. 1
Autel AutoLink AL619 Scanner, 2024 ABS SRS Airbag Warning Light Diagnostic Scan Tool, Up of AL519 ML519 ML619, 10 OBDII Test Modes, DTCs Lookup, Live Data, Turn Off Check Engine Light OBD2 Code Reader
  • 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
  • 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
  • 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
  • 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
  • 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
Bestseller No. 2
AUTOPHIX Bluetooth OBD2 Scanner, 3210 PRO Car Scan Tool Check Engine ABS SRS Transmission Wireless Code Reader Auto Car Diagnostic Scanner with Battery Test Exclusive APP for iPhone, iPad & Android
  • 5 IN 1 DIAGNOSTIC SCANNER: This is an OBDII scanner and 4 systems diagnostic tool. The AUTOPHIX 3210 PRO Bluetooth Auto Scanner not only has OBDII diagnostic function, but can also be used as an ABS/SRS/transmission scanner and check engine code reader. When it is an OBD2 scanner, you can use it to check if your car is ready for annual test via I/M preparation menu. In addition, the built-in DTC library, live data stream, data playback, performance testing and many more such functions are supported by it.
  • RELIABLE CAR HEALTH MONITOR: Are you confused when the ABS/SRS/Transmission/Check Engine warning light is blinking? The AUTOPHIX 3210 PRO Bluetooth Scanner will help you to do a thorough scanning and inspecting of your car and find out the root cause, which saves your time and money. Tip:The warning light will be turned off after the problem is solved. Airbag crash/collision data cannot be cleared, even if you replace the airbag with a new one.
  • QUICK DIAGNOSIS: The 3210 PRO is the newest 2024 Enhanced 4-System Bluetooth Code Reader that retrieves vehicle information, reads/clears trouble codes, and displays a 4-in-1 live data stream. You'll easily find out what's wrong with your car. In just a few minutes, you'll be in control of your car!
  • EXCLUSIVE APP: Are you tired of the following with third party apps? For example: 1.need to download different apps for different cars? 2. require extra download fees? 3. only support a few functions? 4. can only use one of Android and iOS? Now!One AUTOPHIX 3210 PRO Scanner is enough to solve all the above problems. The must-have wireless/bluetooth automotive diagnostic tool/code reader for today's car owners. iPhone iOS, iPad, Android can be downloaded for free without any additional subscription fees.
  • ADVANCED DATA FLOW DISPLAY:AUTOPHIX 3210 PRO Bluetooth code reader allows you to graphically display your vehicle's data flow instead of boring text, including engine coolant temperature, engine RPM, vehicle speed, absolute throttle position, control module voltage, etc. You can view different parameter values corresponding to different times. The advanced data streams provide useful information for entry-level professionals and diyers who can troubleshoot vehicle problems quickly and efficiently.
SaleBestseller No. 3
FOXWELL NT630 Plus OBD2 Scanner Diagnostic Tool, 2024 ABS Scan Tool Bleeding Brake SRS Scanner Car Code Reader Bidirectional Scanner with Airbag Light Reset SAS Oil Light EPB Service
  • 2024 Best Choice for ABS Bleeder Scan Tool - Was the brake pedal always slowly sinking down or becoming loose? This abs brake bleeding scan tool will bleed the brake system by cycling the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with abs auto bleed function you can find. With the clear step by step instruction, even a beginner can use it. Coverage check on FOXWELL official site: Support- Diagnostic Coverage List.
  • More Than a Entry Level OBD Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD diagnostics to the next level by customizing all functions for ABS and SRS systems. This srs abs scanner provides in-depth insights on error code diagnosis, wheel speed sensor live data, airbag circuits and cable connectors monitor, module activation and etc. It's an total game-changer in resolving ABS SRS issues.
  • No More Higher End Service than You Needed - One NT630 Plus is enough! This obd2 scanner with abs and srs takes depth diagnosis on Anti-Lock Brake System & Supplemental Restraint System, and also performs daily required resetting services which same priced scanners cannot do. Like Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset and EPB service functions. this car scanner will help the part to operate normally after the faults repaired.
  • Also can Work like NT301 - The NT630 Plus abs code reader connect to the OBD2 port directly. It will diagnose all obd2 modules instantly, displays the live data, locates bad sensors and I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
  • Complicate? Unreadable? - Intuitive LCD display with clear operate instructions, even a beginner can diagnose the car faults with the NT630 Plus. Ergonomic Touch with anti-collision and anti-slip cover design, comfortable for daily car diagnose work. Unique button press sound will provide the overall tactile and visual experience to notice you a task has been completed or a command has been executed.
Bestseller No. 4
INNOVA 6100P OBD2 Scanner ABS SRS Transmission, Car Code Reader Diagnostic Scan Tool with Oil Reset, Alternator Test, Full OBD II, Live Data
  • 【Buy with Confidence】 As a America's No.1 diagnostic tool brand, Innova stands for innovation, quality, and accessibility in the automotive diagnostic industry. We are known for developing cutting-edge diagnostic tools that are user-friendly, reliable, and made for US by Americans.
  • 【Unleash Your Drive's Potential】Much more than a car code reader, the 6100P scanner effectively reads and erases engine, ABS, SRS, and transmission codes for popular US car makes such as Ford, Chevy, Dodge, GM, etc. When the traction light is constantly on, the ability to really detect where the problem is concerning brakes and airbags enables you to make sure all safety measures in place before putting yourself in harm's way.
  • 【Your Car's Health Doctor】Easily view procedures or send commands for oil change, mileage or driving time reset for most 1996 and newer OBD2 vehicles. It also monitors your oil level and oil life status, ensuring optimal vehicle health.
  • alternator Test】The Innova 6100P scanner is perfect for assessing the performance of the alternator in your hybrid, car, SUV, minivan, or light truck diesel as well. During rough winters and scorching summers, this diagnostic tool will be invaluable when trying to root out start-up issues.
  • 【Drive with Confidence and Peace】Quickly identify if your vehicle needs immediate attention with our Code Severity Levels function. This feature helps you understand whether you need to fix an issue immediately or if it can wait until you get home, keeping warning lights at bay.
SaleBestseller No. 5
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission, Check Engine Code Reader,Diagnostic Scan Tool with SRS Airbag Scanner, Car Diagnostic Scanner for All Cars with Battery Test
  • 🎄【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
  • 🎅【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
  • 🎄【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
  • 🎅【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
  • 🎄【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
Bestseller No. 6
ANCEL FX2000 OBD2 Scanner Diagnostic Tool, ABS SRS Transmission Airbag Car Scanner, Check Engine Car Code Reader, Automotive Scan Tool for All Cars
  • 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 scan tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use it to read the data and find out what the fault codes mean.
  • 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 engine code reader also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
  • 🚙【TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. It provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
  • 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 automotive scanner is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
  • 🚌【ABS OBD2 SCANNER】:The FX2000 diagnostic scanner for all vehicles can read and clear the Diagnostic Trouble Codes (DTC) data stream transmitted from the ABS. By retrieving the ABS code data, the obd scanner can check the various brake components and accurately diagnose problems.
SaleBestseller No. 7
ABS& SRS Scanner Diagnostic Tool with Active Test, TOPDON Scanner for Car with Oil/BMS/SAS Reset Service, Full OBD2 Functions Automotive Scan Tool, Lifetime Free Update" rel="nofollow noopener sponsored" target="_blank"> OBD2 Scanner Code Reader AL600, ABS& SRS Scanner Diagnostic Tool with Active Test, TOPDON Scanner for Car with Oil/BMS/SAS Reset Service, Full OBD2 Functions Automotive Scan Tool, Lifetime Free Update
OBD2 Scanner Code Reader AL600, ABS& SRS Scanner Diagnostic Tool with Active Test, TOPDON Scanner for Car with Oil/BMS/SAS Reset Service, Full OBD2 Functions Automotive Scan Tool, Lifetime Free Update
  • [ABS & SRS Scanner with Active Test] The ABS/ SRS diagnostic tool Read & clear DTCs, displays live data in a graph to locate the cause of faults and assists the home mechanic with repairs and clearing ABS and airbag warning lights. Active test sensors, valves or solenoids etc. and tracks any threats in real time. It is invaluable to have a diagnostic tool with Active Test feature that you will never find on similar ABS/ SRS scanners.
  • 【3 HOP Reset Services 】Easy to set up 3 regular reset services for Oil Light, Battery Management System, and Steering Angle Position. With this obd2 scanner, you can reset the oil service light and reset pre-programmed mileage intervals for energy efficiency; adjust or reset the steering angle position to keep steering aligned; and clear the original low battery fault information. No need to leave home for shop-quality car maintenance.
  • 【All OBD2 Test Modes 】 This ABS & SRS scan tool is also a full featured obd2 code reader, allowing a quick test of the engine system of OBD II vehicles, can Read/Clear engine light codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Evap Test, Read Vehicle Information, and help pass smog test for most post-1996 OBD2/CAN vehicles.
  • [DTC LookUp Library] Can't read the code? Go to the DTC LookUp Library. The Topdon AL600 OBD2 scanner offers a wealth of code definitions so you don't have to look them up in a list or database, and the HELP function takes you to diagnostic tips for possible fixes, saving time searching for repair materials online. No other scan tool or code reader under $100 offers this level of assistance.
  • [User-Oriented] You'll love the feel of this automotive scanner, with black rubber grips all around the outer edges for durability and to withstand accidental drops. With its easy access menu, you can operate all functions in minutes with just a few button presses. The 3-color LEDs give you a intuitive indication of the OBD2 test results in a second. 3 shortcut keys, one key to read/clear DTCs and a one-touch smoke status check make it easy to use even for beginners.
SaleBestseller No. 8
BLCKTEC 430 Bluetooth OBD2 Scanner Diagnostic Tool - Car Code Reader for All Cars OBDII Compatible - Read & Clear Engine, ABS, SRS, Oil Light, & More - Subscription Free OBD App On iOS & Android
  • SIMPLIFYING CAR REPAIR - Our goal is to simplify your car repair process. Our device turns your smartphone into a powerful OBD2 scanner diagnostic tool, allowing you to quickly understand your vehicle's problem, view recommended fixes, and purchase the necessary parts for repair.
  • EXPERIENCE PROFESSIONAL DIAGNOSTICS - BLCKTEC's enhanced vehicle diagnostics gives you access to advanced features typically found only on high-end scanners. With our car code reader you can read and clear engine codes, ABS (brakes), SRS (airbags), TPMS codes, and many more.
  • RELIABLE AND ACCURATE RESULTS - Our car scanner utilizes the latest OBD2 technology to provide accurate and reliable diagnostic information, ensuring that you can trust the results you receive.
  • COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Our bluetooth OBD2 scanner works with most vehicles made after 1996, including cars, trucks, and SUVs, making it a versatile tool for any DIYer.
  • USER-FRIENDLY APP - Our accompanying app is easy to use and navigate, with clear and concise information displayed in an easy-to-understand format. Available on IOS and Android.
Bestseller No. 9
C410 OBD2 Scanner Fit for BMW Mini EPB ABS SRS DPF Oil Reset Multi System Scan Tool with Battery Registration OBDII Code Reader Diagnostic Scan Tool [New Version Update of Creator C110+ C310+]
  • [COMPATIBLE FOR BMW] - As what you've seen, we have a variety of OBD2 code readers compatible for BMW and MINI, C410 is one of the most cost-effective scan tools fit for BMW and MINI vehicle owners. C410 Supports most BMW and MINI after 2001. 1997-2004 cars need a 20 pin adaptor (not included).
  • [FIT FOR BMW AND MINI] - Compatible ECU systems including Drive, Chassis and Body all system. Supported function including read and clear trouble codes, display live data stream, graph display, vehicle version information, clear adaptation, CBS reset and reset Engine oil.
  • [EASY TO OPERATE] - C410 car diagnostic tool via 2.4" TFT 240K true color LCD display screen to indicates the test results , with the silicone keypad you can easy to access the each of menu options, Rugged drop-proof case Prevent falling, the menu layout on the screen is easy to understand and you will no trouble to figuring out how to do what you needed.
  • [LIFETIME FREE UPDATE] - Many OBDII scanners for BMW require to pay an additional fee for new upgrades after the warranty period has expired. C410 supports lifetime free software upgrades, new parameters, functions and the latest vehicle data are constantly updated via the USB port over the Internet. Just a few easy steps, the scanner will always be up to date with the latest system within minutes.
  • [ATTENTION PLEASE!!!] - Battery registration function does not support cars before 2004 and also does not support the E chassis (3 Series_E46, 5 Series_E39, 7 Series_E38, X3_E83, X5_E53, Z3_E36, Z4_E85/E86, MINI_R50/R51/R52/R53). For the above chassis models, you just need to replace the battery directly, because these models do not require battery registration. In addition, the battery registration function only for the same type and capacity battery. Inconsistent battery type or capacity can lead to registration failure.
Bestseller No. 10
MUCAR OBD2 Scanner Diagnostic Tool, Car Scanner with 6 Systems (ABS SRS ECM TCM BCM TPMS) and 7 Reset Services (Oil EPB SAS ETS TPMS ABS DF), Scan Tool for All Cars and Update Free Lifetime
  • 【Wifi Upgrade】- After you receive our products, for better product experience as well as car diagnositic, please connect to wifi/phone hotspot and accept or take the initiative to update APP operating system and car brand diagnostic software.
  • 【Professional 6 System Diagnosis】- This OBD2 scanner has the most commonly system: ABS, SRS, Transmission, Engine, BCM and TPMS, which offers solution to pinpoint troubles of your cars.
  • 【7 Most Useful Reset Services】- The car scanner can provides 7 hot maintenance reset: Oil EPB SAS ETS TPMS ABS DF. These powerful reset functions will make your car safer and more reliable.
  • 【5" Large HD Touchscreen】- This car diagnostic scanner is equipped with a 5" color HD touchscreen: Compared with other screens, the displayed data and charts will be clearer.
  • 【4 in 1 Live Data Display】- The car scanner tool shows live data of each control module by text or graphs, up to 4 parameters can be displayed at the same time. Test reports are easy to share and print.

Last update on 2024-03-15 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


 

1 thought on “Safety Recall R06 / NHTSA 15V-046 Occupant Restraint Control Module – 2002-2003 Jeep Liberty & 2002-2004 Jeep Grand Cherokee & 2003-2004 Dodge Viper”

  1. Good afternoon, tell me please I have a block P56010488AF I want to replace it with a new one because the front pillows worked during the impact, what do I need? not to be mistaken, the car Jeep Grand Cherokee II 2.7 CRD 4WD 2002

    Reply

Leave a Comment

Share to...