NUMBER: 02-003-07
GROUP: Suspension
DATE: August 21, 2007
SUBJECT:
Squeak Like Sound From Rear Spring Isolator
OVERVIEW:
This bulletin involves the replacement of the upper rear spring isolators (two in total), and orientation of the spring to prevent against reoccurrence.
MODELS:
| 2005 – 2008 | (WK) | Grand Cherokee |
| 2005 – 2008 | (WH) | Grand Cherokee (International Markets) |
| 2006 – 2008 | (XK) | Commander |
| 2006 – 2008 | (XH) | Commander (International markets) |
NOTE: This bulletin applies to domestic built (JNAP) vehicles and internationally built (GRAZ) vehicles built prior to July 26, 2007 (MDH 0726XX).
SYMPTOM/CONDITION:
The customer may experience a squeak like sound coming from the rear suspension of the vehicle. The squeak will occur most often when the rear of the body and the rear suspension move relative to each other. The squeak sound is typically caused by the misalignment of the rear spring upper pigtail in relation to the upper spring seat.
DIAGNOSIS:
With the vehicle parked and on a flat surface, rock (jounce) the rear of the vehicle up and down. If the squeak-like sound occurs at one or more of the two upper rear spring isolators, then perform the Repair Procedure.
PARTS REQUIRED:
| Qty. | Part No. | Description |
| 2 | 52089341AE | Isolator, Rear Spring |
REPAIR PROCEDURE:
- Replace the two (2) upper rear spring isolators. Refer to the detailed repair procedures in TechCONNECT – Service Info Tab / 2 – Suspension / Rear / Spring / Removal and Installation.
- Orient both rear springs such that the upper pigtail end/gap are facing rearward in vehicle.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
| Labor Operation No: | Description | Amount |
| 02-30-11-91 | Isolator, Upper Rear Spring – Replace Two (B) | 0.7 Hrs. |
FAILURE CODE:
| ZZ | Service Action |
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 02-005-05, DATED DECEMBER 14, 2005, WHICH SHOULD BE REMOVED FROM YOUR FILES. THIS IS A COMPLETE REVISION AND NO ASTERISKS HAVE BEEN USED TO HIGHLIGHT REVISIONS.
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
Last update on 2026-06-17 / Affiliate links / Images from Amazon Product Advertising API
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
Last update on 2026-06-17 / Affiliate links / Images from Amazon Product Advertising API
- Industrial Grade: Our Lubrimatic 55-001 Fluid & Oil Transfer Pump Is A Simple And Effective Solution For Adding Fluids To Small Engines, Automotive Transmissions And Axles, Farm Equipment, Industrial Equipment, And Marine Lower Units; Ideal For Adding Oil And Other Fluids, Such As Antifreeze, Fuel, Steering Fluid, Or Gear Lube, To Small Engines And Marine Lower Units.Fit Type: Universal Fit
- Leak-Free Fluid Transfer: Avoid Messy Spills And The Hassle Transferring Fluids; The Lubrimatic 55-001 Threads Securely Onto Quart Sized Bottles And Containers With Traditional Sized Necks As Commonly Used For Motor Oil, Atf, And Gear Lube; Not Compatible With Bottles That Have Oversize Or Wide-Mouth Necks; Transfers Fluids At 4Cc’S Per Stroke
- Rigid Inlet Tubes: Make Kinks A Thing Of The Past! The Stiff, Rigid Construction Of The Inlet Tubes Ensures That No Clogs Or Obstructions Will Keep Your Fluids From Pouring Smoothly; Inlet Tubes Won'T Curl Like Flexible Tubes, Ensuring A More Complete Fluid Transfer
- Flexible Hose: Includes A 17 Inch Long, 3/8 Inch Diameter Flexible Outlet Hose To Allow Easy Access To Hard To Reach Fill Plugs And Tubes
Last update on 2026-06-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.