| “This site contains affiliate links for which OEMDTC may be compensated” |
March 19, 2024 NHTSA CAMPAIGN NUMBER: 24V209000
Missing Tire & Rim Information on Label/FMVSS 110
Missing rim and tire size information could lead to an incorrect wheel being installed, increasing the risk of a crash.
NHTSA Campaign Number: 24V209
Manufacturer Chrysler
(FCA US, LLC) (Stellantis)
Components EQUIPMENT
Potential Number of Units Affected 1,201
Summary
Chrysler (FCA US, LLC) (Stellantis) is recalling certain 2024 Dodge Hornet and Alfa Romeo Tonale vehicles. The manufacturer label is missing the tire rim and tire size information. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, “Tire Selection and Rims.”
Remedy
Dealers will apply a corrected label, free of charge. Owner notification letters were mailed April 4, 2024. Owners may contact FCA customer service at 1-800-853-1403. FCA’s number for this recall is 32B.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your Vehicle has a Recall
New Safety Recall Advanced Communication – 32B
FCA US LLC (FCA US) has announced a safety recall on certain 2024 Model Year (GG) Dodge Hornet and (GC) Alfa Romeo Tonale vehicles.
REASON FOR THIS SAFETY RECALL
Some of the above vehicles may have been built with a manufacturer label that is missing rim and tire size designation information. A driver may use an incorrect rim size, which can increase the risk of a crash.
Federal Motor Vehicle Safety Standard (FMVSS) 571.110 S4.3.3 “Additional Labeling Information for Vehicles Other Than Passenger Cars” requires “Each vehicle shall show the size designation and, if applicable, the type designation of rims (not necessarily those on the vehicle) appropriate for the tire appropriate for use on that vehicle, including the tire installed as original equipment on the vehicle by the vehicle manufacturer” to be printed on the manufacturer label. Subject vehicles are equipped with a manufacturer label that is missing the size designation of the rims.
SERVICE ACTION
FCA US will conduct a voluntary safety recall to apply a manufacturer label overlay with corrected information. The remedy for this condition is not currently available. Dealers will be notified of the launch of this safety recall by way of established communication methods. This recall is estimated to launch in 2nd Quarter of 2024.
Manufacturer label
Reference: 32B / NHTSA 24V-209
Remedy available for
2024 (GG) Dodge® Hornet
Remedy available for
2024 (GC) Alfa Romeo® Tonale
Template Version 1.0
| Revision | Edition | Detail |
| 0 | March 2024 | Initial Version. |
SYMPTOM DESCRIPTION
About 1,200 of the above vehicles may have been built with a manufacturer label that is missing rim and tire size designation information. Relying on incorrect rim and tire size designation information can result in the use of an incorrect wheel, which can increase the risk of a crash.
Federal Motor Vehicle Safety Standard (FMVSS) 571.110 S4.3.3 “Additional Labeling Information for Vehicles Other Than Passenger Cars” requires “Each vehicle shall show the size designation and, if applicable, the type designation of rims (not necessarily those on the vehicle) appropriate for the tire appropriate for use on that vehicle, including the tire installed as original equipment on the vehicle by the vehicle manufacturer” to be printed on the manufacturer label. Subject vehicles are equipped with a manufacturer label that is missing the size designation of the rims.
SCOPE
NOTE: Some vehicles above may have been identified as not involved in this recall and therefore have been excluded from this recall.
IMPORTANT:
- Some of the involved vehicles may be in dealer new vehicle inventory. Federal law requires you to complete this recall service on these vehicles before retail delivery. Violation of this requirement by a dealer could result in a civil penalty of up to $27,168 per vehicle.
- Some of the involved vehicles may be in dealer used vehicle inventory. Dealers should complete this recall service on these vehicles before retail delivery.
- Dealers should also perform this recall on vehicles in for service.
Involved vehicles can be determined by using the VIP inquiry process.
REPAIR TO BE PERFORMED
Install an overlay label to the Manufacturer label.
ALTERNATE TRANSPORTATION
Dealers should attempt to minimize customer inconvenience by placing the owner in a loaner vehicle if the vehicle must be held overnight.
| Vehicle | Average Daily Allowance |
| (GG) Dodge Hornet | |
| (GC) Alfa Romeo Tonale |
NOTE: See the Warranty Administration Manual, Recall Claim Processing Section, for complete recall claim processing instructions.
PARTS INFORMATION
Labels will be sent to the owners in the owner letter and mailed to dealers based on unsold VINs. There are no part numbers for the labels. Replacement labels can be ordering via DealerConnect.
Process Steps to Order a Replacement
Manufacturer Overlay Label:
- Access the “DealerCONNECT” website.
- Select the “Marketing” link in the header of DealerCONNECT.
- Locate the “Product Information” section heading on the Marketing page.
- Select the “Literature and Merchandising Materials” link in the product information section.
- Locate the “MOPAR” section heading on the Literature and Merchandising Materials page.
- Select the “Recall Labels / Cards” link listed in the MOPAR section.
- Select Item > Update Cart > Submit Order.
PARTS RETURN
No parts return required for this campaign.
SPECIAL TOOLS
No Special Tools are required to perform this service procedure.
DEALER NOTIFICATION
To view this notification on DealerCONNECT, select “Global Recall System” on the Service tab, then click on the description of this notification.
OWNER NOTIFICATION / SERVICE SCHEDULING
All involved vehicle owners known to FCA are being notified of the service requirement by first class mail. They are requested to schedule appointments for this service with their dealers. A generic copy of the owner letter is attached.
SERVICE PROCEDURE
- Locate the manufacturer label on the vehicle driver side B-pillar (Figure 1).
- Obtain the NEW manufacturer overlay label for the vehicle and verify the overlay label is appropriate for the vehicle based on engine and tire size the vehicle is equipped with.
| Overlay 1 | If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 225/55R18 tires Use overlay with GVWR of 2420 kg/5335 lb and 225/55R18 tires |
| Overlay 2 | If vehicle is equipped with a 2.0L Engine and 225/55R18 tires
Use overlay with GVWR of 2250 kg/4960 lb and 225/55R18 tires |
| Overlay 3 | If vehicle is equipped with a 2.0L Engine and 235/40R20 tires
Use overlay with GVWR of 2250 kg/4960 lb and 235/40R20 tires |
| Overlay 4 | If vehicle is equipped with a 2.0L Engine and 215/60R17 tires
Use overlay with GVWR of 2250 kg/4960 lb and 215/60R17 tires |
| Overlay 5 | If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 235/40R20 tires Use overlay with GVWR of 2420 kg/5335 lb and 235/40R20 tires |
| Overlay 6 | If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 235/45R19 tires Use overlay with GVWR of 2420 kg/5335 lb and 235/45R19 tires |
- Use isopropyl alcohol or window cleaner and a clean cloth to remove any wax, oil, dust, and debris from the existing manufacturer label.
- Allow the isopropyl alcohol or window cleaner to fully evaporate before applying the overlay label.
- Apply appropriate overlay label to the manufacturer label in the original position and with the same text orientation to correct the information (Figure 2).
- Apply pressure to the entire surface of the manufacturer overlay label with firm overlapping strokes removing all wrinkles and air bubbles. Using a tool such as a squeegee is allowed.
- Return the vehicle to the customer or inventory.
SAFETY RECALL 32B – MANUFACTURER LABEL
OWNER INSTRUCTIONS
INSTALL THE MANUFACTURER OVERLAY LABEL BY FOLLOWING THE PROCEDURE BELOW:
- Locate the manufacturer label on the vehicle driver side B-pillar (Figure 1).
- Obtain the NEW manufacturer overlay label for the vehicle.
NOTE: Only one overlay label will be supplied depending on your vehicle type. Please verify the overlay label is appropriate for the vehicle based on engine and tire size the vehicle is equipped with.
- If you believe you received an incorrect overlay label, please contact your dealer.
| Overlay 1 | If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 225/55R18 tires Use overlay with GVWR of 2420 kg/5335 lb and 225/55R18 tires |
| Overlay 2 | If vehicle is equipped with a 2.0L Engine and 225/55R18 tires
Use overlay with GVWR of 2250 kg/4960 lb and 225/55R18 tires |
| Overlay 3 | If vehicle is equipped with a 2.0L Engine and 235/40R20 tires
Use overlay with GVWR of 2250 kg/4960 lb and 235/40R20 tires |
| Overlay 4 | If vehicle is equipped with a 2.0L Engine and 215/60R17 tires
Use overlay with GVWR of 2250 kg/4960 lb and 215/60R17 tires |
| Overlay 5 | If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 235/40R20 tires Use overlay with GVWR of 2420 kg/5335 lb and 235/40R20 tires |
| Overlay 6 | If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 235/45R19 tires Use overlay with GVWR of 2420 kg/5335 lb and 235/45R19 tires |
- Use isopropyl alcohol or window cleaner and a clean cloth to remove any wax, oil, dust, and debris from the existing manufacturer label.
- Allow the isopropyl alcohol or window cleaner to fully evaporate before applying the overlay label.
- Apply appropriate overlay label to the manufacturer label in the original position and with the same text orientation to correct the information (Figure 2).
- Apply pressure to the entire surface of the manufacturer overlay label with firm overlapping strokes removing all wrinkles and air bubbles. Using a tool such as a squeegee is allowed.
Loading...
Reload document 
Open in new tab
Chronology :
- On February 26, 2024, Stellantis Europe S.p.A Customer Experience (“CX”) was notified of a potential issue on certain vehicles related to missing Gross Vehicle Weight Rating, tire size, and rim size on the manufacturer label.
- From February 27, 2024, through March 8, 2024, Stellantis Europe S.p.A CX reviewed production data and assembly plant records and determined that some vehicles were built with missing manufacturer label information and determined the scope of vehicles affected.
- On March 7, 2024, the Stellantis Europe S.p.A organization recognized that the manufacturer label was missing required information on certain vehicles, potentially resulting in a noncompliance with FMVSS No. 110.
- On March 12, 2024, Stellantis Europe S.p.A determined, through the Vehicle Regulations Committee, to conduct a voluntary safety recall of the affected vehicles.
2 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| ALFA ROMEO | TONALE | 2024 |
| DODGE | HORNET | 2024 |
6 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-24V209-3492.PDF 215.598KB
Recall Acknowledgement
RCAK-24V209-3297.pdf 645.384KB
Manufacturer Notices(to Dealers,etc)
Loading...
Manufacturer Notices(to Dealers,etc)
Loading...
Remedy Instructions and TSB
RCRIT-24V209-5836.pdf 690.093KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-24V209-6760.pdf 550.148KB
Loading...
Latest Recalls Documents
- [Easy to Use--Work out of the box] + [FOXWELL 2025 New Version] FOXWELL NT604 Elite scan tool is the 2025 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like ABS SRS engine and transmission.The NT604 Elite obd2 scanner diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the car warning light after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even if you replace the new airbag.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix & View Live Data] - Much more than a car code reader, BlueDriver is a diagnostic tool. You’ll get unlimited repair reports with possible causes and fixes, plus real-time health monitoring while you drive with the live data feature.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- 📢【NOTE: Please Check Compatibility First】➊ Autel AL619 is a basic OBD2 code reader that works with limited Specific Vehicle models from 1996-2015. ➋ All the functions are NOT universal for each vehicle, please contact us to check the compatibility before ordering via 📩AutelStoreOnline @ outlook . com📩, offer us your detailed Car Model, Year, VIN# (IMPORTANT), and the functions you need, and you will get the available solution in 12 hours.
- 🎉【2025 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.🚦📢Kindly note: AL619 only supports 2015 or pre-2015 cars. And services are not universal, please send us your car VIN# to check the compatibility before ordering.📩AutelStoreOnline @ outlook . com📩.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 AutelStoreOnline @ outlook . com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 【UPGRADE OF NT604-POWERFUL 5 RESETS】Wanna to do maintenance service for your car however the basic 4 system scanner tool can't do it? Then FOXWELL NT614 Elite-the upgraded version of nt604, was born for providing you with 5 special functions-ABS Bleeding/Oil Reset/SAS Calibration/EPB Reset/Throttle Reset. These functions are enough for your daily needs. No need to buy those 300-600 dollors obd2 scanner. Saving your unnecessary repair fee with FOXWELL nt614 car scanner diagnostic tool!
- 【ENGINE/ABS/SRS/TRANSMISSION CODE READER】Don't know what's wrong with your car when the warning light of ABS, transmission, SRS, Engine flashes? NT614 Elite obd2 scanner can pinpoint the problem components. It boasts many functions of engine, abs, srs and transmission such as read & erase fault codes and grapgh live data like engine temp, wheel speed sensor, read transmission temperature, etc. Compared with car repairs, using foxwell nt614 elite is more convenient and a-ffordable.
- 【Best Bang For Your Buck!-FOXWELL NT614 Elite】1. 2025 New software-faster than old one. 2. One click lifetime WIFI f-ree update, no need to use the annoying Micro SD card. 3. New Update-No need to register on the FOXWELL website before use，more convenient! 4. More intuitive viewing with new interface, you can find I/M, Battery Test, DTC Lookup directly.
- 【ABS BLEEDING OBD SCANNER】Do you always feel the brake pedal was slowly sinking to floor or it's loose after doing a complete front & rear brake job? And then you need to take more time than normal to stop your car, which is very dangerous. That's because when you open the brake system to replace components, air gets inside. To get a firm brake pedal, the air need to be removed by bleeding the brakes. NT614 Elite odb2 scanner can do ABS BLEEDING perfectly for your cars.
- 【SMART AUTOVIN & LIFETIME F-REE WIFI UPDATE & PERFECT GIFT CHOICE】With the fantastic AUTOVIN function, this nt614 scan tool can get your VIN and vehicle info rapidly. No need to spend much time in finding your VIN and input it one by one. Also, the lifetime f-ree wifi update is provided for more vehicle coverage, bug fixes, newly added parameters. SAVE AT LEAST 1000+ PER YEAR. And this automotive scanner is a best gift for your Dad, Husband, Boyfriend and Handy Men.
- 【Professional 4 Systems Diagnostics】For DIYers addressing typical concerns like engine, transmission, ABS, and SRS, the TOPDON AD500 vehicle scanner provides specialized diagnostic solutions. It effortlessly interprets and eliminates fault codes and scrutinizes data streams, ensuring the prompt detection of issues.
- 【6 Reset Functions】The AD500 car diagnostic tool offers essential features like Oil Reset, Throttle Adaptation, SAS/TPMS/BMS/EPB Reset. Easily reset oil change indicators, fine-tune throttle response, and recalibrate steering angle sensors for optimal vehicle performance and maintenance convenience.
- 【Works Easier with AD500】The AD500 scanner combines a 5” touchscreen with buttons for easier and seamless operation. Elevate your diagnostic experience with DTC Lookup, Diagnostic data record, and printing diagnostic reports via email. Stay up to date with lifetime free upgrades via Wi-Fi, ensuring your tool is always equipped with the latest features.
- 【Fast Diagnostics, Instant Support】With AutoVIN, instantly obtain crucial vehicle details for expedited diagnostic processes. The AD500 code reader not only facilitates data stream recording for later review but also acts as a battery voltage monitor, providing valuable insights into your vehicle's battery health. If you encounter any diagnostic hurdles, share feedback with TOPDON for prompt professional support.
- 【Upgraded ArtiDiag500 for Peak Performance】Experience enhanced performance with the upgraded AD500 diagnostic tool, boasting a 4-core 1.5GHz CPU, 2GB RAM + 32GB ROM, and seamless operation with Android 11.0. Enjoy extended battery life with its 3350mAh capacity. Plus, benefit from TOPDON's 1-year quality backup for added peace of mind.
- Next-level OBD2 SRS ABS Scanner - Beyond the basic NT301 FOXWELL Scanner, this car obd2 scanners takes OBD-II diagnostics to the next level by in-depth insights on reading ABS SRS DTCs, display the live data: wheel speed sensor, Airbag issues, wiring faults, clear the ABS error codes after the car faults repaired, etc... NOTE: This code reader CANNOT reset/erase any Airbag error codes or crash codes. Tips: Coverage will be vary on different car conditions, please check the functions coverage BEFORE purchasing. Supports WiFi updates. No registration or subscription required.
- Full-Feature ABS Diagnostics - Real-time tracking of wheel speed sensors, brake force distribution, and brake pressure, shown in 2 in 1 dynamic graphs for analysis. Easily read ABS trouble codes, view freeze frame data, and monitor ABS performance under emergency braking or slippery road conditions. This ABS scan tool also provides alerts for potential problems. Note: All vehicle issues must be properly repaired before clearing codes.
- Top ABS Brake Bleeding Scan Tool - After replacing the ABS pump or adding brake fluid, air can enter the ABS module, causing the pedal to feel weak or slow to return. This ABS bleed scan tool will restore your brake pedal’s firmness by efficiently removing air from the ABS module. NOTE: Supports ABS bleeding only on certain vehicles. For vehicle coverage, check the FOXWELL Diagnostic Coverage List under Support on the official site.
- Basic Check Engine Code Reader - This obd2 scanner diagnostic tool also can diagnose CEL, read OBD-II modules instantly, display the live data with graph (engine RPM, coolant temp, fuel trim, sensor readings), locate bad sensors and indicate I/M readiness status before the annual inspection. Helps reduce risks and maintain top vehicle performance.
- User-Friendly & Budget-Friendly - Features a 2.8" LCD screen, enjoy software updates without subscription for newer vehicle models(Any more issues about update, please let us know). This code scanner comes with a sturdy case for easy carrying. The code reader for cars and trucks will also save diagnostic data to avoid unnecessary diagnostic costs when you must to find the professional mechanic to fix the car faults instead of addressing them by yourself.
- [Brand-New ArtiDiag500] We've got everything you're looking for! Forget basic OBD2 scanners; TOPDON's ArtiDiag500 car scanner offers more. The all-new ArtiDiag500 not only includes full OBD2 functions and 4-system diagnostics but also provides DIYers with 6 maintenance services. The brand-new, cost effective AD500 is back in full swing!
- [4-System Diagnostics] DIY enthusiasts, take notice! Will these 4-system diagnostics be the treasure you've been seeking? The ArtiDiag500 code reader offers in-depth testing for the engine, transmission, ABS, and SRS systems, reading fault codes and data streams. It also visualizes real-time data in chart form, simplifying complex data for storage and future playback, aiding DIY users in problem detection.
- [6 Reset Functions] Hey, hang tight for a moment. With these 6 reset functions, the ArtiDiag500 has got you covered. It offers throttle adaptation along with reset capabilities for Oil, SAS, TPMS, BMS, and EPB. Seamlessly aligning the throttle, battery, tires, and brake pads with your vehicle, it also adjusts the steering angle and turns off the oil light. Looking to restore your car to its original condition? Look no further than the ArtiDiag500.
- [Multiple Functions] The Smart AutoVIN of this TOPDON OBD2 scanner keeps track of your manual selections for vehicle make, model, and year and directs you to the suitable diagnostics. Max 4 Live Data streams integrated for much easier data processing. Diagnostic feedback online with this diagnostic tool to help you get tough repair operations well-completed. Real-time car battery voltage monitoring identifies probable vehicle defects.
- [Global Support] Rest assured about compatibility with your vehicle and language – ArtiDiag500 currently supports 67+ car brands, 10,000+ models, covering most vehicles worldwide, and is available in 12 languages. Whether it's for your car or preferred language, there's an ideal choice for you. Plus, it's fully compatible with Android 11 for smoother use.
- 【ENHANCED DIAGNOSTIC SCAN TOOL WITH ABS/SRS/ECM/TCM SYSTEMS】 The XpertAuto S515 OBD2 scan diagnostic tool helps diagnose issues with ABS, SRS, ECM, and TCM systems. This car diagnostic scan tool reads and clears error codes, reads data streams, retrieves ECU info,and quickly locates ABS, SRS, ECM, TCM problems
- 【8 HOT RESET SERVICES】The XpertAuto S515 professional level car code reader and reset tool offers 8 hot reset services, including oil, airbag, SAS, EPB, ETS, ABS bleed, DPF regeneration and battery reset. This car code reader is perfect for thoughtful and attentive service, covering everything from routine maintenance and warning light removal to auto part replacement and more
- 【PROFESSIONAL-GRADE OBD2 SCANNER】 The car scanner diagnostic tool delivers professional-grade functionality at a consumer price. It covers all the essentials: Read Codes, Erase Fault Codes, MIL Fault Indicator Light, Live Data, EVAP System Test, View Freeze-Frame, Vehicle Info, I/M Readiness, and DTCs Look-up, ensuring accurate diagnosis and peace of mind
- 【AUTOSEARCH VIN - SCREENSHOT & RECORDING】 The Vehicle Code Reader features intelligent Auto VIN technology for fast and accurate one-touch vehicle identification. It scans ECUs, collects vehicle information and performs diagnostics on selected systems. This car diagnostic tool comes with unique screenshot and video recording function, allowing you to save extensive data effortlessly
- 【MULTIPLE DISPLAY OF LIVE DATA】 The car diagnostic tool can display data streams through numbers, images, and a combination of both. It also allows comparison with historical data for a comprehensive view of your car's condition and changes at a glance. Car diagnostic reports can be easily saved, shared, printed, and emailed
- 【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! Also, the lifetime update is provided for more vehicle coverage, bug fixes. SAVE AT LEAST $1000+ PER YEAR!Get LAUNCH CRP123 V2.0 Elite car diagnostic scanner and give your lover a surprise!*R each us to Get the Extra Gifts :Protective Case Storage Bag.
- 【2025 Newly Added 3 Reset Functions】CRP123 V2.0 obd2 scanner with upgrades it offers Throttle Adaptation,Oil Reset and SAS Reset functions for FREE now!! Optimize your engine performance with Throttle Adaptation, reset your oil life system with ease to save time and money on maintenance, and enhance your vehicle's handling and safety with SAS Reset.Covering more daily repairs,become the most cost-effective product in its price range,save your time and money!
- 【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 V2.0 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- 【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and V-ehicle Information, O2 Sensor Test, EVAP Test of F-uel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 v2.0 obd2 scanner can not only reveal what error codes your car is producing, but also erase your v-ehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- 【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.Large size Color Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
- All New AD610 Pro - This remarkable tool has entirely new technology. Unlike other OBD2 scanners that merely support USB upgrades on PC and demand registration, ours offers WiFi updates without any registration requirements, thus saving 90% of the time it takes. Additionally, the operating speed of our new software has increased by 30% and the vehicles' compatibility has risen by 20%. The compatibility depends year and model, please inform VIN for compatible check.
- ABS Diagnosis & Reset - Effectively read and clear ABS error codes or reset ABS-related sensors after repairs. Addresses issues such as front or rear wheel speed sensor failure, sensor voltage irregularities, steering angle sensor faults, yaw rate, or G sensor malfunctions. Ensure safe driving with reliable system performance.
- SRS Diagnosis & Reset - Read and clear SRS error codes or reset SRS-related sensors after repairs. Resolves issues like crash data recorded on the driver side (airbag replacement required), occupant classification system defects, or seat track position sensor malfunctions. Helps avoid airbag failure in an accident.
- Optimal ABS Bleed, Smooth Braking - When there's air in the ABS, it affects braking performance. Our tool helps auto bleed the brake system by purging the air, ensuring no air bubbles in the brake lines, for proper operation and optimal performance. This maintenance task is typically done when replacing brake fluid or servicing brake components, to ensure braking system stability and reliability. Note: this feature is not compatible with vehicles that only support manual bleeding.
- SAS Calibration Essential - Enjoy precision steering and enhanced safety through our SAS calibration feature. By ensuring accurate alignment of your vehicle's steering angle sensor (SAS), SAS calibration delivers precise control, eliminates steering drift, and prevents uneven tire wear. Improve handling and maneuverability on the road, even in challenging conditions, while driving with confidence knowing that your steering system is finely tuned for maximum performance and safety.
SEOCONTENT-START
03/20/2024
_____________________________________________________________________
New Safety Recall Advanced Communication – 32B
FCA US LLC (FCA US) has announced a safety recall on certain 2024 Model Year (GG) Dodge Hornet and (GC) Alfa Romeo Tonale vehicles.
REASON FOR THIS SAFETY RECALL
Some of the above vehicles may have been built with a manufacturer label that is missing rim and tire size designation information. A driver may use an incorrect rim size, which can increase the risk of a crash.
Federal Motor Vehicle Safety Standard (FMVSS) 571.110 S4.3.3 “Additional Labeling Information for Vehicles Other Than Passenger Cars” requires “Each vehicle shall show the size designation and, if applicable, the type designation of rims (not necessarily those on the vehicle) appropriate for the tire appropriate for use on that vehicle, including the tire installed as original equipment on the vehicle by the vehicle manufacturer” to be printed on the manufacturer label. Subject vehicles are equipped with a manufacturer label that is missing the size designation of the rims.
SERVICE ACTION
FCA US will conduct a voluntary safety recall to apply a manufacturer label overlay with corrected information. The remedy for this condition is not currently available. Dealers will be notified of the launch of this safety recall by way of established communication methods. This recall is estimated to launch in 2nd Quarter of 2024.
We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries regarding involved vehicles.
Customer Services Field Operations
FCA US LLC
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-209
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Chrysler (FCA US, LLC) (Stellantis) MAR 19, 2024 NHTSA Recall No. : 24V-209 Manufacturer Recall No. : 32B Manufacturer Information :
Manufacturer Name : Chrysler (FCA US, LLC) (Stellantis) Address : 800 Chrysler Drive
CIMS 482-00-91 Auburn Hills MI 48326-2757
Company phone : 1-800-853-1403 Population :
Number of potentially involved : 1,201 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2024-2024 Dodge Hornet Vehicle Type : Body Style : SUV Power Train : NR
Descriptive Information : Some 2024 MY Dodge Hornet vehicles may have been built with a manufacturer label that is missing rim and tire size designation information. The suspect period began on January 15, 2024, when MY24 vehicle production began, and ended on February 13, 2024, when the label was updated to reflect the correct content. Vehicle assembly plant records were used to determine the suspect period.
Similar vehicles not included in this recall were built after the suspect period. The total affected vehicles for this model is 1,189.
Production Dates : JAN 15, 2024 – FEB 13, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 24V-209 Page 2 Vehicle 2 : 2024-2024 Alfa Romeo Tonale Vehicle Type : Body Style : SUV Power Train : NR
Descriptive Information : Some 2024 MY Alfa Romeo Tonale vehicles may have been built with a manufacturer label with missing rim and tire size designation information. The suspect period began on January 15, 2024, when labels with missing information were introduced into vehicle production, and ended on February 10, 2024, when the label was updated to reflect the correct content. Vehicle assembly plant records were used to determine the suspect period.
Similar vehicles not included in this recall were built after the suspect period. The total affected vehicles for this model is 12.
Production Dates : JAN 15, 2024 – FEB 10, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : Federal Motor Vehicle Safety Standard (“FMVSS”) 571.110 S4.3.3 “Additional Labeling Information for Vehicles Other Than Passenger Cars” requires “Each vehicle shall show the size designation and, if applicable, the type designation of rims (not necessarily those on the vehicle) appropriate for the tire appropriate for use on that vehicle, including the tire installed as original equipment on the vehicle by the vehicle manufacturer” to be printed on the manufacturer label. Subject vehicles are equipped with a manufacturer label that is missing the size designation of the rims. FMVSS 1 : 110 – Tire selection and rims FMVSS 2 : NR
Description of the Safety Risk : A driver may use an incorrect rim size, which can increase the risk of a crash.
Description of the Cause : NR Identification of Any Warning
that can Occur : N/A Involved Components : The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-209 Page 3 Component Name 1 : Manufacturer Label Component Description : Manufacturer Label Component Part Number : 50573783 Supplier Identification : Component Manufacturer
Name : Component manufactured by FCA Address : NR
NR
Country : NR Chronology :
• On February 26, 2024, Stellantis Europe S.p.A Customer Experience (“CX”) was notified of a potential issue on certain vehicles related to missing Gross Vehicle Weight Rating, tire size, and rim size on the manufacturer label. • From February 27, 2024, through March 8, 2024, Stellantis Europe S.p.A CX reviewed production data and assembly plant records and determined that some vehicles were built with missing manufacturer label information and determined the scope of vehicles affected. • On March 7, 2024, the Stellantis Europe S.p.A organization recognized that the manufacturer label was missing required information on certain vehicles, potentially resulting in a noncompliance with FMVSS No. 110. • On March 12, 2024, Stellantis Europe S.p.A determined, through the Vehicle Regulations Committee, to conduct a voluntary safety recall of the affected vehicles. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-209
Page 4
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Remedy :
Description of Remedy Program : FCA US will conduct a voluntary safety recall to apply a manufacturer label
overlay with corrected information.
FCA US has a longstanding policy and practice of reimbursing owners who have incurred the cost of repairing a problem that subsequently becomes the subject of a field action. To ensure consistency, FCA US, as part of the owner letter, will request that customers send the original receipt and/or other adequate proof of payment to the company for confirmation of the expense.
How Remedy Component Differs from Recalled Component : Identify How/When Recall Condition was Corrected in Production :
This recall is not related to a part defect, but rather a manufacturing issue where the manufacturer label printed on the vehicle assembly was missing information.
NR Recall Schedule :
Description of Recall Schedule : **03/19/2024: FCA US will notify dealers and begin notifying owners on
or about 05/08/2024.
Planned Dealer Notification Date : MAY 08, 2024 – MAY 08, 2024
Planned Owner Notification Date : MAY 08, 2024 – MAY 08, 2024
* NR – Not Reported
**************************************************************************************************************
03/26/2024
_____________________________________________________________________
New Safety Recall Advanced Communication – 32B
FCA US LLC (FCA US) has announced a safety recall on certain 2024 Model Year
(GG) Dodge Hornet and (GC) Alfa Romeo Tonale vehicles.
VINs identified as being involved in this campaign are currently live and searchable.
Stop sale is in effect for the above-identified vehicles.
Vehicles impacted by a stop sale are eligible for reimbursement allowance through the
Recall Floorplan Reimbursement Policy (RFPRP), which can be requested upon recall
claim submission.
REASON FOR THIS SAFETY RECALL
Some of the above vehicles may have been built with a manufacturer label that is
missing rim and tire size designation information. A driver may use an incorrect rim size,
which can increase the risk of a crash.
Federal Motor Vehicle Safety Standard (FMVSS) 571.110 S4.3.3 “Additional Labeling
Information for Vehicles Other Than Passenger Cars” requires “Each vehicle shall show
the size designation and, if applicable, the type designation of rims (not necessarily
those on the vehicle) appropriate for the tire appropriate for use on that vehicle,
including the tire installed as original equipment on the vehicle by the vehicle
manufacturer” to be printed on the manufacturer label. Subject vehicles are equipped
with a manufacturer label that is missing the size designation of the rims.
SERVICE ACTION
FCA US will conduct a voluntary safety recall to apply a manufacturer label overlay with
corrected information. The remedy for this condition is not currently available. Dealers
will be notified of the launch of this safety recall by way of established communication
methods. This recall is estimated to launch in 2nd Quarter of 2024.
We ask that you please take the time to ensure that your personnel are aware of this
communication and are prepared to execute a customer friendly process for inquiries
regarding involved vehicles.
IMPORTANT: Some of the involved vehicles may be in dealer new vehicle
inventory. Federal law requires you to complete this recall service on these
vehicles before retail delivery. Violation of this requirement by a dealer could
result in a civil penalty of up to $27,168 per vehicle. Involved vehicles can be
determined by using the VIP inquiry process.
Customer Services Field Operations
FCA US LLC
**************************************************************************************************************
SAFETY RECALL
NORTH AMERICA
Manufacturer label
Reference: 32B / NHTSA 24V-209
FCA US LLC
_________________________________________________________
Strictly respect STELLANTIS Group safety, cleanliness, and environmental instructions for any vehicle service.
Document exclusively reserved for dealer information. Internal distribution to be ensured by dealer.
Reproduction forbidden without the written agreement of STELLANTIS Group. (C) 2024 STELLANTIS Group. All Rights Reserved (tdb)
1/4
Remedy available for
2024 (GG) Dodge® Hornet
Remedy available for
2024 (GC) Alfa Romeo® Tonale
Template Version 1.0
Revision Edition Detail
0 March 2024 Initial Version.
SYMPTOM DESCRIPTION
About 1,200 of the above vehicles may have been built
with a manufacturer label that is missing rim and tire
size designation information. Relying on incorrect rim
and tire size designation information can result in the
use of an incorrect wheel, which can increase the risk
of a crash.
Federal Motor Vehicle Safety Standard (FMVSS)
571.110 S4.3.3 “Additional Labeling Information for
Vehicles Other Than Passenger Cars” requires “Each
vehicle shall show the size designation and, if
applicable, the type designation of rims (not
necessarily those on the vehicle) appropriate for the
tire appropriate for use on that vehicle, including the
tire installed as original equipment on the vehicle by
the vehicle manufacturer” to be printed on the
manufacturer label. Subject vehicles are equipped
with a manufacturer label that is missing the size
designation of the rims.
SCOPE
NOTE: Some vehicles above may have been
identified as not involved in this recall and therefore
have been excluded from this recall.
IMPORTANT:
• Some of the involved vehicles may be in dealer
new vehicle inventory. Federal law requires you
to complete this recall service on these vehicles
before retail delivery. Violation of this requirement
by a dealer could result in a civil penalty of up to
$27,168 per vehicle.
• Some of the involved vehicles may be in dealer
used vehicle inventory. Dealers should complete
this recall service on these vehicles before retail
delivery.
• Dealers should also perform this recall on vehicles
in for service.
Involved vehicles can be determined by using the
VIP inquiry process.
REPAIR TO BE PERFORMED
Install an overlay label to the Manufacturer label.
ALTERNATE TRANSPORTATION
Dealers should attempt to minimize customer
inconvenience by placing the owner in a loaner vehicle
if the vehicle must be held overnight.
COMPLETION REPORTING / REIMBURSEMENT
Claims for vehicles that have been serviced must be
submitted on the DealerCONNECT Claim Entry
Screen located on the Service tab. Claims paid will
be used by FCA to record recall service completions
and provide dealer payments.
Use the following labor operation numbers and time
allowances:
Labor Description Number Hrs
Apply Overlay Label to the
Manufacturer Label
23-32-B1-82 0.2
Labor Description Number Allowance
Floor Plan Reimbursement 95-95-95-97
Calculate
See Below
Floor Plan Reimbursement represents the vehicle’s
average daily allowance (see table below) multiplied
by the number of days the vehicle was in dealer
inventory and not available for sale. This
reimbursement is limited to the number of days from
the date of the stop sale to the date that the remedy
was made available. Note: If the vehicle was received
by your dealership (KZX date) AFTER the stop sale
date, you will use the KZX date instead of the stop sale
date. For this Recall, the stop sale was initiated on
03/26/2024 and the remedy was made available on
03/28/2024, therefore, the number of days cannot
exceed 2 days.
SAFETY RECALL
NORTH AMERICA
Manufacturer label
Reference: 32B / NHTSA 24V-209 FCA US LLC
_________________________________________________________
Strictly respect STELLANTIS Group safety, cleanliness, and environmental instructions for any vehicle service.
Document exclusively reserved for dealer information. Internal distribution to be ensured by dealer.
Reproduction forbidden without the written agreement of STELLANTIS Group. (C) 2024 STELLANTIS Group. All Rights Reserved (tdb)
2/4
Vehicle
Average Daily
Allowance
(GG) Dodge Hornet
(GC) Alfa Romeo Tonale
NOTE: See the Warranty Administration Manual,
Recall Claim Processing Section, for complete
recall claim processing instructions.
PARTS INFORMATION
Labels will be sent to the owners in the owner letter
and mailed to dealers based on unsold VINs. There
are no part numbers for the labels. Replacement
labels can be ordering via DealerConnect.
Process Steps to Order a Replacement
Manufacturer Overlay Label:
1. Access the “DealerCONNECT” website.
2. Select the “Marketing” link in the header of
DealerCONNECT.
3. Locate the “Product Information” section heading
on the Marketing page.
4. Select the “Literature and Merchandising Materials”
link in the product information section.
5. Locate the “MOPAR” section heading on the
Literature and Merchandising Materials page.
6. Select the “Recall Labels / Cards” link listed in the
MOPAR section.
7. Select Item > Update Cart > Submit Order.
PARTS RETURN
No parts return required for this campaign.
SPECIAL TOOLS
No Special Tools are required to perform this service
procedure.
DEALER NOTIFICATION
To view this notification on DealerCONNECT, select
“Global Recall System” on the Service tab, then click
on the description of this notification.
OWNER NOTIFICATION / SERVICE SCHEDULING
All involved vehicle owners known to FCA are being
notified of the service requirement by first class mail.
They are requested to schedule appointments for this
service with their dealers. A generic copy of the owner
letter is attached.
VEHICLE LISTS, GLOBAL RECALL SYSTEM, VIP
AND DEALER FOLLOW UP
All involved vehicles have been entered into the
DealerCONNECT Global Recall System (GRS) and
Vehicle Information Plus (VIP) for dealer inquiry as
needed.
GRS provides involved dealers with an updated VIN
list of their incomplete vehicles. The owner’s name,
address and phone number are listed if known.
Completed vehicles are removed from GRS within
several days of repair claim submission.
To use this system, click on the “Service” tab and then
click on “Global Recall System.” Your dealer’s VIN
list for each recall displayed can be sorted by: those
vehicles that were unsold at recall launch, those with
a phone number, city, zip code, or VIN sequence.
Dealers must perform this repair on all unsold
vehicles before retail delivery. Dealers should also
use the VIN list to follow up with all owners to schedule
appointments for this repair.
Recall VIN lists may contain confidential, restricted
owner name and address information that was
obtained from the Department of Motor Vehicles of
various states. Use of this information is permitted for
this recall only and is strictly prohibited from all other
use.
ADDITIONAL INFORMATION
If you have any questions or need assistance in
completing this action, please contact your Service
and Parts District Manager.
Customer Services / Field Operations
FCA US LLC.
SAFETY RECALL
NORTH AMERICA
Manufacturer label
Reference: 32B / NHTSA 24V-209
FCA US LLC
_________________________________________________________
Strictly respect STELLANTIS Group safety, cleanliness, and environmental instructions for any vehicle service.
Document exclusively reserved for dealer information. Internal distribution to be ensured by dealer.
Reproduction forbidden without the written agreement of STELLANTIS Group. (C) 2024 STELLANTIS Group. All Rights Reserved (tdb)
3/4
SERVICE PROCEDURE
1. Locate the manufacturer label on the vehicle driver side B-pillar (Figure 1).
2. Obtain the NEW manufacturer overlay label for the vehicle and verify the overlay label is appropriate for the
vehicle based on engine and tire size the vehicle is equipped with.
Overlay
1
If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 225/55R18 tires
Use overlay with GVWR of 2420 kg/5335 lb and 225/55R18 tires
Overlay
2
If vehicle is equipped with a 2.0L Engine and 225/55R18 tires
Use overlay with GVWR of 2250 kg/4960 lb and 225/55R18 tires
Overlay
3
If vehicle is equipped with a 2.0L Engine and 235/40R20 tires
Use overlay with GVWR of 2250 kg/4960 lb and 235/40R20 tires
Overlay
4
If vehicle is equipped with a 2.0L Engine and 215/60R17 tires
Use overlay with GVWR of 2250 kg/4960 lb and 215/60R17 tires
Overlay
5
If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 235/40R20 tires
Use overlay with GVWR of 2420 kg/5335 lb and 235/40R20 tires
Overlay
6
If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 235/45R19 tires
Use overlay with GVWR of 2420 kg/5335 lb and 235/45R19 tires
3. Use isopropyl alcohol or window cleaner and a clean cloth to remove any wax, oil, dust, and debris from the
existing manufacturer label.
Figure 1 – Locate Manufacturer Label Location
SAFETY RECALL
NORTH AMERICA
Manufacturer label
Reference: 32B / NHTSA 24V-209
FCA US LLC
_________________________________________________________
Strictly respect STELLANTIS Group safety, cleanliness, and environmental instructions for any vehicle service.
Document exclusively reserved for dealer information. Internal distribution to be ensured by dealer.
Reproduction forbidden without the written agreement of STELLANTIS Group. (C) 2024 STELLANTIS Group. All Rights Reserved (tdb)
4/4
4. Allow the isopropyl alcohol or window cleaner to fully evaporate before applying the overlay label.
5. Apply appropriate overlay label to the manufacturer label in the original position and with the same text
orientation to correct the information (Figure 2).
6. Apply pressure to the entire surface of the manufacturer overlay label with firm overlapping strokes removing
all wrinkles and air bubbles. Using a tool such as a squeegee is allowed.
7. Return the vehicle to the customer or inventory.
Figure 2 – Install Manufacturer Overlay Label
Overlay 1, 2, 3, 4, 5, 6
Overlay
1
Overlay
2
Overlay
3
Overlay
4
Overlay
5
Overlay
6
This notice applies to your vehicle,
32B/NHTSA 24V-209
YOUR SCHEDULING OPTIONS
1. RECOMMENDED OPTION
Call your authorized Chrysler /
Dodge / Jeep® / RAM Dealership.
2. Call the FCA Recall Assistance
Center at 1-800-853-1403. An
agent can confirm part availability
and help schedule an appointment.
3. Visit recalls.mopar.com, scan the
QR code below, or download the
Mopar Owner’s Companion App.
Get access to recall notifications, locate
your nearest dealer, and more through
this website or Mopar Owner’s
Companion App. You will be asked to
provide your Vehicle Identification
Number (VIN) to protect and verify
your identity. The last eight characters
of your VIN are provided above.
DEALERSHIP INSTRUCTIONS
Please reference Safety Recall 32B.
IMPORTANT SAFETY RECALL
Manufacturer label
Dear [Name],
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
FCA US LLC has decided that certain [2024 model year (GG) Dodge Hornet] vehicles fail to
conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 110 – Tire selection and rims.
It is extremely important to take steps now to repair your vehicle to ensure the safety of you and
your passengers.
WHY DOES MY VEHICLE NEED REPAIRS?
Your vehicle [1] may have been built with a manufacturer label that is missing rim and tire size
designation information. Relying on incorrect rim and tire size designation information can
result in the use of an incorrect wheel, which can increase the risk of a crash.
Federal Motor Vehicle Safety Standard (FMVSS) 571.110 S4.3.3 “Additional Labeling
Information for Vehicles Other Than Passenger Cars” requires “Each vehicle shall show the size
designation and, if applicable, the type designation of rims (not necessarily those on the vehicle)
appropriate for the tire appropriate for use on that vehicle, including the tire installed as original
equipment on the vehicle by the vehicle manufacturer” to be printed on the manufacturer label.
Subject vehicles are equipped with a manufacturer label that is missing the size designation of
the rims.
HOW DO I RESOLVE THIS IMPORTANT SAFETY ISSUE?
You may choose to apply the enclosed overlay label using the instruction as described on the
enclosed instructions letter. Or if you prefer not to install the label yourself, simply contact your
dealer to schedule a service appointment. FCA US LLC will repair your vehicle [2] free of charge
(parts and labor). To do this, your dealer will apply the manufacturer label overlay with
corrected information. The estimated repair time is 20 minutes. In addition, your dealer
will require your vehicle for proper check-in, preparation, and check-out during your visit,
which require more time. Your time is important to us, so we recommend that you schedule a
service appointment to minimize your inconvenience. Please bring the enclosed overlay label
and this letter with you to your dealership.
TO SCHEDULE YOUR FREE REPAIR,
CALL YOUR CHRYSLER, DODGE, JEEP OR RAM DEALER TODAY
WHAT IF I ALREADY PAID TO HAVE THIS REPAIR COMPLETED?
If you have already experienced this specific condition and have paid to have it repaired, you
may visit www.fcarecallreimbursement.com to submit your reimbursement request online. [3]
Once we receive and verify the required documents, reimbursement will be sent to you within
60 days. If you have had previous repairs performed and/or already received reimbursement,
you may still need to have the recall repair performed.
We apologize for any inconvenience, but are sincerely concerned about your safety. Thank you
for your attention to this important matter.
Customer Assistance/Field Operations
FCA US LLC
[Model Year and Model]
VIN XXXXXXXXXXXXXXXXX
LOGO
VEHICLE PICTURE
QR Code
[1] If you no longer own this vehicle, please help us update our records. Call the FCA Recall Assistance Center at 1-800-853-1403 to update your information.
[2] If your dealer fails or is unable to remedy this defect without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway
Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC 20590, or you can call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-
9153), or go to safercar.gov.
[3] You can also mail in your original receipts and proof of payment to the following address for reimbursement consideration: FCA Customer Assistance, P.O. Box 21-8004,
Auburn Hills, MI 48321-8007, Attention: Recall Reimbursement.
Note to lessors receiving this recall notice: Federal regulation requires that you forward this recall notice to the lessee within 10 days.
Mr. Mrs. Customer
1234 Main Street
Hometown, MI 48371
This notice applies to your vehicle,
32B/NHTSA 24V-209
YOUR SCHEDULING OPTIONS
1. RECOMMENDED OPTION
Call your authorized Alfa Romeo
dealership.
2. Call Alfa Romeo Premium Care at
1-866-932-3881. An agent can
confirm part availability and help
schedule an appointment.
3. Visit recalls.mopar.com, scan the
QR code below, or download the
Mopar Owner’s Companion App.
Get access to recall notifications, locate
your Alfa Romeo dealership, and more
through this website or Mopar Owner’s
Companion App. You will be asked to
provide your Vehicle Identification
Number (VIN) to protect and verify
your identity. The last eight characters
of your VIN are provided above.
DEALERSHIP INSTRUCTIONS
Please reference Safety Recall 32B.
IMPORTANT SAFETY RECALL
Manufacturer label
Dear [Name],
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
FCA US LLC has decided that certain [2024 model year (GC) Alfa Romeo Tonale] vehicles fail
to conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 110 – Tire selection and
rims.
It is extremely important to take steps now to repair your vehicle to ensure the safety of you and
your passengers.
WHY DOES MY VEHICLE NEED REPAIRS?
Your vehicle [1] may have been built with a manufacturer label that is missing rim and tire size
designation information. Relying on incorrect rim and tire size designation information can
result in the use of an incorrect wheel, which can increase the risk of a crash.
Federal Motor Vehicle Safety Standard (FMVSS) 571.110 S4.3.3 “Additional Labeling
Information for Vehicles Other Than Passenger Cars” requires “Each vehicle shall show the size
designation and, if applicable, the type designation of rims (not necessarily those on the vehicle)
appropriate for the tire appropriate for use on that vehicle, including the tire installed as original
equipment on the vehicle by the vehicle manufacturer” to be printed on the manufacturer label.
Subject vehicles are equipped with a manufacturer label that is missing the size designation of
the rims.
HOW DO I RESOLVE THIS IMPORTANT SAFETY ISSUE?
You may choose to apply the enclosed overlay label using the instruction as described on the
enclosed instructions letter. Or if you prefer not to install the label yourself, simply contact your
dealer to schedule a service appointment. FCA US LLC will repair your vehicle [2] free of charge
(parts and labor). To do this, your dealer will apply the manufacturer label overlay with
corrected information. The estimated repair time is 20 minutes. In addition, your dealer
will require your vehicle for proper check-in, preparation, and check-out during your visit,
which require more time. Your time is important to us, so we recommend that you schedule a
service appointment to minimize your inconvenience. Please bring the enclosed overlay label
and this letter with you to your dealership.
TO SCHEDULE YOUR FREE REPAIR,
CALL YOUR ALFA ROMEO DEALER TODAY
WHAT IF I ALREADY PAID TO HAVE THIS REPAIR COMPLETED?
If you have already experienced this specific condition and have paid to have it repaired, you
may visit www.fcarecallreimbursement.com to submit your reimbursement request online. [3]
Once we receive and verify the required documents, reimbursement will be sent to you within
60 days. If you have had previous repairs performed and/or already received reimbursement,
you may still need to have the recall repair performed.
We apologize for any inconvenience, but are sincerely concerned about your safety. Thank you
for your attention to this important matter.
Customer Assistance/Field Operations
[Model Year and Model]
VIN XXXXXXXXXXXXXXXXX
LOGO
VEHICLE PICTURE
QR Code
FCA US LLC
Mr. Mrs. Customer
1234 Main Street
Hometown, MI 48371
SAFETY RECALL 32B – MANUFACTURER LABEL
OWNER INSTRUCTIONS
INSTALL THE MANUFACTURER OVERLAY LABEL BY FOLLOWING THE PROCEDURE BELOW:
1. Locate the manufacturer label on the vehicle driver side B-pillar (Figure 1).
2. Obtain the NEW manufacturer overlay label for the vehicle.
NOTE: Only one overlay label will be supplied depending on your vehicle type. Please verify
the overlay label is appropriate for the vehicle based on engine and tire size the vehicle is
equipped with.
• If you believe you received an incorrect overlay label, please contact your dealer.
Overlay
1
If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 225/55R18 tires
Use overlay with GVWR of 2420 kg/5335 lb and 225/55R18 tires
Overlay
2
If vehicle is equipped with a 2.0L Engine and 225/55R18 tires
Use overlay with GVWR of 2250 kg/4960 lb and 225/55R18 tires
Overlay
3
If vehicle is equipped with a 2.0L Engine and 235/40R20 tires
Use overlay with GVWR of 2250 kg/4960 lb and 235/40R20 tires
Overlay
4
If vehicle is equipped with a 2.0L Engine and 215/60R17 tires
Use overlay with GVWR of 2250 kg/4960 lb and 215/60R17 tires
Overlay
5
If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 235/40R20 tires
Use overlay with GVWR of 2420 kg/5335 lb and 235/40R20 tires
Overlay
6
If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 235/45R19 tires
Use overlay with GVWR of 2420 kg/5335 lb and 235/45R19 tires
Figure 1 – Locate Manufacturer Label Location
3. Use isopropyl alcohol or window cleaner and a clean cloth to remove any wax, oil, dust, and debris
from the existing manufacturer label.
4. Allow the isopropyl alcohol or window cleaner to fully evaporate before applying the overlay label.
5. Apply appropriate overlay label to the manufacturer label in the original position and with the same
text orientation to correct the information (Figure 2).
6. Apply pressure to the entire surface of the manufacturer overlay label with firm overlapping strokes
removing all wrinkles and air bubbles. Using a tool such as a squeegee is allowed.
Figure 2 – Install Manufacturer Overlay Label
Overlay 1, 2, 3, 4, 5, 6
Overlay
1
Overlay
2
Overlay
3
Overlay
4
Overlay
5
Overlay
6
**************************************************************************************************************
This notice applies to your vehicle,
32B/NHTSA 24V-209
YOUR SCHEDULING OPTIONS
1. RECOMMENDED OPTION
Call your authorized Chrysler /
Dodge / Jeep® / RAM Dealership.
2. Call the FCA Recall Assistance
Center at 1-800-853-1403. An
agent can confirm part availability
and help schedule an appointment.
3. Visit recalls.mopar.com, scan the
QR code below, or download the
Mopar Owner’s Companion App.
Get access to recall notifications, locate
your nearest dealer, and more through
this website or Mopar Owner’s
Companion App. You will be asked to
provide your Vehicle Identification
Number (VIN) to protect and verify
your identity. The last eight characters
of your VIN are provided above.
DEALERSHIP INSTRUCTIONS
Please reference Safety Recall 32B.
IMPORTANT SAFETY RECALL
Manufacturer label
Dear [Name],
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
FCA US LLC has decided that certain [2024 model year (GG) Dodge Hornet] vehicles fail to
conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 110 – Tire selection and rims.
It is extremely important to take steps now to repair your vehicle to ensure the safety of you and
your passengers.
WHY DOES MY VEHICLE NEED REPAIRS?
Your vehicle [1] may have been built with a manufacturer label that is missing rim and tire size
designation information. Relying on incorrect rim and tire size designation information can
result in the use of an incorrect wheel, which can increase the risk of a crash.
Federal Motor Vehicle Safety Standard (FMVSS) 571.110 S4.3.3 “Additional Labeling
Information for Vehicles Other Than Passenger Cars” requires “Each vehicle shall show the size
designation and, if applicable, the type designation of rims (not necessarily those on the vehicle)
appropriate for the tire appropriate for use on that vehicle, including the tire installed as original
equipment on the vehicle by the vehicle manufacturer” to be printed on the manufacturer label.
Subject vehicles are equipped with a manufacturer label that is missing the size designation of
the rims.
HOW DO I RESOLVE THIS IMPORTANT SAFETY ISSUE?
You may choose to apply the enclosed overlay label using the instruction as described on the
enclosed instructions letter. Or if you prefer not to install the label yourself, simply contact your
dealer to schedule a service appointment. FCA US LLC will repair your vehicle [2] free of charge
(parts and labor). To do this, your dealer will apply the manufacturer label overlay with
corrected information. The estimated repair time is 20 minutes. In addition, your dealer
will require your vehicle for proper check-in, preparation, and check-out during your visit,
which require more time. Your time is important to us, so we recommend that you schedule a
service appointment to minimize your inconvenience. Please bring the enclosed overlay label
and this letter with you to your dealership.
TO SCHEDULE YOUR FREE REPAIR,
CALL YOUR CHRYSLER, DODGE, JEEP OR RAM DEALER TODAY
WHAT IF I ALREADY PAID TO HAVE THIS REPAIR COMPLETED?
If you have already experienced this specific condition and have paid to have it repaired, you
may visit www.fcarecallreimbursement.com to submit your reimbursement request online. [3]
Once we receive and verify the required documents, reimbursement will be sent to you within
60 days. If you have had previous repairs performed and/or already received reimbursement,
you may still need to have the recall repair performed.
We apologize for any inconvenience, but are sincerely concerned about your safety. Thank you
for your attention to this important matter.
Customer Assistance/Field Operations
FCA US LLC
[Model Year and Model]
VIN XXXXXXXXXXXXXXXXX
LOGO
VEHICLE PICTURE
QR Code
[1] If you no longer own this vehicle, please help us update our records. Call the FCA Recall Assistance Center at 1-800-853-1403 to update your information.
[2] If your dealer fails or is unable to remedy this defect without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway
Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC 20590, or you can call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-
9153), or go to safercar.gov.
[3] You can also mail in your original receipts and proof of payment to the following address for reimbursement consideration: FCA Customer Assistance, P.O. Box 21-8004,
Auburn Hills, MI 48321-8007, Attention: Recall Reimbursement.
Note to lessors receiving this recall notice: Federal regulation requires that you forward this recall notice to the lessee within 10 days.
Mr. Mrs. Customer
1234 Main Street
Hometown, MI 48371
This notice applies to your vehicle,
32B/NHTSA 24V-209
YOUR SCHEDULING OPTIONS
1. RECOMMENDED OPTION
Call your authorized Alfa Romeo
dealership.
2. Call Alfa Romeo Premium Care at
1-866-932-3881. An agent can
confirm part availability and help
schedule an appointment.
3. Visit recalls.mopar.com, scan the
QR code below, or download the
Mopar Owner’s Companion App.
Get access to recall notifications, locate
your Alfa Romeo dealership, and more
through this website or Mopar Owner’s
Companion App. You will be asked to
provide your Vehicle Identification
Number (VIN) to protect and verify
your identity. The last eight characters
of your VIN are provided above.
DEALERSHIP INSTRUCTIONS
Please reference Safety Recall 32B.
IMPORTANT SAFETY RECALL
Manufacturer label
Dear [Name],
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
FCA US LLC has decided that certain [2024 model year (GC) Alfa Romeo Tonale] vehicles fail
to conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 110 – Tire selection and
rims.
It is extremely important to take steps now to repair your vehicle to ensure the safety of you and
your passengers.
WHY DOES MY VEHICLE NEED REPAIRS?
Your vehicle [1] may have been built with a manufacturer label that is missing rim and tire size
designation information. Relying on incorrect rim and tire size designation information can
result in the use of an incorrect wheel, which can increase the risk of a crash.
Federal Motor Vehicle Safety Standard (FMVSS) 571.110 S4.3.3 “Additional Labeling
Information for Vehicles Other Than Passenger Cars” requires “Each vehicle shall show the size
designation and, if applicable, the type designation of rims (not necessarily those on the vehicle)
appropriate for the tire appropriate for use on that vehicle, including the tire installed as original
equipment on the vehicle by the vehicle manufacturer” to be printed on the manufacturer label.
Subject vehicles are equipped with a manufacturer label that is missing the size designation of
the rims.
HOW DO I RESOLVE THIS IMPORTANT SAFETY ISSUE?
You may choose to apply the enclosed overlay label using the instruction as described on the
enclosed instructions letter. Or if you prefer not to install the label yourself, simply contact your
dealer to schedule a service appointment. FCA US LLC will repair your vehicle [2] free of charge
(parts and labor). To do this, your dealer will apply the manufacturer label overlay with
corrected information. The estimated repair time is 20 minutes. In addition, your dealer
will require your vehicle for proper check-in, preparation, and check-out during your visit,
which require more time. Your time is important to us, so we recommend that you schedule a
service appointment to minimize your inconvenience. Please bring the enclosed overlay label
and this letter with you to your dealership.
TO SCHEDULE YOUR FREE REPAIR,
CALL YOUR ALFA ROMEO DEALER TODAY
WHAT IF I ALREADY PAID TO HAVE THIS REPAIR COMPLETED?
If you have already experienced this specific condition and have paid to have it repaired, you
may visit www.fcarecallreimbursement.com to submit your reimbursement request online. [3]
Once we receive and verify the required documents, reimbursement will be sent to you within
60 days. If you have had previous repairs performed and/or already received reimbursement,
you may still need to have the recall repair performed.
We apologize for any inconvenience, but are sincerely concerned about your safety. Thank you
for your attention to this important matter.
Customer Assistance/Field Operations
[Model Year and Model]
VIN XXXXXXXXXXXXXXXXX
LOGO
VEHICLE PICTURE
QR Code
FCA US LLC
Mr. Mrs. Customer
1234 Main Street
Hometown, MI 48371
SAFETY RECALL 32B – MANUFACTURER LABEL
OWNER INSTRUCTIONS
INSTALL THE MANUFACTURER OVERLAY LABEL BY FOLLOWING THE PROCEDURE BELOW:
1. Locate the manufacturer label on the vehicle driver side B-pillar (Figure 1).
2. Obtain the NEW manufacturer overlay label for the vehicle.
NOTE: Only one overlay label will be supplied depending on your vehicle type. Please verify
the overlay label is appropriate for the vehicle based on engine and tire size the vehicle is
equipped with.
• If you believe you received an incorrect overlay label, please contact your dealer.
Overlay
1
If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 225/55R18 tires
Use overlay with GVWR of 2420 kg/5335 lb and 225/55R18 tires
Overlay
2
If vehicle is equipped with a 2.0L Engine and 225/55R18 tires
Use overlay with GVWR of 2250 kg/4960 lb and 225/55R18 tires
Overlay
3
If vehicle is equipped with a 2.0L Engine and 235/40R20 tires
Use overlay with GVWR of 2250 kg/4960 lb and 235/40R20 tires
Overlay
4
If vehicle is equipped with a 2.0L Engine and 215/60R17 tires
Use overlay with GVWR of 2250 kg/4960 lb and 215/60R17 tires
Overlay
5
If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 235/40R20 tires
Use overlay with GVWR of 2420 kg/5335 lb and 235/40R20 tires
Overlay
6
If Plug-in Hybrid Electric Vehicle with 1.3L Engine and 235/45R19 tires
Use overlay with GVWR of 2420 kg/5335 lb and 235/45R19 tires
Figure 1 – Locate Manufacturer Label Location
3. Use isopropyl alcohol or window cleaner and a clean cloth to remove any wax, oil, dust, and debris
from the existing manufacturer label.
4. Allow the isopropyl alcohol or window cleaner to fully evaporate before applying the overlay label.
5. Apply appropriate overlay label to the manufacturer label in the original position and with the same
text orientation to correct the information (Figure 2).
6. Apply pressure to the entire surface of the manufacturer overlay label with firm overlapping strokes
removing all wrinkles and air bubbles. Using a tool such as a squeegee is allowed.
Figure 2 – Install Manufacturer Overlay Label
Overlay 1, 2, 3, 4, 5, 6
Overlay
1
Overlay
2
Overlay
3
Overlay
4
Overlay
5
Overlay
6
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-07-07 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.