NUMBER: 08-039-15
GROUP: Electrical
DATE: April 18, 2015
THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE TRANSMITTAL (RRT) 15-037, ALL APPLICABLE SOLD AND UN-SOLD RRT VIN’s HAVE BEEN LOADED. TO VERIFY THAT THIS RRT SERVICE ACTION IS APPLICABLE TO THE VEHICLE, USE VIP OR PERFORM A VIN SEARCH IN TECHCONNECT. ALL REPAIRS ARE REIMBURSABLE WITHIN THE PROVISIONS OF WARRANTY.
THE wiTECH SOFTWARE LEVEL MUST BE AT 15.04 OR HIGHER TO PERFORM THIS PROCEDURE.
SUBJECT:
Tire Pressure Monitoring System May Display Wrong Tire Location
OVERVIEW:
The Body Control Module (BCM) must be reconfigured to a Premium Tire Pressure Monitor System (TPMS).
MODELS:
| 2013 – 2014 | (PF) | Dodge Dart Aero |
NOTE: This bulletin applies to vehicles built on or after November 08, 2012 (MDH 1108XX) and on or before August 06, 2014 (MDH 0806XX) equipped with Premium Instrument Cluster (Sales Code JAJ) with Base Tire Pressure Monitoring System (Sales Codes LAB).
SYMPTOM/CONDITION:
The customer may notice a message “Low Tire” displayed on the cluster:
- Tire Pressure Monitoring screen on the instrument cluster may indicate the incorrect tire location shown when low tire pressure is detected.
- Example scenario: Right rear tire (RR) may show as low on the instrument cluster when actually it may be left front tire (LF) as being low when a tire gauge is used to check tire pressure.
Fig. 1 Low Tire Display On Instrument Cluster
DIAGNOSIS:
Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all systems are functioning as designed. If DTCs or symptom conditions, other than the ones listed above are present, record the issues on the repair order and repair as necessary before proceeding further with this bulletin.
If a customer’s VIN is listed in VIP or your RRT VIN list, perform the repair. For all other customers that describe the symptom/condition listed above, perform the Repair Procedure.
REPAIR PROCEDURE:
NOTE: Install a battery charger to ensure battery voltage does not drop below 13.2 volts. Do not allow the charging voltage to climb above 13.5 volts during the reconfig process.
- Using wiTECH, reconfigure the Body Control Module (BCM). This routine is available under the ‘Diagnostic Procedures’ tab found on the home, ‘Vehicle View’, page of wiTECH.
- From the “Vehicle View” screen, select the “Vehicle Preparations” tab.
- Highlight the “Restore BCM Proxi Configuration” row and select the green arrow.
- Follow the wiTECH screen prompts.
- Perform the “Proxi Configuration Alignment” procedure.
- Follow the wiTECH screen prompts.
- Return to the “Vehicle View” screen.
- Using wiTECH clear any DTCs which may have been set during the reconfiguration.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
| Labor Operation No: | Description | Skill Category | Amount |
| 18-19-02-AF | Module, Body Control (BCM) Reprogram (1 – Semi-Skilled) | 6- Electrical And Body Systems | 0.2 Hrs. |
NOTE: The expected completion time for the flash download portion of this procedure is approximately 4 minutes. Actual flash download times may be affected by vehicle connection and network capabilities.
FAILURE CODE:
The dealer must choose which failure code to use. If the customer came in with an issue and the dealer found updated software to correct that issue, use failure code CC, for all other use failure code RF.
- If the customer’s concern matches the SYMPTOM/CONDITION identified in the Service Bulletin, than failure code CC is to be used.
- If an available flash is completed while addressing a different customer concern, failure code RF is to be used.
| CC | Customer Concern |
| RF | Routine Flash |
https://static.nhtsa.gov/odi/tsbs/2015/SB-10057931-9361.pdf
Bestseller No. 1
VXDAS TPMS Relearn Tool Only for GM Vehicles (2006-2024 Chevy/Buick/GMC/Opel/Cadillac) Original Sensor with 315/433 MHz, Tire Sensors Pressure Monitor System Reset Tool OEC-T5-2025 Edition
- 🚗2023 UPDATED FOR WIDER COMPATIBILITY: Specifically designed to work with most GM vehicles 2006-2023 (Chevy / Buick / GMC / Opel /Cadillac and more) equipped with 315/433 MHz. Your vehicle deserves the best tire pressure sensor reset tool.(It is not suitable for heavy trucks with more than 4 tires or vehicles with an external TPMS system.)Tip:Based on factory and customer-tested models shown in A+, please refer to the car model list to confirm compatibility with the VXDAS TPMS tool.
- SAVE TIME, SAVE MONEY: Tire pressure monitor sensor activation tool is quick, simple, and efficient. With a press of a button, activate your TPM sensors within 1-2 minutes, saving you trips to the dealer or a tire store.
- 🚗ESSENTIAL, EASY TO USE TOOL: This tire pressure reset tool is essential for replacing tire pressure sensors, removing tire pressure alarms or changing tires. Simply ensure your vehicle is in TPMS Learn Mode, hold the tool against the tire sidewall near the valve stem, and depress the Learn button! Sensors should be original OEM sensors which well programmed.and make sure your tire sensor is full charged or is under good conditions before use our TPMS tool.
- SUPERIOR QUALITY, SUPERIOR PERFORMANCE: Featuring a sensitive sensor chip for faster operation and an immersion gold process circuit board for stability. Our GM TPMS relearn tool is built for precision, accuracy, and durability.
- MAXIMIZE SAFETY WITH TPMS RELEARN TOOL: Ensure optimal tire pressure with our TPMS Reset tool. Enhance safety and gain control on every journey, taking away the worries of tire underinflation!
SaleBestseller No. 2
Autel MaxiTPMS TS508WF TPMS Relearn Tool, Activate/Diagnosis All Sensors
- 💯【Purchas.e from "Autel Store" 】Please don't purchas.e from "JBTools" Store. Please purchas.e from "Autel Store", this is Autel Offici.al Store and can get professional te.ch Support. 🚩If you met any issues about: Received a registered device/ Language Changing/ Function not Support, please conta.ct us via 📞Autelchoice@ outlook. com🛣️ assp, we will provide perfect solution for you. 🚦Note: ➊All Autel TPMS scan tool can ONLY program Autel MX-sensors, can NOT program other brand sensors! ➋Function are vehicle-specific---Send the vehicle VIN>make>year>model>wanted functions to 📞Autelchoice@ outlook. com🛣️ to verify compatibility.
- 👍【2026 Autel TS508WF, WIFI Fre.e Update】Upgrade from Autel TS408S TS508 TS501 PRO TS408, 2026 latest Autel TPMS tool TS508WF has upgraded to WIFI fre.e update. It packed advanced TPMS functions: TPMS programming(MX-Sensors), sensors Relearn/ Activation, TPMS Reset and health diagnose, Read Sensor Data, Quick/ Advanced Mode for faster&smarter TPMS repairs, Tire Type/ Pressure Selection etc. 🚦Functions vary by vehicle make, model, year, please send us car VIN to 📞Autelchoice@ outlook. com📞 check compatibility before order!
- 👏【Program Autel MX-Sensor in 4 Ways】Autel TS508WF TPMS Programming Tool enables all car enthusiasts to program sensor data to Autel MX-Sensors(315/433MHz) with ease, saving you the money and trip to a dealership. TS508WF with 4 professional programming options: Copy By OBD,Copy by Activate, Copy by Input, Auto Create 1-16 Sensors to replace the faulty sensor with low battery life or one that is not functioning well. 📢👉Note: Autel TPMS Programming Tool TS508WF ONLY programs Autel MX-sensors. It can NOT program other brand sensors. If you need program other brand sensor, please don’t order.
- 👍【Activate & Relearn 99% TPMS Sensors】Compared with MaxiTPMS TS401, TS408. Autel TS508WF TPMS Relearn Tool has added a New OBD Relearn Method. Autel TS508WF TPMS reset tool can wirelessly activate & relearn all OE or aftermarket TPMS sensors. Autel TS508 WF can retrieve TPMS sensor data like Sensor ID, Tire Pressure, Tire Temperature, Sensor Battery, Sensor Position, etc, and provides you with 3 ways of on-tool relearn procedures: 1. Stationary Relearn, 2. Automatic Relearn, 3. Relearn by OBD (TS408 not support). Note: Functions does not support all vehicles, please sned VIN to 📞Autelchoice@ outlook. com check compatibility.
- 👍【WIFI Fre.e Update, Wide Vehicle Coverage】Unlike ancient TS508 TS408 TS501 which only support software update by P-C, Autel TS508WF TPMS Programming tool has fully upgraded to WIFI fre.e update, you can update with WIFI at any time, also with lifetime fr.ee update. Note: Autel TS508WF TPMS Tool works on extensive cars: US cars after 1996, EU cars after 2006, Asian cars after 2009 to date.
SaleBestseller No. 3
XTOOL TP150 TPMS Programming Tool, 2026 Universal TPMS Relearn Tool
- 【Quick TPMS Maintenance】The XTOOL TP150 tpms programming tool efficiently supports TPMS maintenance by activating, relearning, and programming sensors, reading data, diagnosing issues, and resetting warning lights. TPMS management is quick and simple for both professionals and DIY enthusiasts. Important Notes: 1. XTOOL TPMS TP150 can only program 𝐏𝐫𝐞-𝐩𝐫𝐨𝐠𝐫𝐚𝐦𝐦𝐞𝐝 𝐒𝐞𝐧𝐬𝐨𝐫𝐬 or 𝐗𝐓𝐎𝐎𝐋 𝐓𝐒𝟏𝟎𝟎 𝐒𝐞𝐧𝐬𝐨𝐫𝐬. 2. If a TPMS sensor cannot be read or relearned, ensure it is 𝐀𝐜𝐭𝐢𝐯𝐚𝐭𝐞𝐝 𝐛𝐲 𝐓𝐏𝟏𝟓𝟎 before performing reading or relearning operations. 3. Check compatibility firstly before purchase. Any TPMS Tool problems pls reach via xtoolofficial@ hotm ail .c 0 m.
- Why XTOOL TP150 TPMS Relearn Tool Stands Out: Perfect for DIYers and professional technicians, the XTOOL TP150 TPMS Reset Tool combines TPMS diagnostics, sensor activation, relearn, reset and sensor programming with XTOOL TS100 Sensors in one portable tool, making common TPMS service easier in one device. Its durable physical button interface is easy to operate with greasy gloves, making it ideal for garages, workshops, or roadside use. Check tire pressure, reset TPMS warning lights, and simplify sensor service with simple, easy-to-use controls. Supports the newest car models with frequent lifetime software updates and 13+ languages. 𝐍𝐎𝐓𝐄: TPMS Programming for XTOOL Sensors Only.
- The XTOOL TP150 Tire Pressure Monitoring System Diagnostic Tool is your comprehensive solution for TPMS service. With the professional XTOOL TP150 tire sensor reset tool, you can easily monitor and repair the TPMS system, check tire pressure, temperature, battery life, and sensor functionality. The XTOOL TP150 TPMS activation tool also lets you read sensor IDs, clear Diagnostic Trouble Codes (DTCs), and check for any issues in your vehicle. You can reset the TPMS warning light, activate or program sensors, and relearn sensors after replacing tire sensors. 𝐓𝐢𝐩: Please provide your VIN for compatibility checking before purchasing.
- TP150 TPMS sensor programmer incorporates all features of universal tpms relearn tool, with sensor programming, TPMS relearn/reset, activation and diagnostics. For Dual Frequency TPMS Sensors (315&433Mhz) that covers the 99% vehicle makes and models of U.S. domestic, Asian and European. TP150 tpms tool comes with 4 Programming Modes: Automatically ID Generation, Entry ID Manually, Copy ID via Activation, Copy ID via OBD, effectively improve installation efficiency and save time with lifetime updates. 𝐍𝐎𝐓𝐄: 𝐏𝐫𝐨𝐠𝐫𝐚𝐦 𝐎𝐍𝐋𝐘 for 𝐗𝐓𝐎𝐎𝐋 𝐓𝐒𝟏𝟎𝟎 𝐨𝐫 𝐏𝐫𝐞-𝐩𝐫𝐨𝐠𝐫𝐚𝐦𝐦𝐞𝐝 𝐒𝐞𝐧𝐬𝐨𝐫𝐬. (Package NOT Included XTOOL TS100)
- Quickly Activate & Trigger Compatible TPMS Sensors: XTOOL TP150 tire pressure sensor reset tool activates compatible pre-programmed OEM/universal sensors and provides real-time sensor data, including sensor ID, tire pressure, temperature, battery status, and frequency. After selecting the correct make, model, and year, the tool provides step-by-step activation instructions. Please check compatibility before purchase. For prompt support with activation issues, simply provide your device S/N for assistance.
Bestseller No. 4
SpassLeben TPMS Relearn Tool for GM, Auto Tire Pressure Monitor Sensor Activation Reset Tool, Tire Sensor Reset Tool, for GM Series Vehicle Chevy Cadillac GMC Buick 2006-2026 (Orange-A)
- TPMS RELEARN TOOL FOR GM: This tire pressure monitor system relearn tool is compatible with most General Motors equipped with 315 MHz or 433 MHz sensor, including Chevy, Buick, GMC, Opel, Cadillac, etc, from 2006-2024, Cars, SUV, Pickup, Not for Heavy Truck
- SAVE YOUR TIME AND MONEY: TPMS reset activation tool can help you reprogram all tires within 1-2 minutes. It is easy and fast to operate, simply press a button to reset the tire pressure monitoring sensor. Saving you money over paying dealer or tire shop
- EASY TO USE TIRE RESET TOOL: First, please set your car to tire learning mode, then hold the tool antenna against the sidewall of the tire near the valve stem(sensor), and press the button until the car beeps. If no beeps, please try multiple positions nearby
- ESSENTIAL TOOL FOR DRIVING: TPMS relearn tool is an essential tool of replacing tire sensor, clearing tire pressure alarm or changing tires. Please follow this order to reset: Front driver, Front passenger, Rear passenger and Rear driver, and the car will beep twice finally
- GOOD BATTERY CONDITION: Please use a 9v 6LR61 battery, not 6F22, as it may display low battery, please don't worry, this tool can still work in low battery state. A good condition will work more effectively. Battery not included
SaleBestseller No. 5
GEARWRENCH Universal TPMS Programming & Diagnostic Tool | GWTPMS
- Clear TPMS warning lights on nearly any vehicle in seconds
- Works with both 315 MHz & 433 MHz sensors for maximum coverage
- Seamlessly programs all GEARWRENCH branded TPMS sensors
- Save time by programming up to 8 sensors simultaneously
- Read and clear TPMS codes, check sensor ID, position, pressure, temperature, and battery status
This product presentation was made with AAWP plugin.