NUMBER: 09-010-15
GROUP: Engine
DATE: August 22, 2015
SUBJECT:
Incorrect 5.7L Engine Oil Dipstick
OVERVIEW:
This bulletin involves installing the correct engine oil indicator (Dipstick).
MODELS:
NOTE: This bulletin applies to vehicles within the following markets/countries: NAFTA, EMEA, APAC OR LATAM.
NOTE: This bulletin applies to vehicles built on or before June 02, 2015 (MDH 0602XX) equipped with 5.7L Engine (Sales Codes EZH).
SYMPTOM/CONDITION:
The customer may notice blue smoke coming from the tail pipe after the vehicle was started. Also after performing an oil change the Dipstick may indicate the oil was low. When changing the oil and filter, service information shows 7 quarts / 6.6 liters are required. After installing 7 quarts / 6.6 liters the Dipstick may indicate the engine oil level is 1 quart / .95 liters low.
DIAGNOSIS:
If a customer describe the symptom/condition listed above, perform the Repair Procedure.
PARTS REQUIRED:
| Qty. | Part No. | Description |
| 1 | 53034186AD
Sale
INDICATOR-ENGINE OIL LEVEL
| Indicator, Engine Oil Level (Dipstick) |
REPAIR PROCEDURE:
- Remove the Dipstick from the tube and look for the part number.
Fig. 1 Location Of The Part Number On The Dipstick
- Is part number 53034186AD on the Dipstick?
- Yes >>> This bulletin does not apply. Perform normal diagnostics.
- No >>> Replace the Dipstick with part number 53034186AD.
- Verify and adjust oil level.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
| Labor Operation No: | Description | Skill Category | Amount |
| 09-60-40-94 | Indicator Engine Oil – Inspect and/or Replace (0 – Introduction) | 8 – Engine Performance | 0.2 Hrs. |
FAILURE CODE:
| ZZ | Service Action |
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes*
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets engine test requirements of Chrysler
MS 6395 | Meets Ford WSS-M2C946-B1 | Meets Ford WSS-M2C961-A3 - Or one year, whichever comes first
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Delivers 40% stronger wear protection than industry standards to reduce friction and improve fuel economy
- Provides 15% better deposit defense vs. industry standards, keeping engines cleaner for smoother performance and longer-lasting protection
- Up to 2.5X better heat protection vs. industry standards to fight harmful sludge formation and thermal breakdown
- Engineered for excellent low-temperature flow, reducing metal-to-metal contact during cold starts — when most engine wear typically occurs
- Mobil 1 High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Formulated for engines with 75,000 miles or more, Valvoline MaxLife High Mileage synthetic blend is formulated with seal conditioners to help prevent oil leaks and reduce oil consumption
- Delivers 20% better wear protection and 15% better sludge defense than industry standards to help prevent engine breakdown
- Extra detergents safeguard against friction, corrosion and deposits to keep high-mileage engines clean
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency
- Provides performance benefits for high mileage, new and re-built engines alike
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards* | Seal conditioners to help reduce leaks
- Advanced additives that help prevent engine wear | Improved Fuel Economy**
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets Ford WSS-M2C946-B1 | Meets Ford WSS-M2C961-A1 | * Based on API and ACEA volatility specifications | ** In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
This product presentation was made with AAWP plugin.