Air Conditioning Inoperative – 2016 Fiat 500X & 2015 Jeep Renegade

NUMBER: 24-002-16
GROUP: Heating & Air Conditioning
DATE: January 09, 2016

 

THIS BULLETIN SUPERSEDES SERVICE BULLETIN 24-007-15, DATED NOVEMBER 07, 2015, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE AN UPDATED PART NUMBER.

HELP USING THE wiTECH DIAGNOSTIC APPLICATION FOR FLASHING AN ECU IS AVAILABLE BY SELECTING “HELP” THEN “HELP CONTENTS” AT THE TOP OF THE wiTECH DIAGNOSTIC APPLICATION WINDOW.

THE wiTECH SOFTWARE IS REQUIRED TO BE AT THE LATEST RELEASE BEFORE PERFORMING THIS PROCEDURE.

 

SUBJECT:

Air Conditioning Inoperative

 

OVERVIEW:

This bulletin involves replacing the Manual Climate Control Module.

 

MODELS:

2016(FB)FiateBay logo 500X
2015(BU)JeepeBay logo Renegade

 

NOTE: This bulletin applies to vehicles within the following markets/countries: NAFTA, EMEA.

NOTE: This bulletin applies to vehicles built on or before June 17, 2015 (MDH 0617XX).

 

SYMPTOM/CONDITION:

A small number of customers may experience the loss of air conditioning operation (A/C compressor will not turn on).

 

DIAGNOSIS:

Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all systems are functioning as designed. If DTCs or symptom conditions, are present other than the symptom condition listed above, record the issues on the repair order and repair as necessary before proceeding further with this bulletin.

If the customer describes the symptom/condition listed above, perform the Repair Procedure.

 

PARTS REQUIRED:

Qty. Part No. Description
16CW62LXHAAClimate Control Module (FB)
16CY58LXHAA

No products found.

Climate Control Module (BU)

 

REPAIR PROCEDURE:

  1. Replace the Manual Climate Control Module.Refer to the detailed service procedures available in DealerCONNECT> TechCONNECT under: Service Info> 24 – Heating and air Conditioning > Controls > CONTROL, A/C and Heater > Removal and Installation.
  2. Clear all DTCs that may have been set in any module due to reprogramming. The wiTECH application will automatically present all DTCs after the flash and allow them to be cleared.

 

POLICY:

Reimbursable within the provisions of the warranty.

 

TIME ALLOWANCE:

Labor Operation No: DescriptionSkill Category Amount
24-50-10-9BModule, Heating Ventilation Air Conditioning (HVAC) – Replace (2 – Skill Level)07 – A/C and Heating0.4 Hrs.

 

FAILURE CODE:

ZZService Action

 


https://www.nhtsa.gov/recalls?nhtsaId=10119638

 

 


 

 


 

No products found.

This product presentation was made with AAWP plugin.

Leave a Comment

1
Share to...