“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V344
Manufacturer Chrysler (FCA US LLC)
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 14
Cylinder damage or camshaft failure can cause the engine to stall, increasing the risk of a crash.
Summary
Chrysler (FCA US LLC) is recalling certain 2019 Jeep
Cherokee vehicles equipped with 2.0L engines. The engines in these vehicles may be missing valve stem keepers, which can allow the valve to drop into the engine cylinder causing engine damage. These engines may also have a reversed camshaft cap that can damage the camshaft bearing causing camshaft failure.
Remedy
Chrysler will notify owners, and dealers will inspect and repair or replace the affected engine components, as necessary, free of charge. The recall is expected to begin July 14, 2018. Owners may contact Chrysler
customer service at 1-800-853-1403. Chrysler
’s number for this recall is U52.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
Safety Recall Advanced Communication – U52
06/01/2018
Recall Acknowledgement
June 11, 2018
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN PLUS/SN | ILSAC GF-6 | Meets Ford WSS-M2C945-B1 | Meets Ford WSS-M2C960-A1 |
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Full synthetic formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- Or one year, whichever comes first
- The first motor oil to actively restore engine cleanliness and protect against future damage
- With continuous use, Valvoline Active Clean Technology removes up to 100% of deposits while Liqui-Shield Technology helps prevent future deposits (*with regular oil changes. In Adapted Sequence IIIH Testing: Piston Deposit Removal)
- 79% stronger anti-wear protection than industry standards (vs. GF-6 qualified oil)
- Minimizes friction between metal surfaces in your engine to help improve fuel economy
- The best motor oil for any age vehicle, from your new car’s first oil change to high-mileage vehicles
- 3X Stronger than the leading full synthetic*
- Highest level of wear protection
- 50X Better High Temperature performance**
- 25,000 miles between oil changes***
- Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic 0W-20 formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- Mobil 1 advanced full synthetic motor oil 5W-20 helps to protect your engine from the five factors that can damage engines over time
- Helps to protect critical engine parts for up to 10,000 miles between oil changes*, controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes*
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM ILSAC GF-6 | Meets engine test requirements of Chrysler
MS 6395 | Meets Ford WSS-M2C945-B1 | Meets Ford WSS-M2C960-A1
- Or one year, whichever comes first
- Our most advanced full synthetic 5W-20 engine oil, designed for unbeatable engine protection*
- Pennzoil Ultra Platinum comes with a 20-year, 750,000 mile warranty** to protect your engine and give you peace of mind to drive every mile as hard as you can
- Made with natural gas
- Outstanding performance in extreme temperatures
- Designed for high-performance engines, it helps protect engines from loss of power
Last update on 2025-07-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.