GROUP: Vehicle Performance
DATE: November 06, 2015
THIS BULLETIN SUPERSEDES SERVICE BULLETIN 18-065-14, DATED NOVEMBER 21, 2014, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE A REVISED SUBJECT INFORMATION, ADDITIONAL MODEL YEAR, UPDATED MARKET INFORMATION, UPDATED BUILD DATE, ADDITIONAL ENGINE, REMOVAL OF THE MANUAL TRANSMISSION SALES CODE, UPDATED SYMPTOM/CONDITION LIST, AND NEW LOP.
HELP USING THE wiTECH DIAGNOSTIC APPLICATION FOR FLASHING AN ECU IS AVAILABLE BY SELECTING “HELP” THEN “HELP CONTENTS” AT THE TOP OF THE wiTECH DIAGNOSTIC APPLICATION WINDOW.
THE wiTECH SOFTWARE IS REQUIRED TO BE AT THE LATEST RELEASE BEFORE PERFORMING THIS PROCEDURE.
Flash: 1.6L and 2.0L Diagnostic And System Enhancements
|2015 - **2016**||(BU)||Jeep Renegade (International Only)|
NOTE: **This bulletin applies to vehicles within the following markets/countries: EMEA.**
NOTE: This bulletin applies to vehicles built **on or before October 02, 2015 (MDH 1002XX) equipped with the 1.6.L l4 ECO Turbo Diesel Engine (Sales Code EJK)** and 2.0L l4 Turbo Diesel Engine (Sales Code EBT).
A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the ECM memory.
- **P112C-00 Lambda Sensor Downstream Signal Plausibility Check.**
- P1451-00 Diesel Particulate Filter Efficiency Result.
Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are functioning as designed. If DTCs other than those listed above are present, record them on the repair order and repair as necessary before proceeding further with this bulletin.
If the customer describes a symptom/condition listed above or if the technician finds a DTC, perform the Repair Procedure.
NOTE: If this flash process is interrupted/aborted, the flash should be restarted.
- Reprogram the Engine Control Module (ECM) with the latest software.
- Turn off the ignition, disconnect the wiTECH, open and close the driver’s door and let all modules go to sleep.
- Reconnect the wiTECH and clear any DTCs that may have been set in other modules due to reprogramming.
Reimbursable within the provisions of the warranty.
|Labor Operation No:||Description||Skill Category||Amount|
|**18-19-04-DL**||Update Module - Reprogram Engine Control Module (ECM) (1- Semi-Skilled)||10- Diesel||0.2 Hrs.|
NOTE: The expected completion time for the flash download portion of this procedure is approximately 5 minutes. Actual flash download times may be affected by vehicle connection and network capabilities.
The dealer must choose which failure code to use. If the customer came in with an issue and if the dealer finds a software update to correct that issue, use failure code CC, for all other use failure code RF.
- If the customer’s concern matches the SYMPTOM/CONDITION identified in the Service Bulletin, failure code CC is to be used.
- If an available flash is completed while addressing a different customer concern, failure code RF is to be used.
Chrysler Recommended J2534 Devices
|J2534 Device||Firmware Version|
|CTC Vehicle Box *||1.9|
|Blue Streak -2534 Global Programmer||2.10|
|Actia I+ME Passthru||2.07|
* Chrysler recommends the CTC Vehicle Box Device for Chrysler SCI ECU reprogramming. SCI reprogramming is used on most PCMs and TCMs prior to the introduction of CAN bus vehicles which began in 2004 (Durango).
Compatible J2534 Devices
- 👍【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘 !
- 👍Fully compatible with both SAE J2534-1 and J2534-2 reprogramming standards and performs standard Pass Thru J2534 functionality. To check compatibility, please contact🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- 👍Compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- 👍Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable.
- 👍Attention: 1. After you ordered and received the J2534, please send us both of the S/N(12 digits, at the back of the device) of the J2534 and your MK908(P) /MS908S (Pro)/ Maxisys Elite to us to bind the two device together. 2. The functions are NOT universally compatible. Please send VIN number to 🚘auteldirect @ outlook . com🚘 to check compatibility before your order.
- 👍【SAME AS MK908P & BETTER TECH SUPPORT】 MS908S Pro has EXACTLY the same diagnostics and service functions as MK908P and Autel MaxiSys Elite. Unlike online product MK908P, MS908S Pro is a mature product that has been tested and approved by workshops across US! NOTE: MS908S Pro is for North & South America only, and support English only.
- 👍【J-2534 ECU PROGRAMMING】Autel MaxiSys MS908S Pro is a professional automotive diagnostic scanner that utilizes powerful Cortex A7+A15 six-core processor that can perform OE level all systems diagnostics and various special functions. With J2534 ECU Programming Device included, it is capable of replacing the existing software & firmware and programming new ECUs(PCM, ECM) for specific BMW and Benz.
- 👍【25 SPECIAL FUNCTIONS FOR PROS】 Autel MS908S Pro is an advanced auto scan tools that can perform various special functions: Oil Reset, EPB reset, DPF Regen, ABS Bleed, SAS, Battery Registration, Injector Coding, Power Balance, Crankshaft Variation Learn and etc. NOTE: Special Functions are NOT universally compatible. Pls send VIN to 🚘auteldirect @ outlook . com🚘 to check compatibility before purchase.
- 👍【EXTENSIVE VEHICLE COVERAGE】 MS908S Pro diagnostic scanner computer covers more than 80 US, Asian and European vehicle makes. The scan tool can work on most OBDII-compliant vehicles to locate check engine issues, 80+ makes and models to scan all available systems. For special functions, coverage varies across vehicles, please send VIN number to 🚘auteldirect @ outlook . com🚘 to check compatibility first.
- 👍【HASSLE-FREE PURCHASE】 Autel MaxiSys MS908S Pro car scanner comes with 12 Months FREE software updates and services and is backed by Amazon 30 Day Return Policy. If there are any issues or concerns, please contact us directly via 🚘auteldirect @ outlook . com🚘 for prompt tech support and best after-sales services! Purchase now to solve drivability issues, emission issues and save both time & money.
- VXDIAG SVCI J2534 can compatible with SAE J2534-1 and partly compatible with SAE J2534-2. It supports most of vehicle communication protocols and can be used as PassThru device for many dealer level diagnostic software. And it can be used as a ELM327 device also, support most of ELM327 software.
- High speed host communication and Stable host communication. (with RTS/CTS flow control).Host communication is high-speed and stable, keeping the diagnosis smooth. And the programming function requires the original online account .（Not work for the Ford F serial cars, like F150,F250,F350,F450）
- [Switch on the Interface] There is a switch button on the interface. Please do press the switch button for the Module you want enter in. Pressed: works as ELM327 mode Released: works as J2534 mode
- VXDIAG SVCI J2534 is compatible with Ford / Mazda IDS,Only need to do two steps to Installs software. First,Install FVDI J2534 start software,then install the original brand vehicle software,For example, Ford, Mazda.(Before install the software,pls turn off your antivirus software )
- For software installation, please feel free to contact our online customer service.
- 🚩🚩【2 Year Free Update, Saving $1295】New version Autel MaxiSys Elite, possessing more advanced hardware & longer 2-year free update that is equal to saving $1295 for you, and sharing same functions with Autel MS908S Pro/MK908P/MaxiSys Elite II (Above Only provides 1-year update). User-oriented Autel diagnostic scanner Elite makes itself affordable and effective.
- 🚩🚩【Elite-Live Up to Its Name】 As the updated version of Autel MK908P/MS908CV, the MaxiSys Elite is more economical than Ultra which costs you 2000 bucks more. The flagship-product- MaxiSys Elite has equipped with a set of solid hardware such as ✅ Quad-core Processor- NVIDIA Tegra 4, ✅ 2GB RAM & 64GB ROM, ✅ 9.7” Retina display with ✅ 2048X1536 resolution,✅ Android 4.4.4 OS, ✅ 15400mAH battery, etc. We have prepared almost everything just to smooth a path for your vehicle diagnostic process.
- 🚩🚩【ECU Programming & Coding】To bring out your potential and maximize the profit, the MaxiSys Elite has featured two essential functions-ECU Coding & Programming which empowers you to 👍 program the blank ECUs, 👍 match the components, 👍 reflash the second-hand ECUs, 👍 flash the hidden functions. And also, you can pass thru the gateway to access online data, because the Elite is compatible with J2534 interface. 👉NOTE: ONLY SUPPORTED IN U.S. MARKET.
- 🚩🚩【36+ Special Functions & Full-System Diagnosis】The 36+ special functions can help you cope with variety of DTCs as easy as ABC. Here is a list of commonly used special functions, maybe you can find something you’ve been looking for👉: Oil Light Reset, Steering Angle Reset, Injector Coding, ABS Bleeding, TPMS Reset, EPB Reset, Suspension Reset, etc. As for the full-system diagnostic, the Elite allows you to root out the problems hidden in the onboard systems such as👉 PCM, ECM, EPS, PDM, BCM, TPM, SCCM, RADIO, etc.
- 🚩🚩【Online Functions & Active Test】The MaxiSys Elite also provides you with some high-end functions which helps you to pass-thru the gateway to access online vehicle repair data for instance the online coding for VW, Audi, Porsche, Benz, BMW and the online configuration for Renault and so on. To help you to build a bridge to mutual communicate with the onboard systems, the active test can send the orders to ECUs and control the onboard modules such as PDM, SMF, RSM, TCU, etc.
- VCX is designed on the basis of the latest automotive international standards so that it can support many professional automotive diagnostic applications
- WIFI Version VXDIAG VCX Nano compatible for TOYOTA and Lexus, support both USB connection and WIFI connection, support latest version software, Compatible with varieties protocols. can be very easy to connect various automotive bus to a PC
- OS support both WINDOWS XP and Windows 7, Software support multi-languages: Chinese, English, French, Italian, Spanish, German, ec
- You can download the vxmanager online, if you have any license problem please send us the serial number to extend the license
- One year warranty. Please contact us via order center if you have any problem with software installation
- 【XP400 Programmer 】XP400 is to read transponder data (especially Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, etc. IMMO application provides Smart Mode and Expert Mode to guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc. Please send VIN number to▲Autelonline @ outlook . com▲ to check compatibility before purchasing.
- 【KEY PROGRAMMING Function】The most advanced and smart key programming tool that combines the most powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one Android based 10.1-inch touchscreen tablet, it helps perform complete key programming quickly.
- 【IMMO & J2534 Reprogrammer】The Wireless Diagnostic Interface supports two communication methods with the tablet: BT and USB. The working range for BT communication is about 210 feet (70 m). You can perform key programming and vehicle diagnosis on various vehicles conveniently, by pairing the tablet separately to each of the MaxiFlash.【 Note: J2534 can't program ECU with the IM608】
- 【ECU CODING & ACTIVE TEST & 23 Services Function】Bi-directional control of the ECM is useful in determining whetherthe ECM responds to a command well. And Auto VIN Identification, ECU Coding are available for IM608. Most useful service including: Oil Reset Service/ EPB Service/ BMS Service/ SAS Service/ DPF Service etc.
- 【No IP Lock & 1 Year Free Update + Life-long time tech-support】More langauage are available such as French, German, Italian, Polish, Dutch, Swedish, Korean, Japanese, Russian. Please contact by providing SN if needing authorized. 𝙎𝙪𝙥𝙥𝙤𝙧𝙩 𝙫𝙚𝙝𝙞𝙘𝙡𝙚𝙨 𝙪𝙥 𝙩𝙤 𝟮𝟬𝟭𝟵, 𝟮𝟬𝟮𝟬 𝙖𝙣𝙙 𝙨𝙤𝙢𝙚 𝙪𝙥 𝙩𝙤 𝟮𝟬𝟮𝟭
- 【LAUNCH X431 PAD VII, 2022 Top Scanner】 As the latest all-around diagnostic scan tool, LAUNCH X431 PAD VII has upgraded on top of LAUNCH X431 V+/PROS V/X431 PADIII to rival the OEM automotive scanner. Owing ecu programming & online coding, J2534/RP1210/D-PDU/Do-IP/CANFD diagnostic protocols, topology map, 50+ service functions, 2022 advanced functions, highest hardware configuration, and 99.99% vehicles coverage, LAUNCH X431 PAD VII is a worthwhile investment for repair shops and mechanics.
- 【ECU Programming & Coding】 LAUNCH X431 PAD VII car diagnostic scanner with J2534 can perform ECU coding & programming to get the car to work correctly after module replacement. It supports multiple protocols: J2534 (diagnose vehicles with OEM software and VCI), RP1210/D-PDU (diagnose heavy trucks (the diagnostic software and a non-standard 16PIN connector sold separately), Do-IP (diagnose E and F Chassis BMWs and new cars from Land Rover/Jaguar), CAN FD (diagnose new vehicles from GM).
- 【Intelligent Diagnose & Guided Functions】 LAUNCH X431 PAD VII scan tool aims at freeing mechanics from tedious works. Intelligent Diagnose can easily get the VIN information of the car, guide you to vehicle information page without step-by-step selection, and display all diagnostic records. Guided Function (for V.A.G) enables you to follow the on-screen prompts, simple & convenient. Pin Detection allows you to detect the voltage of DLC pins and supported protocol types to troubleshoot the DLC.
- 【LAUNCH X431 PAD VII, 50+ Services & Topology Map】 LAUNCH X431 PAD VII bidirectional scan tool has 50+ maintenance functions, including but not limited to oil reset/ABS Bleeding/Injector Coding/AdBlue reset, helping you win more business. With topology map function, you can check the DTCs and all systems communication status visually in LAUNCH X431 PAD VII top obd2 scanner. The actuation test enables the tablet to output commands to the ECU to determine the integrity of systems or parts.
- 【All-in-One Tool for Diagnoses and Inspections, Save $2000+】 LAUNCH X431 PAD VII supports add-on modules (sold separately) to carry out more in-depth inspections and calibrations: oscillograph, sensor, battery test, endoscope, Wi-Fi printer, TSGUN, Immobilizer,etc. With 60+ advanced functions: guided functions, component matching, power balance, online parameterization, online calibration, LAUNCH X431 PAD VII high-end comprehensive diagnostic scan tool turns you into a pro auto mechanic.
- 👍【SAME AS ELITE - LOWER BUDGET】Autel MS908S Pro has the same functions as Autel MaxiSys Elite, but supports "Remote Expert" (since 05-15-2021) while Elilte doesn't, and more affordable with 1 year free updates. You can still use the installed softwares after expire. It's better by re-subscribing every 2~3 year. 👉We offer deal price for renew for Autel tools. If need any support, pls contact via🚘autelofficial @ outlook. com🚘. 👉MS908S Pro is for North & South America only and English only.
- 👍【ECU PROGRAMMING/ CODING FOR SPECIFIC BMW/ BENZ】Coming with J2534 ECU programming device, MS908S Pro is competent for ECU programming and ECU coding for specific BENZ/ BMW only. It program blank ECUs,adapt existed ECU, match components, reflash second-hand ECUs, flash hidden functions,etc. 👉NOTE: Functions not universal, pls send VIN to 🚘autelofficial @ outlook . com🚘 to check.👉For some programming/coding functions, it may need online services, so, make sure it's during free update period.
- 👍【30+ SPECIAL FUNCTIONS FOR PRO】MS908S Pro supports 30+ services on wider car makes: ABS Bleed(also for many VAG cars), Oil Reset, EPB reset, DPF Regen, SAS, Battery Registration, Injector Coding, Power Balance, Crankshaft Variation Learn, etc. Support more cars than MS906/ MP808,etc. With extra MV108 included, it can have a deeper diagnostic on various cars, making your business more professional. 👉NOTE: Functions not universal. Pls send VIN to 🚘autelofficial @ outlook . com🚘. to check.
- 👍【UNMATCHED VEHICLE COVERAGE】MS908S Pro workshop car diagnostic tablet covers more than 80 US, Asian and European vehicle makes and softwares updates most frequent. Compare with MaxiSys MS906/ MP808, Autel MaxiSys MS908S Pro supports more newer cars on OE level full systems diagnostics, have wider coverage on service functions, and support ECU coding on multi-brand car makes.👉NOTE: Functions not universal. Pls send VIN to 🚘autelofficial @ outlook . com🚘. to check.
- 👍【HASSLE-FREE PURCHASE & WORRY-FREE TECH SUPPORTS】Autel MaxiSys MS908S Pro technican's professional car OBD2 computer scanner is backed by Amazon 30 Day worry-free return policy, 1 year seller warranty, lifetime free Autel HQ tech supports. If need any tech support, please feel free to contact via: 🚘autelofficial @ outlook . com🚘. 👉We offer DEAL PRICE for renew for Autel tools, wecome to consult.
- 🚐【25 Special Services + 23 Adaption Functions】 : Autel Maxisys MS908CV, the 2022 new version, is a top heavy duty truck scanner with 25 special services (including Oil Reset, Injector Coding, DPF, EPB, ABS, SRS, Suspension, Throttle ...) and 23 adaption functions (including DOC/DPF Instant Replacement Reset, Fuel Pressure Adaptation Reset, Injector CEOM Reset etc.) to meet all your needs.
- 🚐【OE-Level Full Systems Diagnosis】: Auel truck scanner Maxisys 908CV is an affordable choice to compete with OEM scanners with more advanced functions, while less budget. Autel diesel truck scanner 908cv can read DTCs to locate the fault, clear DTCs to turn off the MIL, retrieve ECU information to learn about the details and views live data. Full-system diagnosis can be applied to Ford truck, Toyota bus, Toyota truck, Nissan, Peugeot, Astra, Champion, Bendix, and more to include 80+ makes.
- 🚐【Advanced ECU Coding】: Autel Maxisys cv ms908cv is equipped with advanced ECU coding which allows you to update the vehicle’s computer software to the latest version, or write in adaptive data for certain components after making repairs or replacements. Maxisys 908CV provides hundreds of methods to improve truck’s performance, like drivability, fuel efficiency, etc. Coding function can be perfectly compatible with Citroen, Dodge, Volvo, Gillig, New Flyer, Nova bus, Pierce and etc.
- 🚐【Designed for Commercial Vehicles】: Autel MS908CV performs diagnosis for heavy trucks, light trucks, natural gas vehicles, construction vehicles, and buses and so on, working with more than 80 commercial vehicle brands, ideal for large repair shops and professional mechanics. As the 2022 new version from Autel, with a 1-year warranty and 24-hour tech support, MS908CV can cover more cars and makes sure that you would not run into any difficulties when using it.
- 🚐【Best Investment with Active Test】: 🅰🆄🆃🅴🅻 Truck scanner MaxiSys MS908CV provides direct access to the vehicle-specific subsystems and components, and output commands to the specific solenoid/relay/ switch to precisely locate faults. Its bidirectional control is applicable for rolling up / down a window, turning the fuel pump on and off, cycling the a/c clutch on and off, and helping with an emissions leak test.
- 🏆【Autel MS909 Intelligent Diagnostics】Autel MaxiSys MS909 Upgrade of Autel Maxisys Elite / MK908P, MS909 scanner for car gives you one-stop intelligent diagnostics that is designed for high-end Autel scanner. MaxiSys scan tool provides step-by-step instructions and comprehensive solutions including topology, TSB, DTC analysis, repair assist, repair tips, how-to videos, etc., which makes you exert diagnostics like a master.
- 🏆【Autel Maxisy MS909 ECU Programming】Autel MS909 automotive tool, a professional Autel scanner, scans all systems and holds powerful functions. ECU programming can customize car settings, enhance vehicle performance, reprogram the new ECU, etc. J2534 ECU programming of car scanner is designed for BMW and Benz to handle complex vehicle issues such as fuel efficiency, power loss, fault codes, and durability of mechanical parts, etc.
- 🏆【Autel Scanner 36+ Functions & Bi-Directional Control】MS909 scan tool also features 36 service functions: Oil Reset, Injector Coding, EPB, TPMS, BMS, ABS Bleeding, DPF, IMMO Keys, SAS, Suspension, Throttle, etc., and runs bi-directional test (active test) to check the functionality of systems and components, helping your win more business.
- 🏆【Autel MaxiSys MS909--99% Coverage on the Market】In addition to the D-PDU/SAE J2534/RP1210 diagnostic protocols, this OBD2 intelligent diagnostic tool MaxiSys Ultra also supports the DoIP and CAN FD protocols for more new vehicle models, covering 99% of vehicles on the market, including supercars.(Only support English)
- 🏆【Advanced Configuration】✅Autel MS909 tool is configured with a 9.7’’ touch screen, ✅Android 7.0 OS, ✅octa-core processor(2.3GHz+1.7GHz), ✅15000mAH 3.8V lithium polymer battery(For 8 hours continuous use), and ✅128GB memory, which improve the diagnostic efficiency. Upgrade version of Autel MK908, MS908S Pro, and Elite, MS909 car scan tool smooths the diagnostic process.
Last update on 2022-01-29 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2022-01-29 / Affiliate links / Images from Amazon Product Advertising API