Instrument Panel Cluster (IPC) Replacement - 2018 Jeep Compass

NUMBER: 08-091-17
GROUP: 08 - Electrical
DATE: September 20, 2017

 

THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE TRANSMITTAL (RRT) 17-091. ALL APPLICABLE SOLD AND UN-SOLD RRT VIN’s HAVE BEEN LOADED. TO VERIFY THAT THIS RRT SERVICE ACTION IS APPLICABLE TO THE VEHICLE, USE VIP OR PERFORM A VIN SEARCH IN TECHCONNECT. ALL REPAIRS ARE REIMBURSABLE WITHIN THE PROVISIONS OF WARRANTY.

THE wiTECH SOFTWARE IS REQUIRED TO BE AT THE LATEST RELEASE BEFORE PERFORMING THIS PROCEDURE.

 

SUBJECT:

Instrument Panel Cluster (IPC) Replacement

 

OVERVIEW:

This bulletin involves replacing the IPC.

 

MODELS:

2018 (MP) Jeep Compass

NOTE: This bulletin applies to vehicles within the following markets/countries: NAFTA.

NOTE: This bulletin applies to vehicles built on August 19, 2017 (MDH 0819XX) equipped with Instrument Panel Parts Module (Sales Code X81) with 160 MPH Primary Speedometer (Sales Code JCC) and Cluster 7.0( Color Driver Info Display (Sales Code JAJ).

 

SYMPTOM/CONDITION:

The customer may experience a high line instrument cluster resetting during certain high BUS load scenarios while driving, with normal cluster operation restored in 3-5 seconds.

 

DIAGNOSIS:

Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all related systems are functioning as designed.

If a customer’s VIN is listed in VIP or your RRT VIN list, perform the repair. This RRT only applies to vehicles on the RRT VIN list.

 

PARTS REQUIRED:

Qty. Description Part No.
1 Cluster, Instrument Panel 6QR57DX9AA

NOTE: The IPC will need to be ordered through the exchange center.

 

REPAIR PROCEDURE:

  1. Replace the IPC with updated cluster. Refer to the detailed service procedures available in DealerCONNECT> TechCONNECT under: Service Info> 08 - Electrical> Instrument Cluster> Removal/Installation.

 

POLICY:

Reimbursable within the provisions of the warranty.

 

TIME ALLOWANCE:

Labor Operation No: Description Skill Category Amount
08-45-10-9M Cluster, Instrument Panel (IPC) - Replace (1 - Semi-Skilled) 6 - Electrical and Body Systems 0.5 Hrs.

 

FAILURE CODE:

ZZ Service Action

NUMBER: 08-091-17
GROUP: 08 - Electrical
DATE: September 20, 2017

https://www.nhtsa.gov/recalls?nhtsaId=10121803

https://static.nhtsa.gov/odi/tsbs/2017/MC-10121803-9999.pdf

Download (PDF, 30KB)


 

Chrysler J2534 Application Overview

 

DRB III Emulator

Flash Availability - J2534/Pass Thru Device

Vehicle to Diagnostic Tool Reference Chart

 

Chrysler Recommended J2534 Devices

For Chrysler recommended J2534 device, see below table.

J2534 Device Firmware Version
CTC Vehicle Box * 1.9
UCAN 2 1.0
Blue Streak -2534 Global Programmer 2.10
Actia I+ME Passthru 2.07

* Chrysler recommends the CTC Vehicle Box Device for Chrysler SCI ECU reprogramming. SCI reprogramming is used on most PCMs and TCMs prior to the introduction of CAN bus vehicles which began in 2004 (Durango).

 

Compatible J2534 Devices

CarDAQ-Plus 2 Diagnostic Code Reader and J2534 Programming Tool
Drew Technologies (DRWCDPLUSKIT) CarDAQ-Plus J2534 Flash Reprogramming Kit
CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware
VSI J2534 ECU Reprogrammer & Diagnostic Adapter
Autel MaxiFlash Elite J2534 ECU Programming Tool
Dearborn d-Bridge Adapter J2534 OBDII Engineering Tool
Drew Tech Mongoose Chrysler Pro Oem Diagnostics And Programing Cable Chrysler

 

Chrysler J2534 Manual

wiTECH Software

www.techauthority.com

 

 

Bestseller No. 1
CarDAQ-Plus 2 Diagnostic Code Reader and J2534 Programming Tool
  • The CarDAQ-Plus2 is the next generation Drew Technologies J2534-1 and J2534-2 device with advanced support for J2534 v05.00 and DoIP.
  • Features High Speed USB and support for global vehicles.
  • Meets all of today's SAE J2534 standards.
  • Rugged plastic case included for safe and convenient transporting.
  • Free J2534 Toolbox application, online software updates and phone support.
Bestseller No. 3
Autel MaxiCOM MK908P Diagnostic Tool Automotive Full System Diagnoses Coding and J2534 ECU Programming, The Upgraded Version of MS908P
  • ECU PROGRAMMING: The diagnostic tool comes with a J2534 ECU programming device that helps Benz and BMW users replace the existing software/firmware in the ECU, program new ECUs and fix software-controlled driving performance and emission issues.
  • VEHICLE COVERAGE: The software of MK908P has a wide range of compatibility and can be used to diagnose vehicles from over 80 brands in the US, Europe and Asia. Moreover, you can get more newly added car models with the fast-release software update service.
  • ADVANCED HARDWARE: MK908P, as the advanced version of MS908P, features the 10. 1" 1920*1200 screen upgraded from 9. 7" 1024*768, and the battery capacity is 15000mAh increased by 4000 mA. Also, it has a better anti-impact protection design.
  • BI-DIRECTIONAL CONTROL: The diagnostic tool supports bi-direction control to check the vehicle operating conditions. The bi-directional control of the ECM in Component Test enables the MK908P to transmit control commands to operate the vehicle systems.
  • ADDITIONAL SERVICE: The MK908P is designed to serve users with a rich array of easy-to-use functions and features. The Maxi Fix provides you with an online troubleshooter database, and Remote Desk allows you to get help from others via TeamViewer software.
Bestseller No. 4
VXDIAG VCX NANO Toyota and Lexus Diagnose and Programming Tool Compatible with SAE J2534 WiFi Version
  • VCX is designed on the basis of the latest automotive international standards so that it can support many professional automotive diagnostic applications
  • WIFI Version VXDIAG VCX Nano for TOYOTA and Lexus, support both USB connection and WIFI connection, support latest version software, Compatible with varieties protocols. can be very easy to connect various automotive bus to a PC
  • OS support both WINDOWS XP and Windows 7, Software support multi-languages: Chinese, English, French, Italian, Spanish, German, ec
  • Small size, easy to carry and convenient for us
  • One year warranty
Bestseller No. 5
Autel Maxisys MS908CV Heavy Duty Diagnostic Scan Tool With J-2534 ECU Programming,Bluetooth/Wifi Enabled & Wireless Connection
  • POWERFUL DIAGNOSIS &ANALYSIS: The Autel Maxisys MS908CV is especially made for working on Heavy Duty vehicles. It contains a whole set of heavy duty vehicle connectors and provides access to all the commonly performed service functions: Oil Reset, EPB, Brake Bleeding, DPF & SCR, Immo & keys, Injector Throttle and other regular maintenance functions.
  • ADVANCED ECU CODING & PROGRAMMING: The complete diagnostic tool kit includes a compact sized MaxiFlash Elite which performs J2534 and J2534-2 pass-thru programming and provides Bluetooth VCI communication between the vehicle and the MaxiSys CV tablet.
  • SPECIAL FUCTIONS: The diagnostic scan tool provides the special functions that complete repairs including Injector Quantity Adjustment, DPF Regeneration, Adaptations, Calibrations, Maintenance Resets.
  • STRONG FEATURES: The automotive scanner read and clear codes, view and graph live data, perform tool-guided maintenance services, complete an array of special functions and diagnose manufacturer-specific systems including Allison transmissions, Bendix ABS Brake systems, Detroit Diesel Engines and Eaton and Wabash ABS trailer brakes.
  • WIDE VEHICLE COVERAGE: Extensive vehicle coverage for more than 80 US, Asian and European commercial vehicles and industrial machine brands.
Bestseller No. 6
Autel MaxiCOM MK908P Diagnostic Scanner Automotive Scan Tool with ECU Programming and J2534 Reprogramming + Free Oscilloscope MaxiScope MP408
  • 【SUPERIOR CODING & PROGRAMMING】 Supports coding and programming especially for BMW and Mercedes. With the VCI of MK908P for SAE J2534-1 and J2534-2 protocols, it can replace the existing software and firmware in ECU without expensive original equipment.
  • 【WIDE DIAGNOSTIC SOLUTIONS】 Well capable of VCM coding and programming, TPMS coding, intelligent cruise control (ICC), ECU coding, live data, dashboard matching, airbag system reset, anti-theft key matching and more.
  • 【POWERFUL DIAGNOSTIC TOOL】 The oscilloscope MP408 combine with MaxiCOM MK908P is able to measure and test virtually all the electrical and electronic components and circuits in any modern vehicles, providing you an insight to the inner workings of a vehicle's electronic circuits.
  • 【HIGH-EFFICIENCY OF USE】 Being MS908P upgraded, it is Autel's latest and most sophisticated diagnostic scanner which boasts the best hardware including Hexa-CPU, 2GB RAM etc. for fast boot-up and multitasking, and the ergonomic design to resist damage of heavy use.
  • 【WARRANTY & UPDATE】 You can get quality related services within 12 months warranty, besides, 12 months free online update is available for the latest bug fixes and newly added parameters and car models.
Bestseller No. 7
Autel Maxisys CV MS908CV Heavy Duty Diagnostic Tool with J-2534 ECU Programming, BT, WiFi Connection
  • The Autel Maxisys MS908CV is especially made for working on Heavy Duty vehicles. It contains a whole set of heavy duty vehicle connectors and provides access to all the commonly performed service functions: Oil Reset, EPB, Brake Bleeding, DPF & SCR, Immo & keys, Injector Throttle and other regular maintenance functions
  • The complete diagnostic tool kit includes a compact sized MaxiFlash Elite which performs J2534 and J2534-2 pass-thru programming and provides BT VCI communication between the vehicle and the MaxiSys CV tablet.
  • The diagnostic scan tool provides the special functions that complete repairs including Injector Quantity Adjustment, DPF Regeneration, Adaptations, Calibrations, Maintenance Resets.
  • The automotive scanner read and clear codes, view and graph live data, perform tool-guided maintenance services, complete an array of special functions and diagnose manufacturer-specific systems including Allison transmissions, Bendix ABS Brake systems, Detroit Diesel Engines and Eaton and Wabash ABS trailer brakes.
  • Extensive vehicle coverage for more than 80 US, Asian and European commercial vehicles and industrial machine brands.
Bestseller No. 8
Autel Maxisys Pro MS908p Wifi Automotive Diagnostic Tool with J2534 ECU Programming Free Updated Online
  • The MaxiSys Diagnostic Platform is an evolutionary smart solution for specialized automotive diagnosis and ECU programming
  • Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes
  • 9.7 inch 1,024x768 LED-backlit glossy widescreen Multi Touch display with IPS technology
  • Complete capabilities for codes, live data, actuation tests, adaptations, coding and ECU programming
  • One Year Free Update Online, Free Shipping by DHL All Around the World, 3-5 Days Delivery
Bestseller No. 9
Autel MK908P Diagnostic Scanner J2534 ECU Programming, Coding, Bi-Directional Control, Complete Systems Diagnoses with MaxiVideo MV105 
  • SUPERIOR PERFORMANCE:This Android4.4 based high-end diagnostic scanner is designed with the advanced hardware configurations including super-fast hexa-core Processor, 2GM RAM, 64GB On-board Memory, 8.0 Megapixel rear cam, ultra-clear 10.1 inches LED screen etc. It more superior than Autel Maxisys PRO.
  • ECU CODING/PROGRAMMING: This top-level OBD2 scanner comes with a SAE J2534-1 & -2 compliant PassThru reprogramming interface device which allows you to use the updated OEM software to replace the existing software/firmware in ECUs, programming new ECUs for Benz/BMW and fixing software-controlled drivability issues and emission issues.
  • EXTENSIVE COVERAGE: This Autel scanner same function as the Maxisys elite, MS908S PRO, MS908E with Full OBD functions, 11 reset functions and full systems diagnoses for codes, live data, actuation test, adaptations, ECU coding ,work on over 80 1996 US-based , 2000 European-based and newer OBD2/EOBD protocol vehicles.
  • CONSIDERATE COMBINATION: Wonderful for up-close visual inspections in confined areas, such as engine cylinders and small part inspections with MV105, the internal situation will be displayed on the tablet--- more convenient to find the vehicle problems.
  • DATA MANAGEMENT OPERAION: In order to bring convenience for users to manage all the data and parameters stored in this diagnostic tool, Autel MK908P supports the following user-friendly managing functions: Shop Manager Operation, MaxiFix Operation, Data Manager Operation, etc. to quickly and directly select the required referring information while diagnosing.
SaleBestseller No. 10
Autel MK908P Diagnostic Scanner (MS908P MaxiSys Pro Upgraded) J2534 ECU Programming, Coding, Bi-directional Control, Complete Systems Diagnoses with 1 Year Free Online Update for DIYers, Professionals
  • CERTIFIED BY AUTHORITY: As an upgraded version of the MS908P,same function as MS908S PRO and MaxiSys Elite. This superior diagnostic device is awarded as the Best Vehicle Diagnostic Tool in Britain, and characterized by its high-end diagnostic features with easy-to-use operations. It's an ultimate car scanner for DIYers, experienced mechanics, even garage to finish professional-level vehicle repair and maintenance.
  • ECU CODING/PROGRAMMING: This top-level OBD2 scanner comes with a SAE J2534-1 & -2 compliant PassThru reprogramming interface device which allows you to use the updated OEM software to replace the existing software/firmware in ECUs, programming new ECUs for Benz/BMW and fixing software-controlled drivability issues and emission issues.
  • TOP-LEVEL CONFIGURATION: This Android4.4 based high-end car scanner is designed with the advanced hardware configurations including super-fast hexa-core Processor, 2GM RAM, 64GB On-board Memory, 8.0 Megapixel rear cam, ultra-clear 10.1 inches LED screen etc. for users to detect the problems of the given vehicle efficiently and accurately.
  • ABUNDANT VEHICLE MODELS: This diagnostic scan tool is built for testing more than 80 US, Asian and European vehicle makes and you can use it to test more vehicles when you complete the update at our official website once in a while. It is basically a bidirectional scanner that allows you to send and receive data to and from a car's control modules.
  • DATA MANAGEMENT OPERAION: In order to bring convenience for users to manage all the data and parameters stored in this diagnostic tool, Autel MK908P supports the following user-friendly managing functions: Shop Manager Operation, MaxiFix Operation, Data Manager Operation, etc. to quickly and directly select the required referring information while diagnosing.

Last update on 2019-04-24 / Affiliate links / Images from Amazon Product Advertising API

Last update on 2019-04-24 / Affiliate links / Images from Amazon Product Advertising API

Leave A Comment

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.