Z50 – Damaged Tail Light Side Marker Assembly – 2021-2022 Jeep Grand Cherokee

July 28, 2022 NHTSA CAMPAIGN NUMBER: 22V544000

Damaged Tail Light Side Marker Assembly/FMVSS 108

A tail light side marker that does not illuminate can reduce vehicle visibility to other drivers, increasing the risk of a crash.

 

NHTSA Campaign Number: 22V544

Manufacturer Chrysler (FCA US, LLC)

Components EXTERIOR LIGHTING

Potential Number of Units Affected 99,186

 

Summary

Chrysler (FCA US, LLC) is recalling certain 2022 Jeep Grand Cherokee and 2021-2022 Jeep Grand Cherokee L vehicles. The tail light side marker assemblies may be damaged and not illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, “Lamp, Reflective Devices, and Associated Equipment.”

 

Remedy

Dealers will inspect and replace both body-mounted tail light assemblies, as necessary, free of charge. Interim owner notification letters were mailed September 16, 2022. Owners will receive a second notice once remedy parts become available in June 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC’s number for this recall is Z50.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check if your Vehicle has a Recall

 


New Safety Recall Advanced Communication – Z50

FCA US LLC (FCA US) has announced a safety recall on certain 2021 and 2022 Model Year (WL) Jeep® Grand Cherokee vehicles.

 

REASON FOR THIS SAFETY RECALL

Some of the above vehicles may have been built with a damaged taillamp/side marker which may result in a nonfunctional taillamp/side marker. Vehicles with inoperative taillamp/side marker may result in an approaching vehicle being unaware of the position and dimensions of the vehicle and can cause a crash without prior warning.
The condition described above does not comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 108 requires each vehicle to be equipped with at least two red steady burning taillamp-side markers.

 

SERVICE ACTION

FCA US will conduct a voluntary safety recall to inspect and replace both body mounted tail lamp assemblies as needed. Dealers will be notified of the launch of this safety recall by way of established communication methods. This recall is estimated to launch in 3rd Quarter of 2022.

 


2 Affected Products

Vehicle

MAKEMODELYEAR
JEEPGRAND CHEROKEE2021-2022

 


7 Associated Documents

Recall Acknowledgement

RCAK-22V544-6635.pdf 645.188KB

 


Manufacturer Notices(to Dealers,etc) – New Safety Recall

RCMN-22V544-8599.pdf 19.522KB

 


Noncompliance Notice 573 Report

RCLRPT-22V544-9892.PDF 215.626KB

 


Manufacturer Notices(to Dealers,etc) – NSRAC re new safety recall

RCMN-22V544-1970.pdf 55.77KB

 


Manufacturer Notices(to Dealers,etc) – NSRAC re FCA US LLC (FCA US) has announced a safety recall on certain 2021 and 2022 Model Year (WL) Jeep® Grand Cherokee vehicles

RCMN-22V544-7264.pdf 126.091KB

 


ISSUED Interim Owner Notification Letter(Part 577)

RIONL-22V544-5696.pdf 63.02KB

 


Recall 573 Report – 3/2/23

RCLRPT-22V544-6325.PDF 215.649KB

 


Latest Recalls Documents

 


Bestseller No. 1
MAYELLO LED Tail Lights Compatible with Jeep Wrangler JK JKU 2007-2018 Smoked Lens w/Brake Light Running Light Reverse Lights 2PCS
  • ALL-IN-ONE LED TAIL LIGHT:Integrated with brake light,reverse light, and running light—all in one compact unit. Equipped with a high-precision constant current driver chip for stable output, low voltage protection, and long-term durability
  • BUILT TO LAST:Crafted from high-quality ABS housing and premium-grade LEDs. Our Wrangler JK tail lights deliver brighter illumination with lower power consumption than factory bulbs—rated for over 50,000 hours of use
  • PERFECT FIT:Compatible with Jeep Wrangler JK and JKU 2007–2018 , including both 2-door and 4-door versions. Direct replacement for OEM tail lights—no modification needed
  • QUICK PLUG-AND-PLAY INSTALLATION:No drilling or rewiring required. Simply unscrew the stock lights and plug these into the existing factory sockets—installation takes just 15 minutes or less
  • WHAT YOU GET:Package includes 2pcs MAYELLO LED rear tail lights for Wrangler JK JKU (2007–2018). A functional and stylish upgrade that enhances visibility and safety on the road.
SaleBestseller No. 2
AUDEXEN LED Tail Lights Compatible with Jeep Wrangler JK JKU 2007-2018, Unique C Shaped Design Smoked Lens, 20W Reverse Lights, Built-in EMC, DOT Compliant, 2 PCS
  • 20W high-power reverse light with IP67 waterproof rating for all-weather durability, withstands heavy rain and car washes
  • Integrated EMC protection featuring quick-connect design – true plug-and-play installation requires no tools
  • Direct fit replacement for Jeep wrangler JK & JKU models 2007-2018 (exact OEM spec match)
  • Complete kit includes 2 led tail lights + illustrated instruction manual for hassle-free setup
  • Next-gen triple-function lighting system: super-bright reverse/brake/running lights with DOT-compliant safety & energy-efficient design
Bestseller No. 3
Smoked Halo Tail Lights Square Rear Combination Tail Lights Lamps Assembly Replacement for 1976-2006 Wrangler YJ CJ5 CJ7 with Passenger and Driver Side Marker Stop Turn Signal Brake Lights, 2Pcs
  • This Halo LED tail light assembly kit features smoked lens design and is compatible with multiple models, including the 1997-2006 Wrangler, 1976-1986 CJ7, 1981-1985 CJ8, 1987-1995 Wrangler YJ, and 1976-1983 CJ5. The kit includes side marker lights for both the driver and passenger sides. Please note that it is NOT PLUG AND PLAY; some modifications may be necessary for installation.
  • Get ready for outstanding illumination with our red rear combination tail lights kit. It includes 32 large brake, parking, and directional Halo LEDs, along with 6 license plate light LEDs, 18 brilliant white back-up LEDs, and 3 side reflector light LEDs. The smoke lens adds a unique touch to your truck. Please be aware that stock lights with incandescent systems may cause flashes; in these instances, resistors (NOT INCLUDED) may be required.
  • Enhance your vehicle's appearance with these impressive Halo LED tail light assemblies. Here are the wiring tips: white is for ground, blue wire is for backup reverse light, black wire is for tail/license plate light/side marker light, and red wire is for stop turn brake light. Please verify that the wiring matches your stock lights before making a purchase.
  • Simplify installation by easily removing the lens and light housing. Elevate your vehicle's appearance with striking LED tail light assemblies. Our rear square tail lights necessitate a bolt-in replacement, with a bolt distance of around 2 inches. You'll need to cut the stock tail lamp pigtail and splice it onto the new assembly using the provided hardware.
  • Replacement number: Left Side: 56018649, 56018649AD, 56016721, CH2800120, CH2800161, Right Side: 56018648, 56018648AD, 56016720, CH2801120, CH2801161.
SaleBestseller No. 4
Tail Lights Assembly Replacement for 1979-2006 Wrangler YJ CJ5 CJ7 Red Square Rear Combination Tail Lamps with Passenger and Driver Side Marker Stop Turn Signal Brake Lights DOT Certified, 2Pcs
  • This LED tail lights assembly kit with smoke lens design, is compatible with various models: 1997-2006 Wrangler, 1976-1986 CJ7, 1981-1985 CJ8, 1987-1995 Wrangler YJ, and 1976-1983 CJ5, , but NOT for JK; NOTE: Please note that stock lights with incandescent systems may cause flashes; in such cases, resistors (NOT INCLUDED) might be necessary. If it flash quickly for some old bulb vehicle, you may need a 5W 10ohm resister or a new electronic flasher, NOT PLUG AND PLAY, some modifications may be required for installation.
  • DOT Certified. Experience exceptional illumination with our red rear combination tail lights kit. It features 16 large brake, parking, and directional LEDs, 6 license plate light LEDs, 21 brilliant white Back-Up LEDs, and 3 side reflector marker light LEDs. The red tail light with side marker adds a distinctive touch to your truck. Legal on road with updated version with side markers;
  • Upgrade your stock tail lights with these awsome LED tail lights assembly. Wiring tips: White is ground, blue wire is for backup reverse light, black wire is for tail/license plate light/side marker light, and red wire is for stop turn brake light. Please ensure the wiring matches your stock lights before purchasing.
  • The lens and light housing can be removed, making installation easier. Enhance the look of your vehicle with eye-catching LED tail lights assemblies. Our rear square tail lights require a bolt-in replacement, with a bolt distance of approximately 2". You will need to cut the stock tail lamp pigtail and splice it onto the new assembly using the included hardware.
  • Replacement number: Left Side: 56018649, 56018649AD, 56016721, CH2800120, CH2800161, Right Side: 56018648, 56018648AD, 56016720, CH2801120, CH2801161.
Bestseller No. 5
Tail Lights fits 2005-2007 Jeep Liberty Limited Sport Rocky Mountain
  • Tail lights assembly compatible with 2006 Jeep Liberty 65th Anniversary Edition For Models Without Tail Lamp Guard; 2005-2006 Jeep Liberty Limited For Models Without Tail Lamp Guard; 2005-2006 Jeep Liberty Renegade Sport Utility; 2005 Jeep Liberty Rocky Mountain Edition For Models Without Tail Lamp Guard; 2005-2006 Jeep Liberty Sport For Models Without Tail Lamp Guard; 2007 Jeep Liberty Limited Sport
  • The light source of this taillight is halogen type. Soft light and easy maintenance
  • Installation is simple and convenient. The light source is stable. The material can adapt to rain,snow,high temperature weather
  • The rear lights are built to original factory standards. Direct fit replacement for taillight part number: 55157061AG,CH2800158
  • Please check the model and year of the lights before purchase. After receiving the package,please check the tail light housing and plug pins for better installation.

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...