“This site contains affiliate links for which OEMDTC may be compensated” |
August 10, 2023 NHTSA CAMPAIGN NUMBER: 23V565000
Obstructed Center High Mount Brake Light/FMVSS 108
A brake light that is obstructed may not be visible to other drivers to indicate the intention to slow or stop, increasing the risk of a crash.
NHTSA Campaign Number: 23V565000
Manufacturer Chrysler (FCA US, LLC)
Components EXTERIOR LIGHTING
Potential Number of Units Affected 16
Summary
Chrysler (FCA US, LLC) is recalling certain 2023 Jeep
Wrangler vehicles. The spare tire may obstruct the view of the center high-mount brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Dealers will replace the spare tire carrier assembly, free of charge. Owner notification letters are expected to be mailed September 29, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC’s number for this recall is 84A.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your Vehicle has a Recall
New Safety Recall Advanced Communication – 84A
FCA US LLC (FCA US) has announced a safety recall on certain 2023 Model Year (JL) Jeep Wrangler vehicles equipped with a 33-inch diameter tire.
REASON FOR THIS SAFETY RECALL
The spare tire carrier on some of the above vehicles may have been built with an incorrect Center High Mount Stop Lamp (CHMSL) bracket assembly. A CHMSL that is partially obstructed may not have adequate conspicuity to other drivers to indicate the intention to slow or stop, which can cause a crash without prior warning.
Federal Motor Vehicle Safety Standard (FMVSS) No. 571.108 S6.1.3.1 requires that “Each lamp…must be securely mounted…and in a location where it complies with all applicable photometric requirements in S7.9.13 Photometry. Each high-mounted stop lamp must be designed to conform to the photometry requirements of Table XV…”. Subject vehicles do not meet these photometry requirements.
SERVICE ACTION
FCA US will conduct a voluntary safety recall on all affected vehicles to replace the spare tire carrier assembly. The remedy for this condition is not currently available. Dealers will be notified of the launch of this safety recall by way of established communication methods. This recall is estimated to launch in 3rd Quarter of 2023
Chronology :
- On April 18, 2023, the FCA US LLC (“FCA US”) Technical Safety and Regulatory Compliance (“TSRC”) organization opened an investigation into 2023 MY Jeep
Wrangler vehicles built with a spare tire carrier assembly which may result in the spare tire obstructing the CHMSL.
- From April 2023, through July 2023, FCA US TSRC reviewed vehicle records and met with FCA US Engineering, FCA US Supplier Quality, and the supplier to review manufacturing and supplier data to understand the condition and determine the suspect population.
- On July 12, 2023, FCA US TSRC recognized a vehicle build issue exists on certain vehicles related to an obstructed CHMSL, potentially resulting in a noncompliance with FMVSS No. 108.
- On August 3, 2023, FCA US determined, through the Vehicle Regulations Committee, to conduct a voluntary safety recall of the affected vehicles.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
JEEP![]() | WRANGLER | 2023 |
4 Associated Documents
Recall Acknowledgement
RCAK-23V565-6053.pdf 645.238KB
Noncompliance Notice 573 Report
RCLRPT-23V565-2232.PDF 214.269KB
Manufacturer Notices(to Dealers,etc) – New Safety Recall Advanced Communication – 84A
Manufacturer Notices(to Dealers,etc) – New Safety Recall Advanced Communication – 84A
Latest Recalls Documents
- Non-polarity. Can be used for brake lights, tail lights, stop lights, parking light, daytime running light, etc. Some sensitive vehicles will meet canbus issue after installing, load resistors or flasher relay will be required to solve these issues, you can contact us through Amazon Buyer Message to get help and solutions
- Low power and high brightness. 5.5W per 7443 led red bulb. Only 1/4 energy consumption of original 7443 red bulb but 4 times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
- Unique imitated halogen shape design. Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the light. Delivering 360° high luminous efficiency with full amber light, easier to be noticed and safer to drive
- Small size comparable to OEM 7440 bulbs Non-polarity, applied to US standard and CK sockets. Fits: 992, 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440NA, 7440NAK, 7444NA,7444NAK, 7443LL.etc. Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your vehicle owner manual to confirm or ask a question for help
- Electroplating process housing. Improves oxidation resistance and produces less heat. High-end styling, matching great in the assembly. Ideal replacement for your halogen 7440 red bulbs
- Fits: 1988-1999 Fullsize Pickup Truck
- Meets or Exceeds DOT & SAE Standards
- Direct OEM Replacement No Modification Needed
- New Aftermarket Part, Includes Both Driver & Passenger Side
- (Set of 2) Important Notice: This type bulbs are for brake lights use, please check OEM bulb's part number to confirm it is 7440 or 7443 before purchasing. Strobe Function: 7443 Strobe led lights bulbs will flash 3 times on-and-off and then keep solid light (Legal blinking times) to avoidthe rear-end collision.
- Due to LED bulbs draw less power than stock incandescent lamps, extra LED resistors maybe required to avoid the flickering or error code. LED Chips: Each 7443 LED strobe bulb is equipped with 39 pieces high quality,high power and high performance 2835 led chips; 360° full angle illumination light ouput with projector lens.
- Universal fits T20 wedge 7440 single filament and 7443 dual filament W3x16Q base, big difference between high and low intensity light output, replacing rear 7440 7443 brake stop light, center high-mount stop ( 3rd brake ) lights lamps,etc.
- The length is about 2.09 inch. Cross reference number: 7440, 7441, 7443, 7443LL, W21/5W, 7443/26201, 78660, 78661, 17919, 7515, HIB7443WM, W21W, 7440/26200, 17632, 7504, 7440LL, 7443-SRCK, 7443-CK,etc.
- Newly upgraded version, built-in USA-made smart IC driver for the best light performance and longer lifespan. USA located, Fully One Year Warranty. Compatible with both standard type and CK/SRCK type. Voltage: 12V - 24VDC.
- Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- Longer Life Than Most Standard Bulbs: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the 3157 led bulb. Delivering 360° high luminous efficiency with full brilliant red light, more visible when braking
- 5.5W per 3157 red bulb. Only 1/4 energy consumption of original bulb but 4 times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
- Electroplating process housing. Improve oxidation resistance and produce less heat. High-grade shape, matching great in the assembly. Ideal replacement for your halogen bulbs
- Small size comparable to OEM bulbs. Non-polarity, applied to US standard and CK sockets. Can be used for turn signal bulb, side marker light bulb, blinker light bulb, parking lights, etc. Fits: 3056 3156 3157 3157K 3057R 4057 4157, etc.
- Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your owner manual to confirm or ask a question for help
- LIGHTS DIM OVER TIME, REPLACE IN PAIRS: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- EASY TO REPLACE: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- LOW MAINTENANCE AND HIGH DURABILITY: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- LONGER LIFE THAN MOST STANDARD BULBS: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- THE SYLVANIA STANDARD OF QUALITY: With 100+ years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- Twice the life of standard incandescent bulbs
- Best value
- Original equipment quality seal for the most reliable performance
- Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Bulbs dim over time.
- Miniature bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting
- Key Specs: Voltage DC 12V-24V, 6500K Brilliant Red, Wattage 3w, low power consumption and fast heat dissipation for longer lifespan. The 3157 led light bulbs are compatible with 3056 3156 3157 3157K 3057R 4057 4157 etc.
- High Quality: iFunyLed 3157 led lights use high quality LED chips and circuit boards, built-in intelligent IC driver, hardly delaying or flickering, bulb life up to 50,000 hours.
- Wide Applicability: iFunyLED 3157 Red LED bulbs can used as brake lights, tail lights, turn signal lights, daytime running lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights. Easy to install, just plug and play.
- 300% Brighter: Our 3157 bulb has 54 pieces of 3014 led chips on it, 360 degree lighting angle, no blind spot.
- Professional Service: Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- (Set of 2) Important Fitment Guide: Please make sure the OEM bulb's part number matches below cross reference number before purchasing and make sure to purchase the correct items, if purchased wrongly, it won't fit. LED Chips: Each 3156/3157 LED red bulb is equipped with 39 pieces high quality, high power with high performance 2835 SMDs, 360° full angle illumination with projector lens.
- Important NOTICE: Extra LED resistors are required to avoid the signal hyper flash or error code for LED bulbs draw less current than stock incandescent lamps. Compatible with both standard and CK / SRCK type. Voltage: 12V~14.8V, Built in stable current IC driver for longer lifespan. Color: Pure red.
- W2.5x16q D.F. base, Dual filament LEDs are universal fit for single filament and dual filaments T25 wedge base bulbs.Cross reference number: 3156, 3056, 3047, 3047LL, 3047K, 3055, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157 ,3157K, 3157X, 3157LL, 3157ST, 3157KX, 3357, 3357LL, 3357K, 3457, 3457K, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, p27/7w, etc.
- Non-polarity. Application: Used for upgrading OEM dim incandescent or damaged rear turn signal lights, directional blinker lamps, brake stop tail lights, taillights, rear side marker light lamps for automotive cars, trucks, motorcycles, SUVs, vans.
- Light output: about 800 lumens per bulb, total 1600 lumens for both LED bulbs. Product Dimension(inches): 2.15" x 1.67"x0.71". Newly upgraded smart IC driver for better performance and longer lifespan. USA located. Warranty: fully ONE YEAR guaranteed for the manufacturer defect.
- Twice The Life Of Standard Incandescent Bulbs
- Philips Offers A Wide Range Of Smart Light Bulbs, Lamps, Fixtures And Accessories
- Original Equipment Quality Seal For The Most Reliable Performance
- Always Replace In Pairs To Ensure A Symmetric Light Beam From Both Bulbs On The Road. Bulbs Dim Over Time
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-565 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Chrysler (FCA US, LLC) Submission Date : AUG 10, 2023 NHTSA Recall No. : 23V-565 Manufacturer Recall No. : 84A Manufacturer Information : Manufacturer Name : Chrysler
(FCA US, LLC) Address : 800 Chrysler
Drive CIMS 482-00-91 Auburn Hills MI 48326-2757 Company phone : 1-800-853-1403 Population : Number of potentially involved : 16 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2023-2023 Jeep
Wrangler Vehicle Type : Body Style : SUV Power Train : NR Descriptive Information : Some 2023 MY Jeep
Wrangler vehicles may be equipped with a spare tire carrier assembly built with an incorrect center high mount stop lamp (“CHMSL”) bracket assembly. The suspect period began on February 9, 2023, when suspect spare tire carrier assemblies were introduced into vehicle production, and ended on February 14, 2023, when suspect spare tire carrier assemblies were no longer used in vehicle production. Production and supplier records were used to identify the suspect period. Similar vehicles not included in the recall were built with a correct spare tire carrier assembly, or were built before or after the suspect period. Production Dates : FEB 09, 2023 – FEB 14, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : Federal Motor Vehicle Safety Standard (“FMVSS”) No. 571.108 S6.1.3.1 requires that “Each lamp…must be securely mounted…and in a location where it complies with all applicable photometric requirements in S7.9.13 Photometry. Each high-mounted stop lamp must be designed to conform to the photometry requirements of Table XV…”. Subject vehicles do not meet these photometry requirements. FMVSS 1 : 108 – Lamps, reflective devices, and assoc. Equipment FMVSS 2 : NR Part 573 Safety Recall Report 23V-565 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Description of the Safety Risk : A CHMSL that is partially obstructed may not have adequate conspicuity to other drivers to indicate the intention to slow or stop, which can cause a crash without prior warning. Description of the Cause : NR Identification of Any Warning that can Occur : None Involved Components : Component Name 1 : Spare Tire Carrier Assembly Component Description : Carrier Assembly – Spare Tire Component Part Number : 68479193AC Supplier Identification : Component Manufacturer Name : GRAMMER AMERICAS Address : 1429 COINING DR TOLEDO Ohio 43612-2932 Country : United States Chronology : • On April 18, 2023, the FCA US LLC (“FCA US”) Technical Safety and Regulatory Compliance (“TSRC”) organization opened an investigation into 2023 MY Jeep
Wrangler vehicles built with a spare tire carrier assembly which may result in the spare tire obstructing the CHMSL. • From April 2023, through July 2023, FCA US TSRC reviewed vehicle records and met with FCA US Engineering, FCA US Supplier Quality, and the supplier to review manufacturing and supplier data to understand the condition and determine the suspect population. • On July 12, 2023, FCA US TSRC recognized a vehicle build issue exists on certain vehicles related to an obstructed CHMSL, potentially resulting in a noncompliance with FMVSS No. 108. • On August 3, 2023, FCA US determined, through the Vehicle Regulations Committee, to conduct a voluntary safety recall of the affected vehicles. Part 573 Safety Recall Report 23V-565 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : FCA US will conduct a voluntary safety recall on all affected vehicles to replace the spare tire carrier assembly. FCA US has a longstanding policy and practice of reimbursing owners who have incurred the cost of repairing a problem that subsequently becomes the subject of a field action. To ensure consistency, FCA US, as part of the owner letter, will request that customers send the original receipt and/or other adequate proof of payment to the company for confirmation of the expense. How Remedy Component Differs from Recalled Component : The remedy component will be a spare tire carrier assembly that meets FMVSS No. 108 Photometry requirements. Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : **08/10/2023: FCA US will notify dealers and begin notifying owners on or about 09/29/2023. Planned Dealer Notification Date : SEP 29, 2023 – SEP 29, 2023 Planned Owner Notification Date : SEP 29, 2023 – SEP 29, 2023 * NR – Not Reported
**************************************************************************************************************
08/17/2023 _____________________________________________________________________ New Safety Recall Advanced Communication – 84A FCA US LLC (FCA US) has announced a safety recall on certain 2023 Model Year (JL) Jeep Wrangler vehicles equipped with a with a 33-inch diameter tire. VINs identified as being involved in this campaign are currently live and searchable. Stop sale is in effect for the above-identified vehicles. Vehicles impacted by a stop sale are eligible for reimbursement allowance through the Recall Floorplan Reimbursement Policy (RFPRP), which can be requested upon recall claim submission. REASON FOR THIS SAFETY RECALL The spare tire carrier on some of the above vehicles may have been built with an incorrect Center High Mount Stop Lamp (CHMSL) bracket assembly. A CHMSL that is partially obstructed may not have adequate conspicuity to other drivers to indicate the intention to slow or stop, which can cause a crash without prior warning. Federal Motor Vehicle Safety Standard (FMVSS) No. 571.108 S6.1.3.1 requires that “Each lamp…must be securely mounted…and in a location where it complies with all applicable photometric requirements in S7.9.13 Photometry. Each high-mounted stop lamp must be designed to conform to the photometry requirements of Table XV…”. Subject vehicles do not meet these photometry requirements. SERVICE ACTION FCA US will conduct a voluntary safety recall on all affected vehicles to replace the spare tire carrier assembly. The remedy for this condition is not currently available. Dealers will be notified of the launch of this safety recall by way of established communication methods. This recall is estimated to launch in 3rd Quarter of 2023. We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries regarding involved vehicles. Customer Services Field Operations FCA US LLC IMPORTANT: Some of the involved vehicles may be in dealer new vehicle inventory. Federal law requires you to complete this recall service on these vehicles before retail delivery. Violation of this requirement by a dealer could result in a civil penalty of up to $21,000 per vehicle. Involved vehicles can be determined by using the VIP inquiry process.
**************************************************************************************************************
08/11/2023 _____________________________________________________________________ New Safety Recall Advanced Communication – 84A FCA US LLC (FCA US) has announced a safety recall on certain 2023 Model Year (JL) Jeep Wrangler vehicles equipped with a 33-inch diameter tire. REASON FOR THIS SAFETY RECALL The spare tire carrier on some of the above vehicles may have been built with an incorrect Center High Mount Stop Lamp (CHMSL) bracket assembly. A CHMSL that is partially obstructed may not have adequate conspicuity to other drivers to indicate the intention to slow or stop, which can cause a crash without prior warning. Federal Motor Vehicle Safety Standard (FMVSS) No. 571.108 S6.1.3.1 requires that “Each lamp…must be securely mounted…and in a location where it complies with all applicable photometric requirements in S7.9.13 Photometry. Each high-mounted stop lamp must be designed to conform to the photometry requirements of Table XV…”. Subject vehicles do not meet these photometry requirements. SERVICE ACTION FCA US will conduct a voluntary safety recall on all affected vehicles to replace the spare tire carrier assembly. The remedy for this condition is not currently available. Dealers will be notified of the launch of this safety recall by way of established communication methods. This recall is estimated to launch in 3rd Quarter of 2023 We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries regarding involved vehicles. Customer Services Field Operations FCA US LLC
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.