NUMBER: 08-023-15 REV. A
DATE: May 27, 2015
THIS BULLETIN SUPERSEDES SERVICE BULLETIN 08-023-15, DATED MARCH 11, 2015, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE ADDITION OF 2016 (FB) FIAT 500X.
Stored Diagnostic Trouble Codes (DTCs) Found During New Vehicle Preparation
|2015||(BU)||Jeep Renegade (North America Markets Only)|
|**2016||(FB)||Fiat 500X (North America Markets Only)**|
NOTE: This bulletin applies to vehicles built for the North American Free Trade Agreement (NAFTA) Markets only.
DTCs are stored when the dealer technician changes the vehicle from Logistics Mode to Customer Mode. No action is required by the technician at this time.
NOTE: Stored DTCs will auto erase after 40 plus ignition key cycles.
NOTE: Any time the vehicle changes from Logistics Mode to Customer Mode DTCs are stored.
Stored DTCs will vary based on vehicle configuration, below is a list a Stored DTCs that may be found on a typical vehicle.
|AMP||U2007-64||Message STATUS_TELEMATIC.AUDIOSts_Telematic (from Entertainment Telematic Module) – Signal plausibility failure|
|AMP||U2001-87||Message CTRL_AMP (from Entertainment Telematic|
|AMP||U2021-87||Message STATUS_TELEMATIC. Current Source (3) (from Entertainment Telematic Module) – Missing message|
|AMP||U1736-87||Entertainment Telematic Module (ETM / LTM) – Missing message|
|AMP||U2018-64||ETM Current Source 1 = SNA|
|AMP||U2019-64||ETM Current Source 2 = SNA|
|BCM||U1736-87||LTM (LowLevel Telematic Module) / ETM (Entertainment Telematic Module) – Missing message|
|BCM||U0254-87||Lost Communication With Remote Start Module – Missing message|
|ETM||B1562-13||GPS antenna open|
|ETM||B2206-00||Current VIN Missing / Mismatch|
|ETM||U1193-87||Loss of communication with LBSS|
|ETM||U1194-87||Loss of communication with RBSS|
|ETM||U0422-86||Invalid data received from BCM|
|RFHM||U197C-83||CRC and Message Counter TRANSM2 – Value of signal protection calculation incorrect|
|RFHM||B1033-64||Operational Mode Status 1 – Signal plausibility failure|
DATE: March 11, 2015
- 👍【2022 NEW INTELLIGENT SCANNER】Upgraded from LAUNCH X431 PRO3, X-431 PRO5 bidirectional scan tool ranks among the top professional diagnostic scanners in 2022 with the loaded functionalities: Feature-rich SmartBox 3.0, J2534 ECU Programming, Online ECU Coding & Adaptations, Intelligent AutoVIN & AutoScan, 50+ Hot Services, Bi-directional control, VAG Guided Function, FCA AutoAuth Access, etc. The software is updated to 2021 and covers the most recent car makes & models in 2022.
- 【J2534 REPROGRAMMING WITH SMARTBOX 3.0】Worth more than $1000, LAUNCH X431 Smartbox 3.0 is compatible with J2534/DOIP/CANFD protocols, giving you power to access data to more vehicles (Toyota, Honda, Volvo, VW, GM, Chrysler, Benz, Jaguar, Land Rover, GE, and BMW E/F/G Chassis) models and do OEM J2534 programming downloads (please reach to us for more details). It also serves as a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical connection.
- 【ALL-IN-ONE DIAGNOSTIC SOLUTION】Packing all capabilities that a mechanic would ever need, this scan tool X431 PRO 5 features: ➤ Online Coding: match, relearn, and code the newly installed ECU module and get everything back on track for VW, Audi, BMW, Porsche, etc.; ➤ Support DC9-36V for commercial vehicle’s diagnostics (*HD manufacture software and non-16pin adaptors are optional); ➤ FCA AutoAuth Access: bypass SGM for diagnostics, active test, calibrations, etc. for FCA group vehicles.
- 【INTELLIGENT CAR DIAGNOSTIC SCANNER】Excellent bi-directional controls, smart and advanced services are developed for mechanics looking for a diagnostic scanner with ultra-convenient: ➤ Active Tests: directly sent instructions for easy troubleshooting; ➤ Intelligent diagnostics involving AutoScan and AutoVIN (2006+) to walk you through the diagnostic produce; ➤ VAG Guided Function allows you to skip the Security Access Code & Channel Number to perform matching, calibrations for VAG cars.
- 【50+ HOT SERVICES, ALL SYSTEM DIAGNOSTICS】LAUNCH X431 PRO 5 helps you perform a variety of crucial advanced service functions to make servicing a breeze in the workshop, which include multiple resets for Oil, SAS, EPB, TPMS, Immobilizer, BMS, DPF, AFS Headlamp, Gearbox, Suspension, Sunroof plus many more. Also, this scan tool LAUNCH X431 PRO5 can run diagnostics across all vehicle systems and electronics for a wide range of 100+ popular vehicle manufacturers around the globe.
- 🟠【MS906PRO TS with 5G Process Speed】Why MS906PRO TS scan tool surpass MS906TS? ✅Integrating all the strengths of MaxiSys MS906TS, MS906PRO TS has made a complete upgrading: 8-core processor, Android7.0 OS, and 4+128GB super memory running 4x faster & smoother diagnostics; Timely software updating & 11600mAh battery withstand long-lasting use. ✅Same functions as MS908/MK908 automotive scanner, meets needs of diagnostics and economic cost for big-scale repair garages.
- 🟠【MS906PRO TS All-in-One TPMS Intelligence Expert】Gathering all advantages of Autel TPMS tools TS501/TS508/TS601/TS608/MaxiSys MS906TS, MS906PRO TS bi-directional diagnostic scan tool packs all capabilities that tire-related technicians would ever need: TPMS Diagnostics, TPMS Reset, TPMS Retrofit, All-known Sensors Activation, Sensor Data Check, 4 Methods for Autel Sensor Programming, and 3 Options for Sensor Relearn.
- 🟠【ECU Coding Enhances Vehicle Performance】Upgraded version of Autel MK808BT /MP808 /MP808K /MS906BT, the automotive scan tool MaxiSys MS906PRO TS is a local-smith level ECU Coding tool that functions to recoding changed ECUs, replacing ECU modules, unfolding hidden functions, and improving vehicle performance. What’s more, it features VAG guided functions, Online Coding for Porsche, etc, that makes diagnostics easier and smarter.
- 🟠【36+ Service, More than Sap-on Scanners】Same functions as OEM car diagnostic scanners, this Autel scanner MaxiSys MS906PRO TS outperforms wider & deeper than them and improves 200% efficiency for technicians and large repair shops. Come with 36+ hot reset functions, the MS906PRO TS OBD2 scanner bluetooth does better in 99% of vehicles worldwide, including Oil Reset, Injector Coding, EPB Reset, ABS Bleeding, Throttle Matching, TPMS Reset, Seat Calibration, and more.
- 🟠【Active Test On All Systems】Never wastes your every single second, MS906PRO TS car code reader saves you time to win more businesses. Tests on thousands of cars, MS906PRO TS automotive scanner operates a stable & accurate active test to all on-board systems like fuel pump, valve, wiper, window, door, sunroof, headlamps, to pinpoint any problems within 3 minutes. And this OBD2 scanner also performs OE-level diagnostics across all vehicle systems for 100+ brands.
- ✅【Multi-Functions】- Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- ✅【Wide Capability】- Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- ✅【LCD Display】- Designed with a clear display LCD screen (128 x 64 pixels) - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- ✅【Compact Design】- Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ✅【ABS / Airbag codes NOT Supported】- It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Vehicle CEL Doctor】The NT301 obd2 scanner enables you to read DTCs, locate bad O2 sensors, access to emissions readiness status, turn off CEL(check engine light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle.
- 【Accuracy & Streams】Live data graphing and logging. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend.
- 【Worthy to Own】Recommended by Mechanic Scotty Kilmer on Youtube. Codes analysis and Printer compatible. Unique PATENTED design, 2.8" color screen, Free Lifetime Update and 1-year seller assurance with EXCLUSIVE tech and service team.
- 【Smog Check Helper】Read/Erase and I/M readiness hotkeys make it easy to use the car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for confident emissions test.
- 【Home Necessity】Open to global customers. No battery required, NT301 obd scanner is charged directly from the 16pin DLC in your vehicle. It is recommended as a necessity in your toolbox and one of the best gifts for Home and Autoshop Mechanics.
- Classic design, fast scan and erase trouble codes, even a beginner can use it read the error code, find out what the problem is and perhaps fix it. Save money and time. It can not read and erase ABS, SRS(Airbag), and other systems fault codes.
- Works on MOST 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese.
- Easily determines the cause of the check engine light. I/M monitor readiness test, turn off the MIL (check engine light) as well as view freeze frame data. Read hard (memory) / pending (intermittent) and historic codes and show definitions.
- The AD310 scanner is well built with a large LCD display (128 x 64 pixel) that has white backlight and contrast adjustment, indicates test results directly. No need any Batteries or Charger, gets the power directly from the OBDII Data Link Connector in your vehicle.
- It's equipped with a 2. 5 feet long cable and made of a very thick flexible insulator. There are 4 buttons on AD310. The Up and Down button for scrolling the menu, the Enter and Exit button allow for navigation back and entering menu.
- 🚩🚩【2022 New Version👍Same Functions as Autel MP808K/MS906】 : Autel MP808 2021 new added more OE-Level Functions👉Guided Functions 👉Component Matching👉Online Account Login Service 👉Power Balance 👉Flash Hidden Functions👉Actuator Test👉Tons of Actuator Test👉Key Programming ( All the function above is car-specific）.
- 🚩🚩【Bi-directional Control + ALL System Diagnosis】Autel MP808 automotive scanner can actuate solenoids and actuators for active testing, send commands to many systems/components to test their working status, without using the vehicle controls. and access to ALL vehicle systems and subsystems, covers Body, Chassis, Powertrain, Fuel system, Light system,and etc,.
- 🚩🚩【Best Hardware & 30+ Growing Reset Functions】✅Android 4.4.4 System✅ 7 inch touchscreen✅32GB SD Card(extent to 64GB)✅front &rear cameras✅Auto VIN✅One-Click Update,NO IP Limited! ✅generate/print/share Vehicle Health Report✅Remote Diagnosis✅Data Stream record and playback ✅Maintenance Help.✅ECU Coding,Key programming,ABS Bleed,SAS/TPMS/DPF/Reset and etc,.functions are all-round, reliable, powerful, running super fast, time-saving and cost-effective for a professional mechanics.
- 🚩🚩【Wider Vehicle Coverage for Repairing Shops & Diyers】Autel MP808 automotive scanner reads & erases codes, view live data, retrieve ECU version information.Full range car models and full car system diagnose make it a professional automotive diagnostic tool. ✅Being the economical version of Autel MP808K which equipped with full connectors, MP808 gives you cost-effective alternative. If you need some connectors, you can contact our after-sales mailbox separately.
- 🚩🚩【Mechanics with 50 years of experience Highly Recommended】Autel MP808 diagnostic tool automatically identify vehicle information and complete rapid diagnosis and Quick ALL-MODULE Health Report Generation, greatly increasing the productivity. 👉 ( Click $40 Coupon to get Autel MP808, Contact us to get extra Gift) 👍 Autel official authorized MP808 provide 5-year warranty, 60-days return & replacement, and 24/7 thoughtful support.
- Please contact us (7/24 service) before purchasing to confirm that Thinkdiag2 can perform this function on your vehicle. This OBD2 scanner the only diagnostic scanner in this price range that supports the CAN-FD protocol that is compatible with the latest GM vehicles manufactured after 2020, which can run faster than other products to greatly enhance the user experience. Unlock the protected FCA vehicle SGW module on Chrysler, Dodge, Jeep, Alfa Romeo, and Fiat vehicles manufactured after 2019.
- ThinkDiag2 is an OE-Level Bluetooth diagnostic tool that supports full system diagnosis. It supports read/clear codes, datastream, actuation tests, special functions, coding, adaptation, and read control module information for all systems, such as ECM, ABS, SRS, TCM, EPB, TPMS, SAS, A/C, BMS, etc. The specific functions that can be performed may vary by car model. Free software updates and usage are available for 1 year, paid subscription is required to use the model software after expiration.
- A Bi-directional control diagnostic tool that supports actuation tests, drives solenoids and actuators for active testing, sending commands to the system/component to test its operating status without using the vehicle controls, making it easy to operate and saving a lot of time to identify the cause of the fault. In addition, it supports ECU CODING which allows you to match replacement components to the ECU. It also can activate the hidden functions for some BMW, VW, AUDI, and BENZ models.
- Thinkdiag2 OBDII code scanner is designed for individual car owners, DIYers, and small repair shops, which has a separate menu of 15 common special functions, such as Oil reset, EPB reset, DPF regeneration, SAS calibration, ABS bleeding, injector code, IMMO matching, TPMS reset, etc. Enter from the all-system diagnostic menu to unlock more system special functions, and effectively handle the reset and relearn of most cars. Note: The Maintenance functions that each car can do may be different.
- The 2022 newest diagnostic scanner has an Auto-VIN function, it can help car owner/repair stores automatically and quickly identify the year of manufacture, model, and VIN of most models, then enter the vehicle diagnostic menu. Then you can click 'Health Report' for a complete vehicle system scan, which will automatically generate a detailed vehicle health report after diagnosis. Reports and diagnostic records can be viewed in the REPORT and HISTORY menu, and reports can be shared and printed.
- 🧡Warm Notice:✅1. If you think you receive an used or defective product, this may be because Amazon re-list the product returned by the previous customer. Please don't worry! You can send us the picture of the item you received, and then we will re-ship a new product to you. ✅2. The newest version doesn't come with a yellow connector, because we have upgrade the package list from November 2021. ✅3. If you have any issues, please feel free to contact us via [email protected] outlook. com.
- 🥇【2022 NEW ELITE SCAN TOOL + 26 RESET SERVICES】: LAUNCH CRP909X scan tool is the Upgrade Ver. of LAUNCH Creader VII+/CRP123X/CRP129X/LAUNCH CRP TOUCH PRO ELITE. It provides 26 competitive RESET services to make your repair/maintenance more user friendly. Details are as follows: Oil Reset/ SAS Reset/ EPB Reset/ BMS Reset/ DPF Regeneration/ ABS Bleeding / IMMO /Sunroof Reset/Suspension Reset/ Gearbox Reset/ AFS Headlamp Reset/ Injector Coding/Gear Learning/TPMS Reset/Throttle Adaptation.
- 👍【Newly Added 11 Reset Services from November 2021】The details are AC System Relearn, AdBlue Reset, A/F Reset, Coolant Bleed, Language Change, NOx Sensor Reset, Seats Calibration, Stop/Start Reset, Transport Mode, Tyre Reset, Windows Calibration. 🚩NOTE: If you buy CRP909X now, you may need to update it to get these functions. The update process is easy. After connecting the scanner to WIFI, click the "upgrade" on the menu, and then choose the software you want to update this scanner.
- 🚗【OE-LEVEL FULL SYSTEM AS LAUNCH X431 + SMART AUTO VIN SCAN】 LAUNCH OBD2 SCANNER CRP909X can read ECU VERSION INFORMATION, read/clear DTCs, read LIVE DATA (text & graphic) for all vehicle systems (ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, TPMS System etc.). With AUTO VIN SCAN, this launch scan tool can obtain the VIN info of the identified vehicle and scan the systems automatically, once the launch scanner and the car are properly connected.
- 🚖【20000+ COMPATIBLE VEHICLES & SMART DIAGNOSTIC REPORT】 This escaner automotriz professional launch crp909x is compatible with over 57 different vehicle brands and 20000+ cars worldwide which are compatible with OBDII, EOBD and JOBD protocols and also supports cars made in 2018/2019/2020. LAUNCH scanner can automatically generates a car diagnostic health report, you can store the data to graph, record, and playback your vehicle’s parameters, and print them by email for further analysis.
- [J2534 COMPLIANT] - The Mastertech II is a J2534-1 and J2534-2 compliant VCI for OEM reprogramming and diagnostic applications
- [FULLY VALIDATED BY TOP 6 OEMS] - Mastertech II has been fully validated to operate with the top 6 OEM reprogramming applications: GM, Ford, FCA, Nissan/Infinity, Honda/Acura, and Toyota/Lexus
- [PRE-CONFIGURED] - The pre-configured wireless and wired connections make it quick and easy to connect to a vehicle from your PC (requires PC compliant with OE specifications and software)
- [RIGHT TO REPAIR] - Supports 'Right to Repair' (R2R) initiatives
- [COMPREHENSIVE KIT] - Kit includes: VCI, WiFi adapters (wireless PC to VCI), J1962 Cable (connect to vehicle), USB cable (connect to PC for firmware updates and setup), and Quick Start Guide
- MORE CODES: To understand the problem with your vehicle you need the complete picture. With an up-to-date modern scan tool, you scan deeper to read, understand, and clear more codes. Access information normally only available to professional mechanics on their most expensive scan tools.
- REAL FIXES: Get unlimited vehicle specific Repair Reports, generated from our database of millions of fixes verified by Professional Automotive Technicians. Save time and money.
- NO CORDS: All the capabilities of an expensive scan tool (extended vehicle coverage, live data, etc.) combined with the power and convenience of your smartphone or tablet. No cords, no subscriptions, and regular free updates.
- LIVE DATA: View live data and monitor your vehicle’s health in real time. Configure the data sources, customize your view with various displays and colours, and log and export live data as a file.
- BlueDriver is proudly American owned and is the OBD2 Diagnostic Scan Tool trusted by professional mechanics and developed and supported by Professional Engineers.
Last update on 2022-07-05 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.