DATE: March 27, 2015
This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
THE wiTECH SOFTWARE LEVEL MUST BE AT 15.03 OR HIGHER TO PERFORM THIS PROCEDURE.
Auto Headlamp Enhancements
This bulletin involves checking Tunnel Detection values and performing a vehicle reconfiguration if needed.
|2014-2015||(DS)||Ram 1500 Pickup|
|2014-2015||(DJ)||Ram 2500 Pickup|
|2014-2015||(D2)||Ram 3500 Pickup|
|2014-2015||(DD)||Ram 3500 Cab Chassis|
|2014-2015||(DP)||Ram 4500/5500 Cab Chassis|
NOTE: This bulletin applies to vehicles built on or before January 20, 2015 (MDH 0120XX) equipped with Rain Sensitive Windshield Wiper (Sales Codes JHC).
The customer may experience when exiting a dark parking structure or dark tunnel the auto headlamps may not turn off. The customer may also experience when driving on an over cast day the auto headlamps may cycle on and off frequently.
Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in TechCONNECT, verify if any Diagnostic Trouble Codes (DTCs) are set. If DTCs are present, record the issues on the repair order and repair as necessary before proceeding further with this bulletin.
If the customer describes the symptom/condition listed above, perform the Repair Procedure.
- Using wiTECH check to see if “Tunnel Detection” is turned off.
- On front page of wiTECH, select the BCM.
- Select ECU Details.
- Select Configuration tab.
- Scroll down the list and find Tunnel Detection.
- Is the Tunnel Detection value set to “Not set”?
- Yes >>> This bulletin doesn’t pertain, normal diagnostics needs to be performed.
- No >>> Proceed to Step #3.
- Reconfigure the vehicle. This routine is available under the ‘Diagnostic Procedures’ tab found on the home, ‘Vehicle View’, page of wiTECH, select Restore Vehicle Configuration.
- Using wiTECH clear any DTCs which may have been set during the reconfiguration.
Reimbursable within the provisions of the warranty.
|Labor Operation No:||Description||Skill Category||Amount|
|18-19-02-9K||Module, Body Control (BCM) Reconfiguration Vehicle (0 – Introduction)||6 – Electrical and Body Systems||0.2 Hrs.|
The dealer must choose which failure code to use. If the customer came in with an issue and the dealer found updated software to correct that issue, use failure code CC, for all other use failure code RF.
- CC – Customer Concern (Ex. Customer comes in with a concern and updated (flash) software is found pertaining to the concern).
- RF – Routine Flash (Ex. Customer comes in with no concern but updated (flash) software is found in VIP, wiTECH or wiADVISOR).
DATE: March 27, 2015
Chrysler Recommended J2534 Devices
|J2534 Device||Firmware Version|
|CTC Vehicle Box *||1.9|
|Blue Streak -2534 Global Programmer||2.10|
|Actia I+ME Passthru||2.07|
* Chrysler recommends the CTC Vehicle Box Device for Chrysler SCI ECU reprogramming. SCI reprogramming is used on most PCMs and TCMs prior to the introduction of CAN bus vehicles which began in 2004 (Durango).
Compatible J2534 Devices
Click on the link below to:
Download J2534 Application
(Install the wiTECH 2.0 J2534 Application on your computer)
Download the Setup Utility
(Configure your microPod/MDP device)
Launch wiTECH 2.0
(Once subscription and users are assigned to a tool please follow this link to access wiTECH)
- 👍【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘 !
- 👍Fully compatible with both SAE J2534-1 and J2534-2 reprogramming standards and performs standard Pass Thru J2534 functionality. To check compatibility, please contact🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- 👍Compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- 👍Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable.
- 👍Attention: 1. After you ordered and received the J2534, please send us both of the S/N(12 digits, at the back of the device) of the J2534 and your MK908(P) /MS908S (Pro)/ Maxisys Elite to us to bind the two device together. 2. The functions are NOT universally compatible. Please send VIN number to 🚘auteldirect @ outlook . com🚘 to check compatibility before your order.
- 【High-End Diagnostic Tool for ECU Pro-gramming & Coding:14 Brands】LAUNCH X431 PAD V comes with J2534 protocols,which empowers you to program the blank ECUs,match the components,re-flash the second-hand ECUs,etc.you can perform OE-level diagnosis and pro-gramming for more accurate diagnosis and efficient car repair jobs to win more business!
- 【Online Functions +Flash Hidden Features】this diagnostic tool helps you pass-thru the gateway to access the data for coding.(for 2017 and later Chrysler,Dodge,Jeep,Alfa Romeo and Fiat).Guided Function (for V.A.G) ,step by step to guid you to diagnosis.Make full use of hidden features or disable car’s annoying functions.Offline Coding.Modification for BMW 👍it is designed for any professional mechanics and independent repair shops.save time and effort on repairs.
- 【Topology Map & All System Diagnosis for Deep Inspection】X431 PAD V auto scan tool new-added topology module mapping,it is easy to view the communication structure between modules.you can directly access all system to perform functions,view live data in graph.
- 【50+ Maintence Functions & Full Bi-Directional Control】LAUNCH X431 PAD V car diagnostic tool supports 50+ reset service,like key IMMO,abs bleeding,GEARBOX,Oil Reset,Injector coding, Gear Reset, SAS Reset, TPMS Reset, DPF Reset, BMS Reset, ETS Reset, AFS Reset, EGR Adaptation,etc.it also can perform bi-directional control on all systems,like ABS,fuel pumps,windows,doors,etc.
- 【99% Coverage & Support J2534/DoIP/CAN FD/RP1210 Diagnostic Protocols】LAUNCH X431 PAD V supports API standard Communication Interface,with the VCMI Vehicle Communication Measurement Interface.support D-PDU/J2534/RP1210 Protocols👍LAUNCH X431 PAD V scan tool support PEV ( pure electric vehicle ).👍Heavy Duty Software (need extra buy)diagnose gasoline vehicles & 24V Diesel Trucks/buses/trailers/excavators/construction machinery/pick-up/etc.
- 👍【2022 Newest Updates: AutoAuth Access & Cloud Service】Two long-awaited features for old customers!✅(Since June 2022)Autel original MS908S Pro scanner supports "AutoAuth" gateway access on 2018 and newer Fiat Chrysler vehicles, such as Chrysler, Dodge, Jeep, etc, still growing. ✅(Support Cloud Report Management, you can upload diagnostic reports to Autel Cloud and share reports with your customers through QR Code/email/text message easily, and they can view the reports anytime.
- 👍【A Must for Garage and Workshop】If you need to program Benz/BMW, Autel MS908S Pro scanner is definitely an expert, this is what it does best! MS908S Pro is a mature product that has been tested and approved by workshops across US. Besides ECU Programming for Benz/BWM, MS908S Pro can perform ECU Coding, Active Tests, 36+ Services, All System Diagnostic, FCA “AutoAuth” Access, etc.🚦📢👉 Note: MS908S Pro is for North & South America only and supports English only.
- 👍【One-Stop ECU Programming for BENZ/ BMW】Coming with J2534 ECU programming device, Autel MS908S Pro is competent for ECU programming and ECU coding/ adaption. It can program blank ECU, adapt existed ECU, match components, reflash second-hand ECU, unlock hidden functions, etc. In order to reduce operational burden, MaxiSys MS908S Pro provides one-stop operation to meet the needs of different experienced technicians, no worries about missing some steps and causing failure.
- 👍【Advanced ECU Coding, Customize your Car】Automotive diagnostic scan tool MS908S Pro features Advanced ECU Coding, so you can use it to customize your car as needed by disabling some unneeded OEM settings (like auto start-stop, chimes, etc), or activating the hidden features pre-programmed to car computer to get high-end functions (like US-style daytime light, auto door look at a particular speed, etc).👉Compatible with BWM, VW, Audi, Skoda, etc.
- 👍【OE-level Diagnostic Capability & Guided Function】Auto diagnostic tool MS908S Pro, with J2354 device for BT communication up to 210ft/70m working range, can access all available vehicle modules such as PCM, ECM, TCM, BCM, SCCM, etc, to read codes, clear codes, view live data, perform active tests, etc. Guided functions provides step by step specific guidances to complete some complex service operations. 👉Compatible with VW, Audi, Skoda, Seat, etc.
- 🚗【Same as MaxiSys Elite, No IP Restriction】: Covering 99% of the vehicle models from 1996 to 2022. Based on the MS908S Pro, Autel MK908P diagnostic scan tool enjoys superior hardware configuration, serves 13 languages with no IP restrictions (MS908S Pro ONLY supports English) Lifetime after-sales service and professional technology support have no difference from offline retail version. Feel free to message us with any problems. Present battery tester as a gift (worth 49 bucks).
- 🚗【ECU Programming & Coding, Guru for Local Smith】: To broaden vehicle business and increase your revenue, the Autel scanner MK908P assigns advanced ECU programming and coding to 1) customize your car, 2) unfold the hidden features, 3) disable the annoying functions to improve car performance, but also reprogram the adaptive data to certain components after repairs or replacements. The specific operation varies by model.
- 🚗【36+ Service Functions, Best for Repair Shops】: Designed for large-scale garages and equipped with 36+ repair functions, Autel MK908P covers 99% of cars in the market. This make it the most valuable scanner to serve as many cars as possible in your shop. The 36+ functions include Oil Reset, TPMS, ABS Bleeding, EPB, SAS, Injector Coding, BMS, Suspension, etc. Please be noted MK908P programming tool will always keep pace with newer functions and continuous upgrading, never out of date.
- 🚗【High-end Online Functions, OE-level Auto Scanner】: MK908P diagnostic tool explores all the systems and scans hidden DTCs. For quickly locating the fault, active test sends commands directly to vehicle modules to perform specific tests on windows, sunroofs, wipers, relays, injectors, and actuators, etc. Newly launched online functions obtain the online data from the server like online account login service for VW, Audi, Skoda; online configuration for Renault; online coding for Porsche; etc.
- 🚗【Top-end Configuration, Ultra-Fast Speed】: Same functions with MaxiSys Elite, but configured with 2G+64G memory Hexa-core processor, 10.1” screen, and 15000mAh battery to accelerate diagnostics and repair. 2022 MK908P diagnostic scanner offers more to expand the market and raise income for example power balance for Ford, Chrysler, GM; personalization for VW, Audi, Toyota; guided functions for VW, Audi, Skoda; etc.
- 🚩🚩【2 YEARS FREE UPDATE, SAVING $1295 than Maxisys Elite II】Autel Maxisys Elite, more advanced than MS908S Pro & MK908P, but costs much less due to its extended 2 YEARS subscription-free updates; also is almost the same function-wise as Autel scanner Ultra yet more budget-friendly: J2534 ECU Programming & Coding, 10,000+ Car Models Coverage (include Luxury cars), 38+ Hot Functions, Active Tests, Autel Cloud, Repair Data, Remote Expert … aimed at professionals with tons of pro features to match.
- 🚩🚩【J2534 ECU PROGRAMMING, SAME AS MS909/MS919/Ultra】As one of the few Autel scan tools that are designed with a fully-compliant SAE J2534-1/-2 MaxiFlash box, this diagnostic scanner supports Online ECU Programming for all-chassis Benz/BMW users to upgrade the existing software/firmware (till July 2019); ECU Programming for any vehicle with J2534 protocol (manufacturer’s software required); and Online Coding for VW/Audi, Seat, Porsche, Renault, etc. It also allows Online SCN for Benz.
- 🚩🚩【38+ HOT FUNCTIONS, Advanced than MS908SP/MK908P】This professional OBD2 scanner is loaded with 38+ service functions being a one-stop solution to meet ALL your needs for various scheduled repairs or maintenance. It includes Oil, SAS, EPB, TPMS Reset, Injector Coding, SAS, Bleeding, DPF, Battery, Throttle & Anti-theft Matching plus many more that are super beneficial and can be updated constantly with more functions and wider car coverage. *Menus vary by vehicle specifics.
- 🚩🚩【WIDE COMPATIBILITY RATES】Covering 80+ car brands, 150+ makes, 10000+ models, this Autel diagnostic tool’s vehicle coverage will continue to grow with simple internet-ready updates accessible to you via WiFi, and we highly recommend its registration upon the purchase to get 2 YEARS of subscription-free upgrade. More, thanks to the MaxiFix platform with cloud-based Remote Expert, you can ask for help from peers and experienced experts online to fix complex issues even programming or coding.
- 🚩🚩【SUPERIOR HARDWARE, UPGRATED Ver. of MK908P/MS908S Pro】 This 2022 version Autel scanner Elite boasts a 9.7” retina display (2048*1536) as an iPad; quad-core 1.8GHz NVIDIA’s Tegra running 3X faster than competitors under its Android KitKat 4.4; and a set of solid hardware including USB3.0/2.4 & 5GHz Dual WLAN/BT/HDMI/Ethernet Connection; 15400mAh Battery; 8M Rear/2M Front Camera to maximize diagnostic convenience; along with one-stop multitasking to keep intertwined procedures well organized.
- 🔥[2022 New Feature - AutoAuth Access] NOW Autel scanner MK908P has full access to protected FCA vehicles! (👉 Updating your device to get this new feature) With an authenticated AutoAuth account, you can bypass SGW module in 2017 & later FCA cars (Chrysler, Dodge, Jeep, Alfa Romeo, Fiat, etc.) and perform diagnostics: clear codes, bi-directional functions, active tests, actuation & relearns, even more. *Reach us for details.
- 🎉【ECU Programming +Same Functions as Maxisys Elite】Coming with J2534 ECU reprogramming device, Autel MK908P is competent for ECU programming specific BENZ/ BMW. EXACTLY the same functions as Autel MaxiSys Elite, making itself the most cost-effective high-end diagnostic scanner in Autel product line. Also upgraded of MS908S Pro, Autel MK908P auto scanner enjoys superior configuration, serves 13 languages with no IP restrictions (MS908S Pro ONLY supports English).
- 🎉【Online Coding + Active Test】There is online coding for VW, Audi, Porsche, Benz, BMW. Online configuration for Renault is unique among diagnostic industries. Besides, Autel MK908P features Bi-Directional Control (Active Test) to request information or command an actuator to perform specific tests, like cycling the a/c clutch on and off, perform an evaporative emissions leak test and more tests to solve the specific repairing work.
- 🎉【All-system Diagnose + 36 Service Functions】Provided with full-systems diagnosis (ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System, etc.). MaxiSys Pro MK908P also offers another 36+ service functions to help your repairing work faster, easier, and more professional. These service functions include immo keys/throttle/injecor coding/trans adaption/suspension/tyre retrofit/DPF/brake bleed/oil reset and more.
- 🎉【Common + Luxury Car Makes Coverage】MK908P is designed for repairing store, thus it enjoys extensive coverage for almost all car makes. Firstly, it has a wide range of compatibility for over 80 brands in the US, Europe and Asia. Besides, you have access to the newest model with fast-release software update. Moreover, There are basic diagnostic functions and most service / special functions compatible with Lamborghini, Ferrari, Aston Martin and Maserati etc.
- 👍【Advanced Diagnostic Scanner for ECU Programming】 : Autel MK908P has been designed to perform some of the most complicated engine diagnostics and reprogramming in BMW and Mercedes Benz. With the jbox/J2534 VCI or BMW Ethernet Cable, you can edit the cars performance data, like adjusting RPM, fuel injection, etc. A professional car diagnostics scanner to save time/effort on repairs. Form some of the most complicated engine diagnostics and reprogramming in BMW and Mercedes Benz.
- 👍【2022 Newest, 36+ Special Functions 】As 2022 newest professional diagnostic tool, Autel MaxiSys MS908S Pro +MV108 auto scanner can perform 30+ most useful service & special functions like Oil Reset, SAS Calibration, SRS, EPB, DPF Regeneration, Battery Registration, ABS bleed, Injector Coding, Key Fob Coding(add new keys) etc. NOTE: All service & Special functions are NOT universally compatible.
- 👍【Bi-Directional Control & Broad Vehicle Coverage】 Autel MK908P is an advanced bi-directional scan tool that can access and scan all available systems on 80+ makes and models to perform OE level diagnostics that are previously available to dealership tools only to read and clear codes, view live data, perform active tests/component tests to control various components/parts like fuel pump, cylinder, valves, abs motor, wipers, car windows, doors, sunroofs to test its functionality.
- 👍【Easy to Operate】 : The MK908P hardware can equal to a best rank android tablet in the market and that made the whole diagnostic procedure more quickly and precisely. Maxisys platform, cloud-based Maxisys provide a large amount of data about the diagnosis and repair advices, that’s really helpful, whenever you encounter problems, you can find solutions from it.
- 👍【Compatible with Some Add-ons】 : Combination with Oscilloscope Maxi Scope MP408 and Digital Inspection Cameras MV108, the power of this tool is amazing and the detail you receive about every component of the vehicle makes pinpointing a problem painless. Affordable combination of MS908P and TS601 supports TPMS programming, which turns into a powerful diagnostic tool.
- 🔝【INTELLIGENT DIAGNOSTICS ONLY TAP UPDATE ICON TO V2.42 VER., VALUE $1500+】Just upgrade software to V2.42 ver, intelligent diagnostics will in your hand. Same as MS Ultra, Autel scanner MaxiSys Elite II has intelligent diagnostics feature to simply diagnosis process. After scan vehicle ECU, Autel Elite II will array error codes in priority, instruct the technician get accurate diagnosis referring to TSB, Repair Assist, Repair Tips, Relevant Cases. Note: it doesn't support topology map.
- 🥇【2022 NEWEST VERSION, 𝐒𝐀𝐕𝐄 $380 THAN ELITE】Same as MS909, Upgrade of MS908S PRO/ MK908P/ MK908/ MS908/ MaxiSys Elite, Autel Elite II with amazing highlight features: intelligent diagnostics(same as MS Ultra), ECU Programming & Online Coding & Offline Adaptation, 38+ Services, Active Test, etc. New added special functions as follows: McLaren/Tesla diagnosis, Oscilloscope, Battery Test(need BT506), MaxiFix Cloud Service, Autel Cloud Reports, Remote Expert, etc.
- 🥇【ECU PROGRAMMING ON BENZ&BMW + J2534(VALUE $1099)】Autel Elite II performs same ECU programming as MaxiSys Ultra MS919 MS909, which supports replace existing software/ firmware, reprogramming component control modules after replacement, solve fuel efficiency/power loss/durability issues etc. For Benz & BMW, Autel Elite II will go into ECU modules execute "Programming➞Backup-Restroration" or "Initial start up➞Control module replacement" operations to renew/upgrade latest vehicles software.
- 🥇【ECU ONLINE CODING, ECU OFFLINE ADAPTION】Autel Elite II automotive diagnostics scan tool has powerful ECU Online Coding for refreshing hidden function, forbid annoying features, customize OE-settings, match/learn/code newly replaced ECU for 99% vehicles for Suzuki, Mitsubishi, Honda, Chrysler, VW, GM, etc. ECU Offline adaptive programming is also embedded into Autel Elite II for Ford Mazda Jaguar Vaxhall Opel, etc. Please send VIN to 🚘auteldirect @ outlook . com🚘 to check compatibility.
- 📢📢【2022 NEW ADDED 10+ HIGH-END FUNCTIONS】Upgrade of Autel Elite, 2022 new version Autel MaxiSys Elite II has added more functions, such as ➊Online Parameterization, ➋VAG Guided Functions, ➌MaxiFix cloud service, ➍Component Matching, ➎Full Battery Test (need BT506), ➏WIFI Printer(Previously only available on MS909 MS919 Ultra), ➐Autel Cloud Reports to saving Storage Space speeding diagnose, ➑MV108/MV105/MP408 compatible, ➒Pre&Post Scan,➓Remote Desk, etc.
- 🥇【Same As MaxiCom MK908P, No-IP Restriction But Double Services】Compared with the online model MK908P, Autel MS908S Pro is a mature product that has been tested and approved by workshops across US/EU, and has dual after-sale support from online sellers and US/EU Autel local agents but MK908P has only seller’s support.🥇More Vehicles: Upgraded from MK908P, MS908S Pro has further developed the diagnostic function of McLaren and Tesla. 📢 Note: MS908S Pro supports English only.
- 🥇【ADVANCED ECU PROGRAMMING & ECU CODING】Autel diagnostic scanner MS908S Pro comes with J2534 ECU programming device & BMW Ethernet Cable(For F-Series Coding & Programming), which is capable of reprogram/reflash modules(ECM, TCM, BCM) on specific BMW, Benz vehicles in the Electronic Control Units (ECU), programming new Benz/BMW ECUs and fixing software-controlled drivability issues and emission issues, update the computer software on the vehicle to the latest version.
- 🥇【36+ HOT FUNCTIONS, PERFECT CHOICE FOR WORKSHOPS】Full system diagnostic scanner MS908S Pro covers over 36+ professional service functions, become the most popular diagnostic tool in repair shop and garage, such as Oil Reset, EPB Reset, SAS Calibration, DPF Regeneration, Battery Registration, Throttle Reset, ABS Bleed, Injector Coding, Key Fob Programming, Zero Point Calibration. NOTE: NOT universally compatible! Please send your VIN to AutelUS @ outlook . com to check compatibility.
- 🥇【BI-DIRECTIONAL CONTROL& OE-LEVEL All SYSTEM DIAGNOSTIC】Bi-directional control of the ECM in the Component Test enables the MS908S Pro to transmit control commands to operate the vehicle systems, check the vehicle operating conditions. Control various subsystems, parts & components and more. All system diagnostics can access all available car modules including but not limited to PCM, ECM, EPS, PDM, TPM, BCM, ABS and SCCM. Please contact us to check compatibility before order.
- 🥇【VAG GUIDED FUNCTION & FLASH HIDDEN FUNCTION】Unlike the entry-level automotive diagnostic scanner, Autel MS908S Pro provides OE-level guided function to guide you repair your vehicles step-by-step, simplifing the diagnostic process and shorten the diagnostic time. Refresh hidden functions can help you customize cars by unlocking hidden features that are programmed in the ECU but not shown on the display settings, such as Auto Park, tilting rear-view mirrors, start and stop memory, etc.
- VCX is designed on the basis of the latest automotive international standards so that it can support many professional automotive diagnostic applications
- WIFI Version VXDIAG VCX Nano compatible for TOYOTA and Lexus, support both USB connection and WIFI connection, support latest version software, Compatible with varieties protocols. can be very easy to connect various automotive bus to a PC
- OS support both WINDOWS XP and Windows 7, Software support multi-languages: Chinese, English, French, Italian, Spanish, German, ec
- You can download the vxmanager online, if you have any license problem please send us the serial number to extend the license
- One year warranty. Please contact us via order center if you have any problem with software installation
Last update on 2022-07-05 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.