Fuse Location Incorrectly Labeled – 2015 Chrysler 300

“This site contains affiliate links for which OEMDTC may be compensated”

NUMBER: 08-069-15
GROUP: Electrical
DATE: July 15, 2015

 

THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE TRANSMITTAL (RRT) 15-076. ALL APPLICABLE SOLD AND UN-SOLD RRT VIN’s HAVE BEEN LOADED. TO VERIFY THAT THIS RRT SERVICE ACTION IS APPLICABLE TO THE VEHICLE, USE VIP OR PERFORM A VIN SEARCH IN TECHCONNECT. ALL REPAIRS ARE REIMBURSABLE WITHIN THE PROVISIONS OF WARRANTY.

 

SUBJECT:

Fuse Location Incorrectly Labeled

 

OVERVIEW:

This bulletin involves installing a sticker for the correct fuse locations on the front Power Distribution Center (PDC) cover.

 

MODELS:

2015 (LX) Chrysler 300

 

NOTE: This bulletin applies to vehicles built on or after November 17, 2014 (MDH 1117XX) and on or before March 17, 2015 (MDH 0317XX).

 

SYMPTOM/CONDITION:

The fuse locations don’t match the layout according to the front PDC cover.

 

DIAGNOSIS:

If a customer’s VIN is listed in VIP or your RRT VIN list, perform the repair. For all other customers that describe the symptom/condition listed above, perform the Repair Procedure.

 

PARTS REQUIRED:

Qty. Part No. Description
1 68294252AA Fuse Location Incorrectly Labeled - 2015 Chrysler 300 | small light Power Distribution Center Label

 

REPAIR PROCEDURE:

  1. Clean the surface of the front PDC cover and remove any dirt or residue.
  2. Install the new fuse label sticker over the existing label on the inside of the front PDC cover.

 

POLICY:

Reimbursable within the provisions of the warranty.

 

TIME ALLOWANCE:

Labor Operation No: Description Skill Category Amount
23-01-05-94 Label, PDC Fuse Cover – Install (1 – Semi-Skilled) 6 – Electrical and Body Systems 0.2 Hrs.

 

FAILURE CODE:

ZZ Service Action

 


 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [33.84 KB]

 


 

Leave a Comment

1
Share to...