Flash: Poor Speaker Sound Performance – 2015 Dodge Challenger

NUMBER: 08-101-15
GROUP: Electrical
DATE: October 28, 2015

 

THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE TRANSMITTAL (RRT) 15-102. ALL APPLICABLE SOLD AND UN-SOLD RRT VIN’s HAVE BEEN LOADED. TO VERIFY THAT THIS RRT SERVICE ACTION IS APPLICABLE TO THE VEHICLE, USE VIP OR PERFORM A VIN SEARCH IN TECHCONNECT. ALL REPAIRS ARE REIMBURSABLE WITHIN THE PROVISIONS OF WARRANTY.

HELP USING THE wiTECH DIAGNOSTIC APPLICATION FOR FLASHING AN ECU IS AVAILABLE BY SELECTING “HELP” THEN “HELP CONTENTS” AT THE TOP OF THE wiTECH DIAGNOSTIC APPLICATION WINDOW.

THE wiTECH SOFTWARE IS REQUIRED TO BE AT THE LATEST RELEASE BEFORE PERFORMING THIS PROCEDURE.

 

SUBJECT:

Flash: Poor Speaker Sound Performance

 

OVERVIEW:

This bulletin involves updating the Amplifier (AMP) software.

 

MODELS:

2015 (LA) Dodge Challenger

 

NOTE: This bulletin applies to vehicles within the following markets/countries: NAFTA, LATAM, EMEA, and APAC.

NOTE: This bulletin applies to vehicles equipped with the Harman Kardon Amplifier (Sales Code RGE).

 

SYMPTOM/CONDITION:

The customer may describe one or more of the following symptoms/conditions:

Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):

  • B1474-13-Channel 5 Audio Speaker Output – Circuit Open
  • B1479-13-Channel 6 Audio Speaker Output – Circuit Open

 

DIAGNOSIS:

Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all audio systems are functioning as designed. If DTCs or symptom conditions, other than the ones listed above are present, record the issues on the repair order and repair as necessary before proceeding further with this bulletin.

If a customer’s VIN is listed in VIP or your RRT VIN list, perform the repair. For all other customers that describe a symptom/condition listed above or if the technician finds a DTC, perform the Repair Procedure.

 

REPAIR PROCEDURE:

NOTE: Install a battery charger Flash: Poor Speaker Sound Performance - 2015 Dodge Challenger » small light to ensure battery voltage does not drop below 13.2 volts. Do not allow the charging voltage to climb above 13.5 volts during the flash process.

NOTE: If this flash process is interrupted/aborted, the flash should be restarted.

  1. Reprogram the AMP with the latest available software. Detailed instructions for flashing control modules using the wiTECH Diagnostic Application are available by selecting the “HELP” tab on the upper portion of the wiTECH window, then “HELP CONTENTS.” This will open the Welcome to wiTECH Help screen where help topics can be selected.

NOTE: If the flash failed an active DTC may set, B1488-00 Cabin EQ Mismatch Performance. Reflashing the AMP will change the DTC status from active to stored and then the DTC can be cleared.

  1. Clear any DTCs that may have been set in any modules due to reprogramming. The wiTECH application will automatically present all DTCs after the flash and allows them to be cleared.
  2. Did either DTC return active after attempting to clear from the AMP?
    • YES >>> Refer to the detailed service procedures available in DealerCONNECT>TechCONNECT under: Service Info> Section 28 DTC Based Diagnostics, and all current published warranty guidelines, and labor times.
    • NO >>> This bulletin has been completed.

 

POLICY:

Reimbursable within the provisions of the warranty.

 

TIME ALLOWANCE:

Labor Operation No: Description Skill Category Amount
18-60-07-9H Module, Amplifier (AMP) – Reprogram (0 – Introduction) 6 – Electrical and Body Systems 0.2 Hrs.

 

NOTE: The expected completion time for the flash download portion of this procedure is approximately 4 minutes. Actual flash download times may be affected by vehicle connection and network capabilities.

 

FAILURE CODE:

The dealer must choose which failure code to use. If the customer came in with an issue and if the dealer finds a software update to correct that issue, use failure code CC, for all other use failure code RF.

  • If the customer’s concern matches the SYMPTOM/CONDITION identified in the Service Bulletin, failure code CC is to be used.
  • If an available flash is completed while addressing a different customer concern, failure code RF is to be used.
CC Customer Concern
RF Routine Flash

 


 

08-101-15

 


 

Chrysler J2534 Application Overview

FCA J2534 System Overview

 

DRB III Emulator

Flash Availability – J2534/Pass Thru Device

Vehicle to Diagnostic Tool Reference Chart

 

Chrysler Recommended J2534 Devices

For Chrysler recommended J2534 device, see below table.

J2534 Device Firmware Version
CTC Vehicle Box * 1.9
UCAN 2 1.0
Blue Streak -2534 Global Programmer 2.10
Actia I+ME Passthru 2.07

* Chrysler recommends the CTC Vehicle Box Device for Chrysler SCI ECU reprogramming. SCI reprogramming is used on most PCMs and TCMs prior to the introduction of CAN bus vehicles which began in 2004 (Durango).

 

Compatible J2534 Devices

Flash: Poor Speaker Sound Performance - 2015 Dodge Challenger » small light CarDAQ-Plus 2 Diagnostic Code Reader and J2534 Programming Tool
Flash: Poor Speaker Sound Performance - 2015 Dodge Challenger » small light Drew Technologies (DRWCDPLUSKIT) CarDAQ-Plus J2534 Flash Reprogramming Kit
Flash: Poor Speaker Sound Performance - 2015 Dodge Challenger » small light CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware
Flash: Poor Speaker Sound Performance - 2015 Dodge Challenger » small light VSI J2534 ECU Reprogrammer & Diagnostic Adapter
Autel MaxiFlash Elite J2534 ECU Programming Tool
Dearborn d-Bridge Adapter J2534 OBDII Engineering Tool
Flash: Poor Speaker Sound Performance - 2015 Dodge Challenger » small light Drew Tech Mongoose Chrysler Pro Oem Diagnostics And Programing Cable Chrysler

 


Click on the link below to:

Download J2534 Application

(Install the wiTECH 2.0 J2534 Application on your computer)

Download the Setup Utility

(Configure your microPod/MDP device)

Launch wiTECH 2.0

(Once subscription and users are assigned to a tool please follow this link to access wiTECH)

https://www.mopartsp.com/support

 


Chrysler J2534 Manual

wiTECH Software

www.techauthority.com

 


 

Bestseller No. 1
LAUNCH X431 PRO5 Elite,J2534 Reprogramming Tool with CAN/CAFD/DoIP/HD protocols,AutoAuth for FCA SGW OBD2 Scanner Diagnostic Tool,Bidirectional Scan Tool,ECU Coding,50+ Reset,OEM Full Systems Scanner
  • 🆚LAUNCH X431 PRO5 scan tool Upgrade all functions of X431 PRO3/X-431 Throttle III/X431-TorqueIII/X431 V+, PROS V+, PAD3. ⓵ J2534 ECU Programming &Online functions directly connect to OEM server, 50+ reset same as X-431 Throttle;⓶Bi-directional control and All system diagnostics as Snap-on scanner; ⓷ Support 150+ brands Vehicles (include CAN/CAFD/DoIP/HD protocols and AutoAuth for FCA SGW) ⓸Powered by 8-core processor(1.8GHz), Android9.0 OS, 2.4 & 5GHz WiFi connection.
  • 🚜[J2534 Reprogramming With FREE SMARTBOX 3.0】Save more than $2000, LAUNCH X431 PRO5 support J2534/DOIP/CANFD/HD protocols (Needn’t buy HDIII Module,Manufacture software and non-16pin adaptors need to be purchased separately.) Download OEM software from the manufacturer’s server to 1) program data to blank/used ECUs; 2) Reflash ECUs with data loss; 3)Upgrade ECU software version. As a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical connection.
  • 👏[50+ Reset, Continuously Updated Reset Functions]: With the LAUNCH diagnostic tool, You will never be bothered by tricky vehicle issues and keep pace with newer technology. 50 commonly reset functions ( in the quick page ) reaching into the smallest parts to root out the problems. Extra 300+ repair functions ( in-vehicle catalog) for specific models extend the capability to reset, regeneration, initiation, matching, etc. (Functions vary by models, configurations, and systems.)
  • 🌐[One stop Intelligent Diagnostic Tool]: LAUNCH X431 PRO5 obd2 scanner Bluetooth provides Repair Tips, Repair Assist, Component Measurement, TSB, Relevant Cases DTC Analysis to simplify complex diagnostic and achieve the trouble-free repair. 🤩[One Scanner For Multiple Uses]: LAUNCH diagnostic tool PRO5 collaborates with add-on modules (ADAS, Videoscope, TSGUN, X-ProG3, WiFi Pinter, Battery Tester) to expand business applications and improve diagnostic accuracy.
  • 👍【2023 New OE Level Online Functions 】Bidirectional Scan Tool offers you various high-end online functions, which enable you to access the online data to do fast & complicated vehicle repairs, e.g. 1) ECU Coding for replacing, match, relearn, recode new ECU modules; 2) Online Coding for BMW, Audi, VW, Porsche, Benz to surf OEM data; 3) VAG Guided functions ease complex issues; 4) Personalization & ADAS improving car performance and driving safety.
Bestseller No. 2
CarDAQ-Plus 3 All Makes J2534 Reprogramming Tool
  • ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
  • J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
  • TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
  • J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
  • FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
Bestseller No. 3
Autel MaxiFlash Elite VCI J2534 Pass-Thru ECU Programming Tool, Multi-Protocol PassThru Interface, Work with Autel MaxiSYS Elite II, Elite, MS908, MS908S Pro, MS908CV, MK908P, MK908 Pro II and PC
  • 🌐【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘.
  • 🌐【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
  • 🌐【High-speed Transmission Speed】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed to save more times and win more business.
  • 🌐【Multiple Devices Connected with PC】Autel MaxiFlash Elite J2534 also supports multiple device connections to the PC, which can operate diagnostic and reprogramming functions on more than one vehicle at the same time. Autel MaxiFlash Elite J2534 built-in wireless and data storage, which can update via Internet. It also ensures quickly reprogramming even the newest controllers.
  • 🌐【Extensive Compatibility】Autel MaxiFlash J2534 is compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
Bestseller No. 4
Bosch Automotive Tools MTECH2 Mastertech II J2534 VCI with Wired/Wireless Capability for OEM Reprogramming and Diagnostics on GM, Ford, FCA, Nissan/Infiniti, Honda/Acura, and Toyota/Lexus Vehicles
  • [J2534 COMPLIANT] - The Mastertech II is a J2534-1 and J2534-2 compliant VCI for OEM reprogramming and diagnostic applications
  • [FULLY VALIDATED BY TOP 6 OEMS] - Mastertech II has been fully validated to operate with the top 6 OEM reprogramming applications: GM, Ford, FCA, Nissan/Infinity, Honda/Acura, and Toyota/Lexus
  • [PRE-CONFIGURED] - The pre-configured wireless and wired connections make it quick and easy to connect to a vehicle from your PC (requires PC compliant with OE specifications and software)
  • [RIGHT TO REPAIR] - Supports 'Right to Repair' (R2R) initiatives
  • [COMPREHENSIVE KIT] - Kit includes: VCI, WiFi adapters (wireless PC to VCI), J1962 Cable (connect to vehicle), USB cable (connect to PC for firmware updates and setup), and Quick Start Guide
Bestseller No. 5
Autel MaxiSYS MS908S PRO II: 2023 J2534 ECU Programming Coding Adaption, Level-Up of MS908S Pro Elite MK908P, Same Programming As MSUltra MS919 MS909, Android 10, 4G+128G, Active Test 36+ Service, FCA
  • 🔥🔥🔥【2023 TOP-ENHANCED HARDWARES MAKING MS908S PRO II THE CHAMPION】Autel has upgraded the MS908S Pro to MS908S PRO II with 2023 Enhanced Hardwares & Newest Functions, making it FASTER and SMARTER! Upgraded of Autel MS908S Pro/ MaxiCOM MK908P/ Elite, MS908S PRO II is most wanted with level-up performance: 🏆User-friendly Android 10 🏆5X faster Octa-core processor 🏆16M Camera 🏆Enhanced 2048*1536 display 🏆4G+128GB for fast running & data storage 🏆5G&2.4 GHz Dual WiFi for efficient updatings.
  • 👍【AMAZING! 2023 NEWLY ADDED FUNCTIONS】Autel armed $300+ valued new functions to 2023 MaxiSYS MS908S PRO II with the same cost as before! Including: ✅Enhanced ECU Programming for BENZ & BMW. ✅10+ High-end Functions ✅Advanced ECU Codings ✅36+ Hot Services ✅Full Bidirectional ✅👉🏆Diagnostics for Tesla & McLaren cars 👉🏆VIN/ License SCAN 👉🏆WIFI Print 👉🏆D-PDU/RP1210 ✅ BT506/ MP408/ MV108 support ✅FCA & RENAULT SGW. ✅NO IP-Restrict, English ONLY 😎👊Autel always pursues HIGH PRODUCTS for you!
  • 👍【ONE-STOP ECU PROGRAMMING FOR BENZ/ BMW & J2534 DEVICE EXTENDED PROGRAMMING ABILITY FOR MULTI-CARS】Coming with J2534 device, Autel MS908S Pro II is competent for ECU programming/ ECU Online coding/ adaption for BENZ/ BMW cars. It can program blank ECU, adapt existed ECU, match components, reflash second-hand ECU, unlock hidden functions, etc.👍👉J2534 device ALONE can also work with P-C OE-softwares to program other cars, like Ford, GM, Honda, etc. 🚦📢👉OE-softwares need to BUY from car webs.
  • 👍【ADVANCED ECU CODING, CUSTOMIZE YOUR CARS】Automotive diagnostic scan tool MS908S Pro II features Advanced ECU Coding, so you can use it to customize your cars as needed by disabling some unneeded OEM settings (like auto start-stop, chimes, etc), or activating the hidden features pre-programmed to car computer to get high-end functions (like US-style daytime light, auto door look at a particular speed, etc).👉Compatible with BENZ, BWM, VW, Audi, Skoda, etc.
  • 👍【36+ MAINTENANCE SERVICES & VAG GUIDED FUNCTIONS】Same as Autel MSUltra/ MS919/ MS909/ Elite II, Autel MaxiSYS MS908S PRO II features 36+ services for 10,000+ vehicles, such as crankshaft relearn, Oil Reset, EPB, SAS, A/F Setting, Throttle, Suspension, Headlamp, IMMO (basic), Injector Coding, Power Balance, BMS Reset, Brake Bleed, etc. 🚦📢👉Guided Functions provides step-by-step guidances to complete complex service operations for VAG cars, like: Bently, VW, Audi, Skoda, Seat, etc.
Bestseller No. 6
Mongoose-Plus J2534 OEM Vehicle Interface Cable - Toyota / Lexus / Scion OEM Reprogramming and Diagnostics
  • Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, & VW/Audi.
  • Supports Current Toyota / Lexus / Scion Vehicles: Enables diagnostics, programming and other “dealer” functions through OEM applications
  • NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
  • Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
  • Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
Bestseller No. 7
Autel MaxiFlash Elite Vehicle Communication Interface J2534 PassThru ECU Programming Device Bluetooth Connection Internet Update Works with PC or Autel MS908S MS908 PRO MS908CV MK908 MK908P MS Elite
  • As a multi-protocol Pass-Thru vehicle interface, MaxiFlash Elite is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.
  • MaxiFlash Elite is an accessory tool for MK908P, MS908S Pro, MaxiSys Elite to program ECUs on specific for BMW and for Benz vehicles, in case you lost the J-2534 programmer.★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, Please contact us.
  • Wireless with advanced networking functions:Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable.Rugged design capable of withstanding harsh environments *Internet updateable.
  • Fully compatible with both SAE J2534-1 and J2534-2 gram standards *Performs the standard PassThru J2534 functionality *Compatible with for Toyota Techstream, for Volvo VIDA, for Honda HDS, for Jaguar-Land Rover IDS and for BMW 3G for OEM diagnostics,Fast performance ensures quickly gram even the newest controllers.
Bestseller No. 8
RAP2 OEM J2534 Remote Reprogramming Tool for GM / Ford / Chrysler / Toyota / Honda / Nissan / Hyundai / Kia / BMW / Mercedes
  • All in one kit. Everything you need to reprogram vehicles in your shop. Includes OEM software and we do the programming for you.
  • Stop sending vehicles to the dealer or calling a mobile technician. We do the programming for you.
  • Includes hardware, OEM software, voltage maintainer and access to our team of remote experts so vehicles can be reprogrammed in your shop hassle‑free.
  • Call to schedule your programming session, plug it in, and we do the rest!
  • Currently covers BMW, Chrysler, Ford, GM, Toyota, Honda, Hyundai / Kia, Mercedes and Nissan.
Bestseller No. 9
LAUNCH X431 PRO5 with Free J2534 ECU Reprogramming Tool for OEM Reprogramming and Diagnostics, 50+ Reset,OE-Level All Systems Bi-Directional Scanner for CANFD/DOIP/ Heavy Duty Truck,Key IMMO Scan Tool
  • Featured with a brand-new upgrade system, X-431 PRO5 is newly designed for All Makes, All Models, and Full system diagnosis and assists the technician to make the vehicle diagnosis and repair easier at all skill levels.
  • [J2534 ECU Reprogramming Tool, No IP Limitation]: LAUNCH X431 PRO5 scan tool Upgrade all functions of X431 V+, PROS V1.0, PAD3. With the SmartBox3.0 can download the OEM software from the manufacturer’s server for free.
  • [3 IN-1 FREE J2534 ECU Programming Device: LAUNCH X431 PRO5 support all new J2534/DOIP/CANFD protocols to access data and OE programming downloads for most Car; Support DC9-36V for HD Vehicle ( No NEED buy HD Module, SAVING $900+.)
  • [ One-stop Intelligent Tools]: Workshop level scan tool X431 PRO5 with the repair fix solutions database, Code Assist, Repair Tips,Component Measurement, TSB, Relevant Cases,DTC Analysis to simplify complex diagnostic and achieve the trouble-free repair.
  • [50+ Reset, Continuously Updated Reset Functions]: 50 resets reaching into the smallest parts to root out the problems. Extra 300+ repair functions ( in-vehicle catalog) for specific models extend the capability to regeneration, initiation, matching, etc.
Bestseller No. 10
LAUNCH X431 PRO 5 Scan Tool: 2023 J2534 Reprogramming Tool, ECU Online Coding with 50+ Services Upgraded of X431 V+, Bi-Directional Diagnostic Scanner, with SmartBox 3.0 CANFD & DOIP, 2 Years Update
  • 👍【Why Choose LAUNCH scanner X431 PRO5】It is the original LAUNCH X431 scan tool, the 2023 upgraded version of PROS V+, X431 PRO3 and V+ 4.0, which is a worthwhile investment for repair shops and mechanics. LAUNCH X431 PRO 5, all is set to OE-level standards with 1) J2534 ECU Programming & 50+ service same as PAD Series; 2) Bi-directional control + All system diagnostics as Snap-on scanner; 3) Online Coding functions directly connect to OEM server; 4) support 150+ brands Wordlwide from 1996-2023.
  • 👍【J2534 Programming with Smart Box 3.0】 What is super SmartBox 3.0 VCI? Worth 1000$, Smart Box 3.0 is backed on new J2534/CANFD/DOIP, which enables you to run 14x quicker data trans and advanced OEM J2534 reprogramming for B-MW, Ben-z, F-ord, Jaguar, Land Rover, GW, Volvo, etc. (please reach to us for more details). It also serves as a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical connection.
  • 👍【LAUNCH X431 PRO 5 with Powerful 50+ Services】Especially designed for pro mechanics and big repair shops, Launch X431 scanner PRO5 is equipped with 50+ hot reset functions for 150 car makes which same as X431 PAD serious. Easy to navigate and help you do ABS Bleeding, TPMS Reset, Oil Reset, EPB Reset, Suspension, BMS, Injector Coding, IMMO, Power balance, Throttle Matching and more. 🚩Notice: we offer 2-year f ree update while other brands generally 1 year.
  • 👍【A-ctive Test + Local-smith Level ECU Coding】Come with appealing bi-directional control to troubleshoot all possible problems for full systems within 5 minutes. This LAUNCH X431 PRO scanner even develops all practical functions needed by all technicians: 1) ECU Coding for replacing, match, relearn, recode new ECU modules; 2) Online Coding for B-MW, VW, Porsche, Ben-z to surf OEM data; 3) VAG Guided functions ease complex issues; 4) Personalization & ADAS improving car performance and driving safety.
  • 👍【All System Diagnostics for 99% Vehicle Coverage] Serve for 150+ American, Asian, European brands, and cover 99% of vehicle models worldwide. This LAUNCH diagnostic scan tool can operate complete full-function diagnostics to all on-board systems to troubleshoot and repair all vehicle problems, including Engine, Transmission, Airbag, ABS, ESP, TPMS, Immobilizer, Gateway, Steering, Radio, Air Conditioning, etc.

Last update on 2023-02-25 / Affiliate links / Images from Amazon Product Advertising API

This product was presentation was made with AAWP plugin.

 

Leave a Comment

Share to...