NUMBER: 08-122-15
GROUP: Electrical
DATE: December 18, 2015
THE wiTECH SOFTWARE IS REQUIRED TO BE AT THE LATEST RELEASE BEFORE PERFORMING THIS PROCEDURE.
SUBJECT:
Tire Pressure Monitor C1012-88 C1015-88
OVERVIEW:
This bulletin involves performing a wiTECH Misc-Function routine, for proper operation of the Tire Pressure Monitor (TPM) feature.
MODELS:
| 2015-2016 | (FF) | Fiat 500 |
NOTE: This bulletin applies to vehicles within the following markets/countries: NAFTA.
NOTE: This bulletin applies to vehicles built on or before July 10, 2015 (MDH 0710XX) equipped with Tire Pressure Monitoring Display (Sales Codes XGM).
DISCUSSION:
SYMPTOM/CONDITION:
The customer may notice that the TPM lamp is illuminated. On further inspection the technician may find Diagnostic Trouble Codes (DTCs) C1012-88 TPM Sensor Location Undetermined - BUS off, and/or C1015-88 Front/Rear Tire Pressure Sensor Location Undetermined.
DIAGNOSIS:
Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in TechCONNECT, verify if any DTCs are set. If DTCs or symptom conditions, other than the ones listed above are present, record the issues on the repair order and repair as necessary before proceeding further with this bulletin.
If the customer describes the symptom/condition listed above or if the technician finds the DTCs, perform the Repair Procedure.
REPAIR PROCEDURE:
NOTE: If other TPM DTCs are set, this repair procedure will NOT correct all of the customer concerns. Normal diagnostics need to be performed.
- Connect the wiTECH to the vehicle and go into the Misc-Function under TPM tab.
NOTE: If the routine cannot be found, the scan tool doesn’t have the latest software level.
- Perform Misc-Function routine named “Reduce TPM Localization Threshold”. Follow all scan tool screen prompts.
- Clear any DTCs that may have been set performing this routine.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
| Labor Operation No: | Description | Skill Category | Amount |
|---|---|---|---|
| 18-19-28-96 | Module, Tire Pressure (TPM) - Run Misc Function Routine (0 - Introduction) | 6 - Electrical and Body Systems | 0.2 Hrs |
FAILURE CODE:
| ZZ | Service Action |
08-122-15
https://www.nhtsa.gov/recalls?nhtsaId=10074642
https://static.nhtsa.gov/odi/tsbs/2015/SB-10074642-2280.pdf
Loading...
Reload document
Open in new tab
Bestseller No. 1
Autel Scanner MK908P, BT100 Battery Tester, Automotive Diagnostic Tool MK908P with J2534 Reprogramming, ECU Coding, Active Test, 25 Service Functions, Upgraded MS908P MaxiSys Pro
- 【Strongest Combination】 : Combination with All-five star BT100 battery tester, answers you after an overall analysis of batteries health by checking its voltage charge, internal resistance and aging status. This battery tester runs cranking and charging system test and alternator charging.Unique smart 3 LED indicators directly show the battery status whether it is good, bad, or need to recharge.
- 【ECU Programming】 : Besides the OE-level comprehensive diagnostic and service functions, MK908P can support ECU programming and coding on most Benz and BMW car models with J2534 and diagnostic software on the tablet.It helps to match the electronic control unit with new components after repair and replacement for any professional mechanics and technicians.
- 【All-around Diagnosis】 : This MK908P diagnostic device can access to vehicles all systems and subsystems. Guided functions are covered for VAG group. Power balance and offline coding can be supported on Ford. Proxy alignment is there for Fiat. Hiding / customization / personalization functions are covered for car makes such as BWM, VAG, Toyota etc.
- 【Online Functions】: There is online coding for VW & Audi and Porsche. Online configuration for Renault is unique among diagnostic industries. There are basic diagnostic functions and most service / special functions available for Lamborghini, Ferrari, Aston Martin and Maserati etc.
- 【Ultimate Scanner】 : Being MS908P upgraded, MK908P is our latest and most sophisticated diagnostic scanner which boasts the best hardware including Hexa-CPU, 2GB RAM etc. for fast boot-up and multitasking. Displays live data in text, graph, analog and digital gauge for intuitive analysis.
SaleBestseller No. 2
Autel Maxisys Pro MK908P, Top OBD2 Diagnostic Scanner with J2534 Reprogramming, ECU Coding, Active Test, 30+ Service Functions, Same as Maxisys Elite, MS908P, Free Car Battery Tester AB101 is Given
- 🚗【Advanced J2534 ECU PROGRAMMING】: Autel diagnostic scanner MK908P comes with a SAE J2534-1 & -2 compliant Pass-Thru interface, which allows you to program ECUs for Benz/BMW . This helps to update the existing software/firmware of your vehicles, and fix software-controlled drivability & emission issues. Sounds complicated, but this is easy to do and we are 24 hours here for help. Any questions, contact [email protected] for help.
- 🚗【Same as Maxisys Elite, Updated of Maxisys Pro】: With just the same function as Autel Maxisys Elite, upgraded of MS908S PRO, MS908E, Autel scan tool MK908P is much more cost-effective. OE-level obd2 scanner MK908P supports coding functions on 98% vehicle makes. The online coding is compatible with VW & Audi & Porsche & Benz/BMW, and its online configuration for Renault is unique among diagnostic industries.
- 🚗【Advanced Special Functions for Professionals】: Full system diagnostic scanner MK908P enjoys 30+ professional service functions like Oil Reset, EPB, BMS, SAS, DPF, TPMS, and IMMO Service, etc. Besides, MK908P has guided functions which are covered for VAG group. Power balance and offline coding can be supported on Ford. Proxy alignment is there for Fiat. Hiding / customization / personalization functions are covered for car makes such as BWM, VAG, Toyota etc.
- 🚗【Wide Vehicle Coverage for Repairing Shops】: Autel Diagnostic Scanner MK908P has wide vehicle coverage for more than 80 US, Asian and European vehicle makes, ideal for experienced mechanics and garage to do professional repairing and maintenance. With luxury car makes coverage, basic diagnostic functions and most special/service functions of MK908P are compatible with Lamborghini, Ferrari, Aston Martin and Maserati etc.
- 🚗【Free Gift of Car Battery Tester AB101】: Priced at 49$, car battery tester is recommended by Scotty Kilmer and BestReviews. It directly detects the battery data and give suggestions on whether to replace the battery. This 12v car auto battery load tester is convenient for you to know the condition of cranking and charging system. Any questions, contact [email protected] for sure.
Bestseller No. 3
ANCEL FX4000 All System Automotive OBD2 Scanner Car Code Reader Vehicle OBDII Diagnostic Scan Tool for Check Engine ABS SRS Transmission EPB ESP SAS TPMS
- OBD II & CAN compatible (most 1996 and newer domestic and import vehicles). Diagnose both Diesel and Gasoline powered vehicles. This powerful scan tool is designed to check Engine Transmission, ABS, SRS (Airbag), EPB, Oil service reset, SAS Steering Angle, and other system diagnostics.
- Supports over 40 global car brands after MOST 1996 US, 2001 European, 2003 Asian and newer OBD2/EOBD vehicles. With the enhanced OBD2 engine test, it can scan more than 95% of old domestic vehicles for read/clear pending and stored codes, read freeze frame, view live data stream (in text/graphic format), O2 sensor test, emission test, I/M readiness test, etc.
- The unique FN hot key allows customization of your own Favorites on the main menu for the next car test directly. This is very convenient for the Mechanic and the DIYer. Multi-language is available (English, Spanish, French, Polish, Russian, Japanese, Italian, Korean, German, and Dutch).
- It does not require any battery or charger. It gets power directly from the OBDII Data Link Connector in your vehicle. Once plugged into your vehicle's 16pin OBDII DLC, the unit will power up and prompt you to start your ignition.
- FX4000 OBD2 scanner is well built with a large and high-definition TFT screen, easy-to-read UI, and thousands of DTC tips. Anti-skid & gaming handheld design gives you a different experience on holding an auto scan tool. Lifetime free updates online to fix the latest bugs or add newer parameters. Please don't hesitate to contact us if you have any questions.
Bestseller No. 4
Autel MaxiCOM MK808 OBD2 Diagnostic Scan Tool with All System basic diagnostic functions and combination of Service Functions including Oil Reset, EPB, BMS, SAS, DPF, TPMS
- 【MULTIFUNCTIONAL SCAN TOOL】 Once accessed to the Diagnostics service of MaxiCOM MK808 scan tool, here are a variety of functions available including oil reset and EPB/BMS/SAS/ DPF, Basic TPMS service(MK808 could not program tire sensor), which are used for the safety and efficient maintenance of systems.
- 【FULL SYSTEM DIAGNOSES】 With so many special services, the full system diagnosed will not absent. This diagnostic tool will give your car a full detection for ALL systems (ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System . etc. ).
- 【WIDE VEHICLE COVERAGE】 Autel MaxiCOM MK808 code reader works on most 1996 US-based, 2000 EU-based and newer vehicles to do the full systems diagnoses including reading/clearing codes and viewing live data to check the health status of parts.To check wheather MK808 is compatible with your car or ask other questions, please send VIN number [email protected]
- 【USER-FRIENDLY】 This is a tablet diagnostic scanner with 7＂touchable screen and enables sensitive response with fast quad-core process; it is better than Autel md808/md808 pro and MX808. Compare with MK808BT, MK808 just without the VCI, but use cable connection could provided the quick and stable diagnosis speed.
- 【Please Be Informed】 12-month warranty and 1 year free online update are offered. Besides, 30-day free return service is available. Note:MK808 is compatible with most vehicle makes, but to make sure MK808 can run super smoothly on your car, please send VIN number to [email protected] or ask through Q/A. Any problems, we are 24-hours for you.
Bestseller No. 5
Autel (Maxisys Pro) MK908P Automotive Diagnostic Scan Tool Advanced Full System Scanner with ECU Coding and J2534 ECU Programming With TS401
- OE-Level OBD Scanner: The diagnostic tool serves as the most advanced automotive diagnostic tool, comes with a J2534 ECU programming device that helps Benz and BMW users replace the existing software/firmware in the ECU, program new ECUs and fix software-controlled driving performance and emission issues. Welcom to contact [email protected] or ask through Q&A for your specific need and to ensure the vehicle compatibility
- All-system Diagnose & Active Test: Provided with full-systems diagnosis(ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System, etc.). The diagnostic tool supports bi-direction control to check the vehicle operating conditions. The bi-directional control of the ECM in Component Test enables the MK908P to transmit control commands to operate the vehicle systems
- 30+ Service Functions: As the advanced version of MS908P,MS908S,MS908E, MS908PS PRO, MK908P also offers another 30+ service functions to help your repairing work faster, easier, and more professional, These service functions include immo keys/throttle/injecor coding/trans adaption/suspension/tyre retrofit/DPF/brake bleed/oil reset and more
- Broad Compatibility: The software of MK908P has a wide range of compatibility and can be used to diagnose vehicles from over 80 brands in the US, Europe and Asia. Moreover, you can get more newly added car models with the fast-release software update service. The MaxiFix provides you with an online troubleshooter database, and Remote Desk allows you to get help from others via TeamViewer software
- With TS401 TPMS Relearn Tool: Since MK908P only supports basic detection functions for TPMS, so it is equipped with TS401, a powerful TPMS tire pressure reset tool, which can help you to program a sensor and do the Relearn procedure
SaleBestseller No. 6
FOXWELL NT301 OBD2 Scanner Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light
- 【Vehicle CEL Doctor】The NT301 obd2 scanner enables you to read DTCs, locate bad O2 sensors, access to emissions readiness status, turn off CEL(check engine light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle.
- 【Accuracy】Live data graphing and logging. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend.
- 【Worthy to Own】Recommended by Mechanic Scotty Kilmer on Youtube. Codes analysis and Printer compatible. Unique PATENTED design, 2.8" color screen, Free Lifetime Update and 1-year seller assurance with EXCLUSIVE tech and service team.
- 【Smog Check Helper】Read/Erase and I/M readiness hotkeys make it easy to use the car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for confident emissions test.
- 【Home Necessity】Open to global customers. No battery required, NT301 obd scanner is charged directly from the 16pin DLC in your vehicle. It is recommended as a necessity in your toolbox and one of the best gifts for Home and Autoshop Mechanics.
Bestseller No. 7
Autel MaxiCOM MK908P Diagnostic Scanner Automotive Scan Tool with ECU Programming and J2534 Reprogramming + Free Oscilloscope MaxiScope MP408
- 【SUPERIOR CODING & PROGRAMMING】 Supports coding and programming especially for BMW and Mercedes. With the VCI of MK908P for SAE J2534-1 and J2534-2 protocols, it can replace the existing software and firmware in ECU without expensive original equipment.
- 【WIDE DIAGNOSTIC SOLUTIONS】 Well capable of VCM coding and programming, TPMS coding, intelligent cruise control (ICC), ECU coding, live data, dashboard matching, airbag system reset, anti-theft key matching and more.
- 【POWERFUL DIAGNOSTIC TOOL】 The oscilloscope MP408 combine with MaxiCOM MK908P is able to measure and test virtually all the electrical and electronic components and circuits in any modern vehicles, providing you an insight to the inner workings of a vehicle’s electronic circuits.
- 【HIGH-EFFICIENCY OF USE】 Being MS908P upgraded, it is Autel’s latest and most sophisticated diagnostic scanner which boasts the best hardware including Hexa-CPU, 2GB RAM etc. for fast boot-up and multitasking, and the ergonomic design to resist damage of heavy use.
- 【WARRANTY & UPDATE】 You can get quality related services within 12 months warranty, besides, 12 months free online update is available for the latest bug fixes and newly added parameters and car models.
Bestseller No. 8
Autel Scanner Maxisys MS906 Automotive Diagnostic Scan Tool (Advanced Version of MaxiDAS DS708 DS808 MK906) with ECU Coding, Key Coding, Bi-Directional Control, Oil Reset, ABS, SRS, DPF, EPB, TPMS
- 【ACTIVE TEST】: Autel MS906 diagnostic scan tool supports active test, allowing you to input commands into the ECU, check the integrity of the vehicle’s system or parts by monitoring the operation of the actuators. Vehicle components, such as wipers, door controls, windows, air conditioners, engine fans, idle control could be well checked with this function.
- 【SERVICE FUNCTIONS】: Autel MS906 comes with 25 useful service functions after update including Oil Reset, EPB, TPMS, BMS, Brake bleed, DPF, IMMO keys, Injector, SAS, Suspension, Throttle, WIN DR ROOF, SEATS, Odometer, Lang change, Headlamp, CHG tire SIZE, TEC learn. These special functions are all-round, reliable, powerful, running super fast, time-saving and cost-effective for a professional mechanics.
- 【Full System DIAGNOSTICS & ECU coding】: MS906 accesses full system diagnostics, involves ABS, SRS, Body, Chassis, Powertrain, Electronic, Engine, Transmission, etc. It also gives the capability of ECU coding to change programmed options which already existent in the software. NOTE: The ECU coding is not universally compatible with all vehicles. Please send VIN number to [email protected] to make sure and welcome to contact us for any problem.
- 【Why MaxiSys MS906 Is Super Fast】: MS906 is based on the Android operating system and is featured with an extensive coverage of OE-level diagnostics. Built with Exynos 5260 6-core processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15), a 32G SSD hard drive and an 8’’ capacitive HD touch screen, MaxiSys MS906 could efficiently provides comprehensive analysis in seconds.
- 【Worry-Free SERVICE】:With 1-year warranty, 12 month free updatem, Cloud-based MaxiFix online community, if you think it doesn’t meet your need, just return it. For any problems, we are 24 hours here. Note: 1)The default language of MS906 is English. 2)MS906 supports the Audi /Volkswagen Guided Functions, the basic Audi/Volkswagen Individualisation and the control unit replacement of all models (except the models or modules that need to be programmed online).
Bestseller No. 9
Autel Maxisys Pro MK908P(MS908P/MS908SP) OBD2 Diagnostic Scanner for ECU Coding, Active Test, J2534 Reprogramming (Same as Maxisys Elite, Upgraded Version of Maxisys Pro) with Free Car Battery Tester
- 🚗ECU PROGRAMMING: This Diagnostic scanner comes with a SAE J2534-1 & -2 compliant PassThru reprogramming interface device which allows you to use the updated OEM software to replace the existing software/firmware in ECUs, programming new ECUs for Benz/BMW and fixing software-controlled drivability issues and emission issues.
- SUPERIOR HARDWARE: The Maxicom MK908P is a upgraded version of the Maxisys Ms908P/Pro,it with Android4.4 based system amd super-fast hexa-core Processor, 2GM RAM, 64GB On-board Memory, 8.0 Megapixel rear cam, ultra-clear 10.1 inches LED screen etc.
- 🚗COMPREHENSIVE FUNCTIONS: Autel MaxiCOM MK908P performs the same function as Autel Maxisys Elite, Autel MS908S PRO, MS908E, and provide better price. this superior diagnostic device is awarded as the Best Vehicle Diagnostic Tool in Britain.12-month free updates，basic functions could still be used without updates
- 🚗WIDE VEHICLE COVERAGE: Extensive OE-Level vehicle coverage for more than 80 US, Asian and European vehicle makes.It’s an ultimate car scanner for DIYers, experienced mechanics, even garage to finish professional-level vehicle repair and maintenance.
- 🚗Multi-ADD ONS:This Autel Scanner could connect the Oscilloscope-MaxiScope MP408 and Digital Inspection Cameras for vehicle’s electronic test or get the sight in the tight spaces. We offer you a free ArtiBattery101, making you easily get the Battery Test Results. This car battery Tester is recommended by Soctty Kilmer and BestReviews. It can directly detect the battery data and give suggestions on whether to replace the battery. It also has cranking test and charging system test.
Last update on 2020-09-22 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2020-09-22 / Affiliate links / Images from Amazon Product Advertising API
