92A – Disabled Reverse Lights and Camera – 2022-2023 Jeep Wrangler & Gladiator

SEOCONTENT-START

OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-641 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Chrysler (FCA US, LLC) Submission Date : SEP 18, 2023 NHTSA Recall No. : 23V-641 Manufacturer Recall No. : 92A Manufacturer Information : Manufacturer Name : Chrysler (FCA US, LLC) Address : 800 Chrysler Drive CIMS 482-00-91 Auburn Hills MI 48326-2757 Company phone : 1-800-853-1403 Population : Number of potentially involved : 6,298 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2022-2023 Jeep Wrangler Vehicle Type : Body Style : SUV Power Train : NR Descriptive Information : Some 2022-2023 MY Jeep Wrangler vehicles may have been built with a manual transmission with an improperly manufactured all gear sensor (“AGS”) which may cause the reverse lights and back-up camera to be disabled. The suspect period began on February 7, 2022, when manual transmissions with improperly manufactured AGSs were introduced into vehicle production, and ended on May 6, 2023, when production of 2023 MY vehicles with manual transmissions ended. The suspect period was determined using supplier and vehicle production records. Similar vehicles not included in this recall were manufactured before the suspect period or were not equipped with a manual transmission. The total affected vehicles for this model is 4,530. Production Dates : FEB 07, 2022 – MAY 06, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 23V-641 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 2 : 2022-2023 Jeep Gladiator Vehicle Type : Body Style : PICKUP TRUCK Power Train : NR Descriptive Information : Some 2022-2023 MY Jeep Gladiator vehicles may have been built with a manual transmission with an improperly manufactured AGS which may cause the reverse lights and back-up camera to be disabled. The suspect period began on February 7, 2022, when manual transmissions with improperly manufactured with AGSs were introduced into vehicle production, and ended on February 21, 2023, when production of 2023 MY vehicles with manual transmissions ended. The suspect period was determined using supplier and vehicle production records. Similar vehicles not included in this recall were manufactured before the suspect period or were not equipped with a manual transmission. The total affected vehicles for this model is 1,768. Production Dates : FEB 07, 2022 – FEB 21, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : Federal Motor Vehicle Safety Standard (“FMVSS”) No. 571.111 S6.2.6 requires that “The rear visibility system default to the rearview image being visible and meet the requirements of FMVSS No. 571.111 S6.2.1 (field of view) and S6.2.2 (image size) at the beginning of each backing event, regardless of any modifications to the field of view that the driver had previously selected…”. FMVSS No. 571.108 requires that backup lamps “Must be activated when the ignition switch is energized and reverse gear is engaged.” Vehicles with suspect AGSs may not display the rearview image or activate the backup lamps during a backing event. FMVSS 1 : 111 – Rear visibility FMVSS 2 : 108 – Lamps, reflective devices, and assoc. Equipment Description of the Safety Risk : The vehicle operator will notice that the rearview image is not displayed if attempting to reference the image while backing. If this warning is not heeded, backing without verifying it is safe to do so could lead to an increased risk of injury to people outside the vehicle. Failure to illuminate the backup lamps may not adequately illuminate the roadway behind the vehicle or indicate to other drivers or pedestrians the intention to backup, which can cause a crash without prior warning. Description of the Cause : NR Part 573 Safety Recall Report 23V-641 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Identification of Any Warning that can Occur : For the rearview camera, the driver will notice that the image is not displayed when the vehicle is placed into reverse. For the backup lamps, none. Involved Components : Component Name 1 : Transmission Component Description : Manual Transmission Assembly Component Part Number : 05106257AF, 05106257AG Supplier Identification : Component Manufacturer Name : Aisin World Corporation of America Address : 15300 Centennial Drive Northville Michigan 48168 Country : United States Chronology : • On April 24, 2023, the FCA US LLC (“FCA US”) Technical Safety and Regulatory Compliance (“TSRC”) organization was notified of a potential issue related to the AGS on some Jeep Wrangler and Jeep Gladiator vehicles. • From April 25, 2023, through August 11, 2023, FCA US TSRC met with FCA US engineering to review the issue, understand part design and failure mode, and to determine the suspect population. • On August 16, 2023, the FCA US TSRC organization recognized a vehicle build issue existed on certain vehicles related to a condition that can lead to the lack of rearview visibility and rearview lamps, potentially causing a noncompliance with FMVSS No. 111 and No. 108. • On September 11, 2023, FCA US determined, through the Vehicle Regulations Committee, to conduct a voluntary safety recall of the affected vehicles. Part 573 Safety Recall Report 23V-641 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : FCA US will conduct a voluntary safety recall on all affected vehicles to replace the AGS. FCA US has a longstanding policy and practice of reimbursing owners who have incurred the cost of repairing a problem that subsequently becomes the subject of a field action. To ensure consistency, FCA US, as part of the owner letter, will request that customers send the original receipt and/or other adequate proof of payment to the company for confirmation of the expense. How Remedy Component Differs from Recalled Component : The remedy component is a correctly manufactured AGS. Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : **09/18/2023: FCA US will notify dealers and begin notifying owners on or about 11/07/2023. Planned Dealer Notification Date : NOV 07, 2023 – NOV 07, 2023 Planned Owner Notification Date : NOV 07, 2023 – NOV 07, 2023 * NR – Not Reported

**************************************************************************************************************

09/19/2023 _____________________________________________________________________ New Safety Recall Advanced Communication – 92A FCA US LLC (FCA US) has announced a safety recall on certain 2022 and 2023 model year (JL) Jeep® Wrangler and (JT) Jeep® Gladiator vehicles equipped with a manual transmission. REASON FOR THIS SAFETY RECALL Some manual transmissions have been built with an improperly manufactured Gear Position Sensor / All Gear Sensor (AGS) which may cause the reverse lights and back-up camera to be disabled. Vehicles with a suspect Gear Position Sensor / AGS may not display the rearview image or activate the backup lamps during a backing event. The vehicle operator will notice that the rearview image is not displayed if attempting to reference the image while backing. If this warning is not heeded, backing without verifying it is safe to do so could lead to an increased risk of injury to people outside the vehicle. Failure to illuminate the backup lamps may not adequately illuminate the roadway behind the vehicle or indicate to other drivers or pedestrians the intention to backup, which can cause a crash without prior warning. The condition described above does not comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 571.111 S6.2.6 requires that “The rear visibility system default to the rearview image being visible and meet the requirements of FMVSS No. 571.111 S6.2.1 (field of view) and S6.2.2 (image size) at the beginning of each backing event, regardless of any modifications to the field of view that the driver had previously selected…”. FMVSS No. 571.108 requires that backup lamps “Must be activated when the ignition switch is energized and reverse gear is engaged.” SERVICE ACTION FCA US will conduct a voluntary safety recall to replace the Gear Position Sensor / AGS. The remedy for this condition is not currently available. Dealers will be notified of the launch of this safety recall by way of established communication methods. This recall is estimated to launch in 4th Quarter of 2023. We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries regarding involved vehicles. Customer Services Field Operations FCA US LLC

**************************************************************************************************************

OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-641 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Chrysler (FCA US, LLC) Submission Date : SEP 18, 2023 NHTSA Recall No. : 23V-641 Manufacturer Recall No. : 92A Manufacturer Information : Manufacturer Name : Chrysler (FCA US, LLC) Address : 800 Chrysler Drive CIMS 482-00-91 Auburn Hills MI 48326-2757 Company phone : 1-800-853-1403 Population : Number of potentially involved : 6,298 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2022-2023 Jeep Wrangler Vehicle Type : Body Style : SUV Power Train : NR Descriptive Information : Some 2022-2023 MY Jeep Wrangler vehicles may have been built with a manual transmission with an improperly manufactured all gear sensor (“AGS”) which may cause the reverse lights and back-up camera to be disabled. The suspect period began on February 7, 2022, when manual transmissions with improperly manufactured AGSs were introduced into vehicle production, and ended on May 6, 2023, when production of 2023 MY vehicles with manual transmissions ended. The suspect period was determined using supplier and vehicle production records. Similar vehicles not included in this recall were manufactured before the suspect period or were not equipped with a manual transmission. The total affected vehicles for this model is 4,530. Production Dates : FEB 07, 2022 – MAY 06, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 23V-641 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 2 : 2022-2023 Jeep Gladiator Vehicle Type : Body Style : PICKUP TRUCK Power Train : NR Descriptive Information : Some 2022-2023 MY Jeep Gladiator vehicles may have been built with a manual transmission with an improperly manufactured AGS which may cause the reverse lights and back-up camera to be disabled. The suspect period began on February 7, 2022, when manual transmissions with improperly manufactured with AGSs were introduced into vehicle production, and ended on February 21, 2023, when production of 2023 MY vehicles with manual transmissions ended. The suspect period was determined using supplier and vehicle production records. Similar vehicles not included in this recall were manufactured before the suspect period or were not equipped with a manual transmission. The total affected vehicles for this model is 1,768. Production Dates : FEB 07, 2022 – FEB 21, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : Federal Motor Vehicle Safety Standard (“FMVSS”) No. 571.111 S6.2.6 requires that “The rear visibility system default to the rearview image being visible and meet the requirements of FMVSS No. 571.111 S6.2.1 (field of view) and S6.2.2 (image size) at the beginning of each backing event, regardless of any modifications to the field of view that the driver had previously selected…”. FMVSS No. 571.108 requires that backup lamps “Must be activated when the ignition switch is energized and reverse gear is engaged.” Vehicles with suspect AGSs may not display the rearview image or activate the backup lamps during a backing event. FMVSS 1 : 111 – Rear visibility FMVSS 2 : 108 – Lamps, reflective devices, and assoc. Equipment Description of the Safety Risk : The vehicle operator will notice that the rearview image is not displayed if attempting to reference the image while backing. If this warning is not heeded, backing without verifying it is safe to do so could lead to an increased risk of injury to people outside the vehicle. Failure to illuminate the backup lamps may not adequately illuminate the roadway behind the vehicle or indicate to other drivers or pedestrians the intention to backup, which can cause a crash without prior warning. Description of the Cause : NR Part 573 Safety Recall Report 23V-641 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Identification of Any Warning that can Occur : For the rearview camera, the driver will notice that the image is not displayed when the vehicle is placed into reverse. For the backup lamps, none. Involved Components : Component Name 1 : Transmission Component Description : Manual Transmission Assembly Component Part Number : 05106257AF, 05106257AG Supplier Identification : Component Manufacturer Name : Aisin World Corporation of America Address : 15300 Centennial Drive Northville Michigan 48168 Country : United States Chronology : • On April 24, 2023, the FCA US LLC (“FCA US”) Technical Safety and Regulatory Compliance (“TSRC”) organization was notified of a potential issue related to the AGS on some Jeep Wrangler and Jeep Gladiator vehicles. • From April 25, 2023, through August 11, 2023, FCA US TSRC met with FCA US engineering to review the issue, understand part design and failure mode, and to determine the suspect population. • On August 16, 2023, the FCA US TSRC organization recognized a vehicle build issue existed on certain vehicles related to a condition that can lead to the lack of rearview visibility and rearview lamps, potentially causing a noncompliance with FMVSS No. 111 and No. 108. • On September 11, 2023, FCA US determined, through the Vehicle Regulations Committee, to conduct a voluntary safety recall of the affected vehicles. Part 573 Safety Recall Report 23V-641 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : FCA US will conduct a voluntary safety recall on all affected vehicles to replace the AGS. FCA US has a longstanding policy and practice of reimbursing owners who have incurred the cost of repairing a problem that subsequently becomes the subject of a field action. To ensure consistency, FCA US, as part of the owner letter, will request that customers send the original receipt and/or other adequate proof of payment to the company for confirmation of the expense. How Remedy Component Differs from Recalled Component : The remedy component is a correctly manufactured AGS. Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : **09/18/2023: FCA US will notify dealers and begin notifying owners on or about 11/07/2023. Planned Dealer Notification Date : NOV 07, 2023 – NOV 07, 2023 Planned Owner Notification Date : NOV 07, 2023 – NOV 07, 2023 * NR – Not Reported

**************************************************************************************************************

**************************************************************************************************************

**************************************************************************************************************

SEOCONTENT-END