Water In Driver Foot Well – Park Release Cable Grommet Not Seated – 2015 Ram 1500 Pickup

“This site contains affiliate links for which OEMDTC may be compensated”

NUMBER: 23-026-15
GROUP: Body
DATE: June 17, 2015

 

THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE TRANSMITTAL (RRT) 15-069. ALL APPLICABLE SOLD AND UN-SOLD RRT VIN’s HAVE BEEN LOADED. TO VERIFY THAT THIS RRT SERVICE ACTION IS APPLICABLE TO THE VEHICLE, USE VIP OR PERFORM A VIN SEARCH IN TECHCONNECT. ALL REPAIRS ARE REIMBURSABLE WITHIN THE PROVISIONS OF WARRANTY.

 

SUBJECT:

Water In Driver Foot Well – Park Release Cable Grommet Not Seated

 

OVERVIEW:

This bulletin involves seating the manual park release cable grommet to the cowl.

 

MODELS:

2015 (DS) Ram 1500 Pickup

 

NOTE: This bulletin applies to vehicles built on or after May 07, 2015 (MDH 0507XX) and on or before May 12, 2015 (MDH 0512XX).

 

SYMPTOM/CONDITION:

The customer may describe water in the driver foot well. This water leak condition may be due to the manual park release cable grommet not being properly seated to the cowl during vehicle assembly.

 

DIAGNOSIS:

If a customer’s VIN is listed in VIP or your RRT VIN list, perform the repair. For all other customers that describe the symptom/condition listed above, perform the Repair Procedure.

 

REPAIR PROCEDURE:

NOTE: The manual park release cable grommet is located under the instrument panel on the driver side.

Inspect and if necessary, fully seat the manual park release cable grommet securely to the cowl (Fig. 1).

Fig. 1 Manual Park Release Cable GrommetFig. 1 Manual Park Release Cable Grommet

1 – Grommet Location
2 – Grommet Unseated
3 – Grommet Properly Seated


NOTE: If the customer described water in the driver foot well and grommet was not found to be loose, normal diagnosis for water leaks may be necessary.

 

POLICY:

Reimbursable within the provisions of the warranty.

 

TIME ALLOWANCE:

Labor Operation No: Description Skill Category Amount
21-75-24-91 Inspect / Seat The Park Release Cable Grommet (1 – Semi-Skilled) 6 – Electrical and Body Systems 0.2 Hrs.

 

FAILURE CODE:

ZZ Service Action

 


 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [77.94 KB]

 


 

Leave a Comment

Share to...