NUMBER: 18-062-16 GROUP: Vehicle Performance DATE: June 04, 2016 THIS BULLETIN SUPERSEDES SERVICE BULLETIN 18-055-15, DATED SEPTEMBER 03, 2015, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE ADDITIONAL DIAGNOSTIC TROUBLE CODES (DTCs) AND LABOR OP. FOR HELP WITH USING wiTECH FOR ECU FLASH REPROGRAMMING, CLICK ON THE APPLICATION’S “HELP” TAB. THE … Read more
NUMBER: 18-029-15 GROUP: Vehicle Performance DATE: April 08, 2015 HELP USING THE wiTECH DIAGNOSTIC APPLICATION FOR FLASHING AN ECU IS AVAILABLE BY SELECTING “HELP” THEN “HELP CONTENTS” AT THE TOP OF THE wiTECH DIAGNOSTIC APPLICATION WINDOW. THE wiTECH SOFTWARE LEVEL MUST BE AT 15.04 OR HIGHER TO PERFORM THIS PROCEDURE. SUBJECT: Flash: Engine … Read more
NUMBER: 08-016-08 GROUP: Electrical DATE: April 22, 2008 SUBJECT: Rough Idle and/or MIL Illumination For Any Of The Following DTC’s: P0300 / P0301 / P0302 / P0303 / P0304 / P0315 / P0335 and/or P0606. OVERVIEW: This bulletin involves replacing the terminals in the Crankshaft Sensor (CKP) connector. Some vehicles were built with incorrect … Read more
NUMBER: 18-011-12 GROUP: Vehicle Performance DATE: March 15, 2012 SUBJECT: Flash: MIL Illumination With Transmission And Driveability Improvements OVERVIEW: This bulletin involves flash reprogramming the Powertrain Control Module (PCM) with new software. MODELS: 2009 (HB) Durango 2009 (HG) Aspen 2010 (DJ) Ram 2500 Pickup 2009 – 2010 (DS) Ram 1500 Pickup 2009 … Read more